From: jassisinghbrar@gmail.com (Jassi Brar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 9/9] ARM: S5PV310: Add audio platform devices
Date: Thu, 18 Nov 2010 18:21:17 +0900 [thread overview]
Message-ID: <1290072077-17573-1-git-send-email-jassisinghbrar@gmail.com> (raw)
In-Reply-To: <AANLkTinPtkFccbrZ+-2244-=uK-83M_FSB3ZXOTuiNFw@mail.gmail.com>
From: Jassi Brar <jassi.brar@samsung.com>
Define platform devices for all audio devices found on S5PV310
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
arch/arm/mach-s5pv310/Makefile | 1 +
arch/arm/mach-s5pv310/dev-audio.c | 364 +++++++++++++++++++++++++++++
arch/arm/mach-s5pv310/include/mach/map.h | 16 ++
arch/arm/plat-samsung/include/plat/devs.h | 9 +
4 files changed, 390 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-s5pv310/dev-audio.c
diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile
index d265adb..61e3cb6 100644
--- a/arch/arm/mach-s5pv310/Makefile
+++ b/arch/arm/mach-s5pv310/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
# device support
+obj-y += dev-audio.o
obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_S5PV310_SETUP_I2C3) += setup-i2c3.o
diff --git a/arch/arm/mach-s5pv310/dev-audio.c b/arch/arm/mach-s5pv310/dev-audio.c
new file mode 100644
index 0000000..a196424
--- /dev/null
+++ b/arch/arm/mach-s5pv310/dev-audio.c
@@ -0,0 +1,364 @@
+/* linux/arch/arm/mach-s5pv310/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static const char *rclksrc[] = {
+ [0] = "busclk",
+ [1] = "i2sclk",
+};
+
+static int s5pv310_cfg_i2s(struct platform_device *pdev)
+{
+ /* configure GPIO for i2s port */
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 7, S3C_GPIO_SFN(2));
+ break;
+ case 1:
+ s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(2));
+ break;
+ case 2:
+ s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(4));
+ break;
+ default:
+ printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata i2sv5_pdata = {
+ .cfg_gpio = s5pv310_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+ | QUIRK_NEED_RSTCLR,
+ .src_clk = rclksrc,
+ },
+ },
+};
+
+static struct resource s5pv310_i2s0_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_I2S0,
+ .end = S5PV310_PA_I2S0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S0_TX,
+ .end = DMACH_I2S0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S0_RX,
+ .end = DMACH_I2S0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_I2S0S_TX,
+ .end = DMACH_I2S0S_TX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_i2s0 = {
+ .name = "samsung-i2s",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5pv310_i2s0_resource),
+ .resource = s5pv310_i2s0_resource,
+ .dev = {
+ .platform_data = &i2sv5_pdata,
+ },
+};
+
+static const char *rclksrc_v3[] = {
+ [0] = "sclk_i2s",
+ [1] = "no_such_clock",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+ .cfg_gpio = s5pv310_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_NO_MUXPSR,
+ .src_clk = rclksrc_v3,
+ },
+ },
+};
+
+static struct resource s5pv310_i2s1_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_I2S1,
+ .end = S5PV310_PA_I2S1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S1_TX,
+ .end = DMACH_I2S1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S1_RX,
+ .end = DMACH_I2S1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_i2s1 = {
+ .name = "samsung-i2s",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pv310_i2s1_resource),
+ .resource = s5pv310_i2s1_resource,
+ .dev = {
+ .platform_data = &i2sv3_pdata,
+ },
+};
+
+static struct resource s5pv310_i2s2_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_I2S2,
+ .end = S5PV310_PA_I2S2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S2_TX,
+ .end = DMACH_I2S2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S2_RX,
+ .end = DMACH_I2S2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_i2s2 = {
+ .name = "samsung-i2s",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5pv310_i2s2_resource),
+ .resource = s5pv310_i2s2_resource,
+ .dev = {
+ .platform_data = &i2sv3_pdata,
+ },
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 5, S3C_GPIO_SFN(3));
+ break;
+ case 1:
+ s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(3));
+ break;
+ case 2:
+ s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(3));
+ break;
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+ .cfg_gpio = s5pv310_pcm_cfg_gpio,
+};
+
+static struct resource s5pv310_pcm0_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_PCM0,
+ .end = S5PV310_PA_PCM0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM0_TX,
+ .end = DMACH_PCM0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM0_RX,
+ .end = DMACH_PCM0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_pcm0 = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5pv310_pcm0_resource),
+ .resource = s5pv310_pcm0_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource s5pv310_pcm1_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_PCM1,
+ .end = S5PV310_PA_PCM1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM1_TX,
+ .end = DMACH_PCM1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM1_RX,
+ .end = DMACH_PCM1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_pcm1 = {
+ .name = "samsung-pcm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pv310_pcm1_resource),
+ .resource = s5pv310_pcm1_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource s5pv310_pcm2_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_PCM2,
+ .end = S5PV310_PA_PCM2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM2_TX,
+ .end = DMACH_PCM2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM2_RX,
+ .end = DMACH_PCM2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv310_device_pcm2 = {
+ .name = "samsung-pcm",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5pv310_pcm2_resource),
+ .resource = s5pv310_pcm2_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev)
+{
+ return s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(4));
+}
+
+static struct resource s5pv310_ac97_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_AC97,
+ .end = S5PV310_PA_AC97 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_AC97_PCMOUT,
+ .end = DMACH_AC97_PCMOUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_AC97_PCMIN,
+ .end = DMACH_AC97_PCMIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_AC97_MICIN,
+ .end = DMACH_AC97_MICIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+ .cfg_gpio = s5pv310_ac97_cfg_gpio,
+};
+
+static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv310_device_ac97 = {
+ .name = "samsung-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pv310_ac97_resource),
+ .resource = s5pv310_ac97_resource,
+ .dev = {
+ .platform_data = &s3c_ac97_pdata,
+ .dma_mask = &s5pv310_ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+/* S/PDIF Controller platform_device */
+
+static int s5pv310_spdif_cfg_gpio(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 2, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static struct resource s5pv310_spdif_resource[] = {
+ [0] = {
+ .start = S5PV310_PA_SPDIF,
+ .end = S5PV310_PA_SPDIF + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_SPDIF,
+ .end = DMACH_SPDIF,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata samsung_spdif_pdata = {
+ .cfg_gpio = s5pv310_spdif_cfg_gpio,
+};
+
+static u64 s5pv310_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv310_device_spdif = {
+ .name = "samsung-spdif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pv310_spdif_resource),
+ .resource = s5pv310_spdif_resource,
+ .dev = {
+ .platform_data = &samsung_spdif_pdata,
+ .dma_mask = &s5pv310_spdif_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index 169fac2..5399446 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -65,6 +65,22 @@
#define S5PV310_PA_SROMC (0x12570000)
+/* S/PDIF */
+#define S5PV310_PA_SPDIF 0xE1100000
+
+/* I2S */
+#define S5PV310_PA_I2S0 0x03830000
+#define S5PV310_PA_I2S1 0xE3100000
+#define S5PV310_PA_I2S2 0xE2A00000
+
+/* PCM */
+#define S5PV310_PA_PCM0 0x03840000
+#define S5PV310_PA_PCM1 0x13980000
+#define S5PV310_PA_PCM2 0x13990000
+
+/* AC97 */
+#define S5PV310_PA_AC97 0x139A0000
+
#define S5PV310_PA_UART (0x13800000)
#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 2d82a6c..dec0ded 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -96,6 +96,15 @@ extern struct platform_device s5pv210_device_iis1;
extern struct platform_device s5pv210_device_iis2;
extern struct platform_device s5pv210_device_spdif;
+extern struct platform_device s5pv310_device_ac97;
+extern struct platform_device s5pv310_device_pcm0;
+extern struct platform_device s5pv310_device_pcm1;
+extern struct platform_device s5pv310_device_pcm2;
+extern struct platform_device s5pv310_device_i2s0;
+extern struct platform_device s5pv310_device_i2s1;
+extern struct platform_device s5pv310_device_i2s2;
+extern struct platform_device s5pv310_device_spdif;
+
extern struct platform_device s5p6442_device_pcm0;
extern struct platform_device s5p6442_device_pcm1;
extern struct platform_device s5p6442_device_iis0;
--
1.6.2.5
next prev parent reply other threads:[~2010-11-18 9:21 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-26 1:40 [PATCH 1/9] S5PV310: DMA: Add platform devices for PL330 DMACs Jassi Brar
2010-10-26 4:33 ` Kukjin Kim
2010-11-18 9:24 ` Jassi Brar
2010-11-18 9:20 ` Jassi Brar
2010-11-18 9:20 ` [PATCH 2/9] ARM: Samsung: Rename s3c64xx I2S platform device Jassi Brar
2010-11-18 9:20 ` [PATCH 3/9] ARM: Samsung: Prepare audio header for new I2S driver Jassi Brar
2010-11-18 9:20 ` [PATCH 4/9] ARM: S3C64XX: I2S: Upgrade platform device Jassi Brar
2010-11-18 9:21 ` [PATCH 5/9] ARM: S5P64X0: " Jassi Brar
2010-11-18 9:21 ` [PATCH 6/9] ARM: S5P6442: " Jassi Brar
2010-11-18 9:21 ` [PATCH 7/9] ARM: S5PC100: " Jassi Brar
2010-11-18 9:21 ` [PATCH 8/9] ARM: S5PV210: " Jassi Brar
2010-11-18 9:21 ` Jassi Brar [this message]
2010-11-29 6:52 ` [PATCH 9/9] ARM: S5PV310: Add audio platform devices Marek Szyprowski
2010-11-29 6:57 ` Jassi Brar
2010-11-18 11:27 ` [PATCH 1/9] S5PV310: DMA: Add platform devices for PL330 DMACs Mark Brown
2010-11-19 0:55 ` Kukjin Kim
2010-11-19 11:51 ` Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2010-10-26 1:41 [PATCH 9/9] ARM: S5PV310: Add audio platform devices Jassi Brar
2010-10-26 4:21 ` Kyungmin Park
2010-10-26 4:47 ` Jassi Brar
2010-10-26 4:59 ` Kyungmin Park
2010-10-26 5:30 ` Jassi Brar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290072077-17573-1-git-send-email-jassisinghbrar@gmail.com \
--to=jassisinghbrar@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).