From mboxrd@z Thu Jan  1 00:00:00 1970
From: catalin.marinas@arm.com (Catalin Marinas)
Date: Mon, 22 Nov 2010 13:00:10 +0000
Subject: [PATCH v2 01/20] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead
	of PGDIR_*
In-Reply-To: <20101122124353.GB31227@n2100.arm.linux.org.uk>
References: <1289584840-18097-1-git-send-email-catalin.marinas@arm.com>
	<1289584840-18097-2-git-send-email-catalin.marinas@arm.com>
	<20101122124353.GB31227@n2100.arm.linux.org.uk>
Message-ID: <1290430810.29754.9.camel@e102109-lin.cambridge.arm.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Mon, 2010-11-22 at 12:43 +0000, Russell King - ARM Linux wrote:
> On Fri, Nov 12, 2010 at 06:00:21PM +0000, Catalin Marinas wrote:
> > diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
> > index 8c19595..40b386c 100644
> > --- a/arch/arm/kernel/smp.c
> > +++ b/arch/arm/kernel/smp.c
> > @@ -78,7 +78,7 @@ static inline void identity_mapping_add(pgd_t *pgd, unsigned long start,
> >       if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
> >               prot |= PMD_BIT4;
> > 
> > -     for (addr = start & PGDIR_MASK; addr < end;) {
> > +     for (addr = start & PMD_MASK; addr < end;) {
> >               pmd = pmd_offset(pgd + pgd_index(addr), addr);
> >               pmd[0] = __pmd(addr | prot);
> >               addr += SECTION_SIZE;
> > @@ -95,7 +95,7 @@ static inline void identity_mapping_del(pgd_t *pgd, unsigned long start,
> >       unsigned long addr;
> >       pmd_t *pmd;
> > 
> > -     for (addr = start & PGDIR_MASK; addr < end; addr += PGDIR_SIZE) {
> > +     for (addr = start & PMD_MASK; addr < end; addr += PMD_SIZE) {
> >               pmd = pmd_offset(pgd + pgd_index(addr), addr);
> >               pmd[0] = __pmd(0);
> >               pmd[1] = __pmd(0);
> ...
> > @@ -1068,12 +1068,12 @@ void setup_mm_for_reboot(char mode)
> >               base_pmdval |= PMD_BIT4;
> > 
> >       for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
> > -             unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
> > +             unsigned long pmdval = (i << PMD_SHIFT) | base_pmdval;
> >               pmd_t *pmd;
> > 
> > -             pmd = pmd_off(pgd, i << PGDIR_SHIFT);
> > +             pmd = pmd_off(pgd, i << PMD_SHIFT);
> >               pmd[0] = __pmd(pmdval);
> > -             pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
> > +             pmd[1] = __pmd(pmdval + (1 << (PMD_SHIFT - 1)));
> >               flush_pmd_entry(pmd);
> >       }
> > 
> 
> This lot really does need unifying - and in any case this last addition
> should be using 'SECTION SIZE' not something related to PMD shifts.

On the classic page tables, the PMD_SHIFT is 21 while the SECTION_SHIFT
is 20. They have slightly different meaning.

But we currently have some hacks to cope with PMD_SHIFT being 21 by
writing the pmd[0] and pmd[1] in the same call. The way I see to use
SECTION_SHIFT is to drop the pmd[] array (but haven't looked closely
enough). With LPAE I have a few #ifndef around pmd[1] setting.

> Strangely, it's something I've done over the weekend...

OK, the more clean-up the better.

-- 
Catalin