[PATCH 0/3] S5PV210: added MIPI-DSI Driver.

[PATCH 0/3] S5PV210: added MIPI-DSI Driver.

[daeinki]

Hello all,

This patch is a MIPI-DSI driver for S5PV210.

PATCH 1/3: add a structure for CPU interface to linux/fb.h
- RGB or CPU interfaces could be used as display mode but framebuffer
framework doesn't consider CPU interface so I added this structure
because fb_cpumode structure could be used commonly.

PATCH 2/3: add parameters for CPU interface to plat-samsung/fb.h
- MIPI-DSI driver would use s3c-fb driver so I added some parameters
because MIPI-DSI driver supports CPU interface also.

PATCH 3/3: add MIPI-DSI driver for S5PV210.

thank you.

signed-off-by: Inki Dae <inki.dae@samsung.com>
signed-off-by: Kyoungmin Park <kyoungmin.park@samsung.com>

[PATCH 0/3] S5PV210: added MIPI-DSI Driver.

[Tomi Valkeinen]

Hi,

On Thu, 2010-11-18 at 19:43 +0900, ext daeinki wrote:
> Hello all,
> 
> This patch is a MIPI-DSI driver for S5PV210.
> 
> PATCH 1/3: add a structure for CPU interface to linux/fb.h
> - RGB or CPU interfaces could be used as display mode but framebuffer
> framework doesn't consider CPU interface so I added this structure
> because fb_cpumode structure could be used commonly.
> 
> PATCH 2/3: add parameters for CPU interface to plat-samsung/fb.h
> - MIPI-DSI driver would use s3c-fb driver so I added some parameters
> because MIPI-DSI driver supports CPU interface also.
> 
> PATCH 3/3: add MIPI-DSI driver for S5PV210.

You have three patches, all with the same subject, and no description.

Please check Documentation/SubmittingPatches.

 Tomi

[PATCH 0/3] S5PV210: added MIPI-DSI Driver.

[daeinki]

Hello all,

This patch is a MIPI-DSI driver for S5PV210.

PATCH 1/3: add a structure for CPU interface to linux/fb.h
- RGB or CPU interfaces could be used as display mode but framebuffer
framework doesn't consider CPU interface so I added this structure
because fb_cpumode structure could be used commonly.

PATCH 2/3: add parameters for CPU interface to plat-samsung/fb.h
- MIPI-DSI driver would use s3c-fb driver so I added some parameters
because MIPI-DSI driver supports CPU interface also.

PATCH 3/3: add MIPI-DSI driver for S5PV210.

driver features:
. Maximum resolution ranges up to XGA (1024x760)
. CSIS0 supports 1,2,3 or 4 data lanes
. CSIS1 supports 1 or 2 data lanes
. supports pixel format : 16bpp, 18bpp packed,
    18bpp loosely packed (3 byte format), and 24bpp
. supports RGB interface for video image from display controller
. support I80 interface for command mode image input from display controller
. supports PMS control inteerface for PLL to configure byte clock frequency
. supports Prescaler to generate escape clock from byte clock


thank you.

signed-off-by: Inki Dae <inki.dae@samsung.com>
signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

[PATCH 0/3] S5PV210: added MIPI-DSI driver.

[Inki Dae]

Hello all,

 

This patch is a MIPI-DSI driver for S5PV210.

 

PATCH 1/3 : add a structure for CPU interface to linux/fb.h

. RGB or CPU interface could be used as display mode but framebuffer
framework doesn't consider CPU interface

 So I added this structure because fb_cpumode structure could be used
commonly.

PATCH 2/3 : add parameters for CPU interface to plat-samsung/fb.h

. MIPI-DSI driver would use s3c-fb driver so I added some parameters because
MIPI-DSI driver supports CPU interface also.

PATCH 3/3 : add MIPI-DSI driver for S5PV210.

 

Thank you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20101118/baadb134/attachment-0001.html>

[PATCH 0/3] S5PV210: added MIPI-DSI driver.

[Paul Mundt]

On Thu, Nov 18, 2010 at 05:48:20PM +0900, Inki Dae wrote:
> This patch is a MIPI-DSI driver for S5PV210.
> 
For starters, this patch series is horribly line wrapped, even patchwork
seems to have given up on it on principle.

Please read through Documentation/email-clients.txt and resubmit
accordingly. Attachments will suffice if you have no other choice, but
should be a last resort.