linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: charu@ti.com (Varadarajan, Charulatha)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 07/11] OMAP3: hwmod data: Add GPIO
Date: Thu, 25 Nov 2010 18:18:34 +0530	[thread overview]
Message-ID: <1290689318-10191-8-git-send-email-charu@ti.com> (raw)
In-Reply-To: <1290689318-10191-1-git-send-email-charu@ti.com>

Add GPIO hwmod data for OMAP3

Also remove "omap34xx.h" header file as it is not required
anymore.

Signed-off-by: Charulatha V <charu@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Benoit Cousson <b-cousson@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |  361 +++++++++++++++++++++++++++-
 1 files changed, 360 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index a8bed84..5cb2aff 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -20,7 +20,7 @@
 #include <plat/serial.h>
 #include <plat/l4_3xxx.h>
 #include <plat/i2c.h>
-#include <plat/omap34xx.h>
+#include <plat/gpio.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -45,6 +45,12 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod;
 static struct omap_hwmod omap3xxx_i2c1_hwmod;
 static struct omap_hwmod omap3xxx_i2c2_hwmod;
 static struct omap_hwmod omap3xxx_i2c3_hwmod;
+static struct omap_hwmod omap3xxx_gpio1_hwmod;
+static struct omap_hwmod omap3xxx_gpio2_hwmod;
+static struct omap_hwmod omap3xxx_gpio3_hwmod;
+static struct omap_hwmod omap3xxx_gpio4_hwmod;
+static struct omap_hwmod omap3xxx_gpio5_hwmod;
+static struct omap_hwmod omap3xxx_gpio6_hwmod;
 
 /* L3 -> L4_CORE interface */
 static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
@@ -739,6 +745,351 @@ static struct omap_hwmod omap3xxx_i2c3_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = {
+	{
+		.pa_start	= 0x48310000,
+		.pa_end		= 0x483101ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
+	.master		= &omap3xxx_l4_wkup_hwmod,
+	.slave		= &omap3xxx_gpio1_hwmod,
+	.addr		= omap3xxx_gpio1_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio1_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio2 */
+static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = {
+	{
+		.pa_start	= 0x49050000,
+		.pa_end		= 0x490501ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio2_hwmod,
+	.addr		= omap3xxx_gpio2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio3 */
+static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = {
+	{
+		.pa_start	= 0x49052000,
+		.pa_end		= 0x490521ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio3_hwmod,
+	.addr		= omap3xxx_gpio3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio3_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio4 */
+static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
+	{
+		.pa_start	= 0x49054000,
+		.pa_end		= 0x490541ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio4_hwmod,
+	.addr		= omap3xxx_gpio4_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio4_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio5 */
+static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = {
+	{
+		.pa_start	= 0x49056000,
+		.pa_end		= 0x490561ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio5_hwmod,
+	.addr		= omap3xxx_gpio5_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio5_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio6 */
+static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = {
+	{
+		.pa_start	= 0x49058000,
+		.pa_end		= 0x490581ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio6_hwmod,
+	.addr		= omap3xxx_gpio6_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio6_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+
+static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = {
+	.name = "gpio",
+	.sysc = &omap3xxx_gpio_sysc,
+	.rev = 1,
+};
+
+/* gpio_dev_attr*/
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width = 32,
+	.dbck_flag = true,
+};
+
+/* gpio1 */
+static struct omap_hwmod_irq_info omap3xxx_gpio1_irqs[] = {
+	{ .irq = 29 }, /* INT_34XX_GPIO_BANK1 */
+};
+
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio1_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
+	&omap3xxx_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap3xxx_gpio1_hwmod = {
+	.name		= "gpio1",
+	.mpu_irqs	= omap3xxx_gpio1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio1_irqs),
+	.main_clk	= "gpio1_ick",
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO1_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio1_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio2 */
+static struct omap_hwmod_irq_info omap3xxx_gpio2_irqs[] = {
+	{ .irq = 30 }, /* INT_34XX_GPIO_BANK2 */
+};
+
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio2_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
+	&omap3xxx_l4_per__gpio2,
+};
+
+static struct omap_hwmod omap3xxx_gpio2_hwmod = {
+	.name		= "gpio2",
+	.mpu_irqs	= omap3xxx_gpio2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio2_irqs),
+	.main_clk	= "gpio2_ick",
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO2_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio2_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio3 */
+static struct omap_hwmod_irq_info omap3xxx_gpio3_irqs[] = {
+	{ .irq = 31 }, /* INT_34XX_GPIO_BANK3 */
+};
+
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio3_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
+	&omap3xxx_l4_per__gpio3,
+};
+
+static struct omap_hwmod omap3xxx_gpio3_hwmod = {
+	.name		= "gpio3",
+	.mpu_irqs	= omap3xxx_gpio3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio3_irqs),
+	.main_clk	= "gpio3_ick",
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO3_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio3_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio4 */
+static struct omap_hwmod_irq_info omap3xxx_gpio4_irqs[] = {
+	{ .irq = 32 }, /* INT_34XX_GPIO_BANK4 */
+};
+
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio4_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
+	&omap3xxx_l4_per__gpio4,
+};
+
+static struct omap_hwmod omap3xxx_gpio4_hwmod = {
+	.name		= "gpio4",
+	.mpu_irqs	= omap3xxx_gpio4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio4_irqs),
+	.main_clk	= "gpio4_ick",
+	.opt_clks	= gpio4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO4_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio4_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio5 */
+static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
+	{ .irq = 33 }, /* INT_34XX_GPIO_BANK5 */
+};
+
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio5_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
+	&omap3xxx_l4_per__gpio5,
+};
+
+static struct omap_hwmod omap3xxx_gpio5_hwmod = {
+	.name		= "gpio5",
+	.mpu_irqs	= omap3xxx_gpio5_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio5_irqs),
+	.main_clk	= "gpio5_ick",
+	.opt_clks	= gpio5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO5_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio5_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio5_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio6 */
+static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
+	{ .irq = 34 }, /* INT_34XX_GPIO_BANK6 */
+};
+
+static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio6_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
+	&omap3xxx_l4_per__gpio6,
+};
+
+static struct omap_hwmod omap3xxx_gpio6_hwmod = {
+	.name		= "gpio6",
+	.mpu_irqs	= omap3xxx_gpio6_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio6_irqs),
+	.main_clk	= "gpio6_ick",
+	.opt_clks	= gpio6_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO6_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio6_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio6_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
 static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_l3_main_hwmod,
 	&omap3xxx_l4_core_hwmod,
@@ -754,6 +1105,14 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_i2c1_hwmod,
 	&omap3xxx_i2c2_hwmod,
 	&omap3xxx_i2c3_hwmod,
+
+	/* gpio class */
+	&omap3xxx_gpio1_hwmod,
+	&omap3xxx_gpio2_hwmod,
+	&omap3xxx_gpio3_hwmod,
+	&omap3xxx_gpio4_hwmod,
+	&omap3xxx_gpio5_hwmod,
+	&omap3xxx_gpio6_hwmod,
 	NULL,
 };
 
-- 
1.7.0.4

  parent reply	other threads:[~2010-11-25 12:48 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-25 12:48 [PATCH v8 00/11] OMAP: GPIO: Implement GPIO as platform device Varadarajan, Charulatha
2010-11-25 12:48 ` [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver Varadarajan, Charulatha
2010-12-01 18:34   ` [PATCH v8 01-b/11] OMAP: GPIO: Make omap_gpio_show_rev bank specific Tony Lindgren
2010-12-09 19:18   ` [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver Kevin Hilman
2010-12-09 21:33     ` Cousson, Benoit
2010-12-09 22:19       ` Kevin Hilman
2010-12-09 22:29         ` Cousson, Benoit
2010-12-09 23:19     ` Kevin Hilman
2010-11-25 12:48 ` [PATCH v8 02/11] OMAP15xx: GPIO: Introduce support for GPIO init Varadarajan, Charulatha
2010-11-25 12:48 ` [PATCH v8 03/11] OMAP16xx: " Varadarajan, Charulatha
2010-11-25 12:48 ` [PATCH v8 04/11] OMAP7xx: " Varadarajan, Charulatha
2010-12-07  5:20   ` Cory Maccarrone
2010-12-07  5:43     ` Varadarajan, Charulatha
2010-11-25 12:48 ` [PATCH v8 05/11] OMAP2420: hwmod data: Add GPIO Varadarajan, Charulatha
2010-11-25 12:48 ` [PATCH v8 06/11] OMAP2430: " Varadarajan, Charulatha
2010-11-25 12:48 ` Varadarajan, Charulatha [this message]
2010-11-25 12:48 ` [PATCH v8 08/11] OMAP4: " Varadarajan, Charulatha
2010-11-25 12:48 ` [PATCH v8 09/11] OMAP2+: GPIO: device registration Varadarajan, Charulatha
2010-11-25 12:48 ` [PATCH v8 10/11] OMAP: GPIO: Implement GPIO as a platform device Varadarajan, Charulatha
2010-12-07  5:19   ` Cory Maccarrone
2010-12-07  5:35     ` Varadarajan, Charulatha
2010-12-07  7:08       ` Varadarajan, Charulatha
2010-12-07 22:07         ` Tony Lindgren
2010-11-25 12:48 ` [PATCH v8 11/11] OMAP: GPIO: Remove omap_gpio_init() Varadarajan, Charulatha
2010-12-01 18:33 ` [PATCH v8 00/11] OMAP: GPIO: Implement GPIO as platform device Tony Lindgren
2010-12-02  9:58   ` Kevin Hilman
2010-12-02 14:18     ` Varadarajan, Charulatha
2010-12-04 21:25       ` Tony Lindgren
2010-12-07 23:23         ` [PATCH 12/11] omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx Tony Lindgren
2010-12-08  1:04           ` Tony Lindgren
2010-12-08  4:22           ` Varadarajan, Charulatha
2010-12-10 16:04           ` Janusz Krzysztofik
2010-12-10 17:41             ` Tony Lindgren
2010-12-08  0:54 ` [PATCH v8 00/11] OMAP: GPIO: Implement GPIO as platform device Tony Lindgren
2010-12-09 19:33 ` [PATCH 13/11] OMAP2+: GPIO: ensure bank wakeups are enabled by default Kevin Hilman
2010-12-10  0:07   ` Tony Lindgren
2010-12-10  0:14     ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1290689318-10191-8-git-send-email-charu@ti.com \
    --to=charu@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).