[PATCH 1/7] i2c/pxa2xx: Don't touch ISAR if not in slave mode

[bigeasy@linutronix.de (Sebastian Andrzej Siewior)]

The reset functions sets writes the slave address even in not slave
mode. I don't see any reason in writting it if slave mode is not
enabled.
I have here a PXA-I2C variant where this register is not availbale and
as such can not be touched.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
---
 drivers/i2c/busses/i2c-pxa.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index f4c19a9..579c8a8 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -418,7 +418,9 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
 	writel(I2C_ISR_INIT, _ISR(i2c));
 	writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c));
 
+#ifdef CONFIG_I2C_PXA_SLAVE
 	writel(i2c->slave_addr, _ISAR(i2c));
+#endif
 
 	/* set control register values */
 	writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
-- 
1.7.3.2