linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: broonie@opensource.wolfsonmicro.com (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods
Date: Thu, 25 Nov 2010 15:18:27 +0000	[thread overview]
Message-ID: <1290698309-7691-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)

Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Begin converting Samsung platforms over to
these methods by converting s3c_irqext_wake() with a simple textual
substitution.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c64xx/irq-eint.c        |    2 +-
 arch/arm/mach-s5pv310/irq-eint.c        |    2 +-
 arch/arm/plat-s3c24xx/irq.c             |    2 +-
 arch/arm/plat-s5p/irq-eint.c            |    4 ++--
 arch/arm/plat-samsung/include/plat/pm.h |    4 +++-
 arch/arm/plat-samsung/pm.c              |    6 +++---
 6 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
index 5682d6a..1a1aa5d 100644
--- a/arch/arm/mach-s3c64xx/irq-eint.c
+++ b/arch/arm/mach-s3c64xx/irq-eint.c
@@ -145,7 +145,7 @@ static struct irq_chip s3c_irq_eint = {
 	.mask_ack	= s3c_irq_eint_maskack,
 	.ack		= s3c_irq_eint_ack,
 	.set_type	= s3c_irq_eint_set_type,
-	.set_wake	= s3c_irqext_wake,
+	.irq_set_wake	= s3c_irqext_wake,
 };
 
 /* s3c_irq_demux_eint
diff --git a/arch/arm/mach-s5pv310/irq-eint.c b/arch/arm/mach-s5pv310/irq-eint.c
index 5877503..f5a415e 100644
--- a/arch/arm/mach-s5pv310/irq-eint.c
+++ b/arch/arm/mach-s5pv310/irq-eint.c
@@ -152,7 +152,7 @@ static struct irq_chip s5pv310_irq_eint = {
 	.ack		= s5pv310_irq_eint_ack,
 	.set_type	= s5pv310_irq_eint_set_type,
 #ifdef CONFIG_PM
-	.set_wake	= s3c_irqext_wake,
+	.irq_set_wake	= s3c_irqext_wake,
 #endif
 };
 
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index ad0d44e..91ce383 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -238,7 +238,7 @@ static struct irq_chip s3c_irqext_chip = {
 	.unmask		= s3c_irqext_unmask,
 	.ack		= s3c_irqext_ack,
 	.set_type	= s3c_irqext_type,
-	.set_wake	= s3c_irqext_wake
+	.irq_set_wake	= s3c_irqext_wake
 };
 
 static struct irq_chip s3c_irq_eint0t4 = {
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index 752f1a6..f2f2e1c 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -125,7 +125,7 @@ static struct irq_chip s5p_irq_eint = {
 	.ack		= s5p_irq_eint_ack,
 	.set_type	= s5p_irq_eint_set_type,
 #ifdef CONFIG_PM
-	.set_wake	= s3c_irqext_wake,
+	.irq_set_wake	= s3c_irqext_wake,
 #endif
 };
 
@@ -194,7 +194,7 @@ static struct irq_chip s5p_irq_vic_eint = {
 	.ack		= s5p_irq_vic_eint_ack,
 	.set_type	= s5p_irq_eint_set_type,
 #ifdef CONFIG_PM
-	.set_wake	= s3c_irqext_wake,
+	.irq_set_wake	= s3c_irqext_wake,
 #endif
 };
 
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 245836d..d9025e3 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -15,6 +15,8 @@
  * management
 */
 
+#include <linux/irq.h>
+
 #ifdef CONFIG_PM
 
 extern __init int s3c_pm_init(void);
@@ -100,7 +102,7 @@ extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
 extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
 
 #ifdef CONFIG_PM
-extern int s3c_irqext_wake(unsigned int irqno, unsigned int state);
+extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
 extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
 extern int s3c24xx_irq_resume(struct sys_device *dev);
 #else
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 5bf3f2f..02d531f 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -136,15 +136,15 @@ static void s3c_pm_restore_uarts(void) { }
 unsigned long s3c_irqwake_intmask	= 0xffffffffL;
 unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
 
-int s3c_irqext_wake(unsigned int irqno, unsigned int state)
+int s3c_irqext_wake(struct irq_data *data, unsigned int state)
 {
-	unsigned long bit = 1L << IRQ_EINT_BIT(irqno);
+	unsigned long bit = 1L << IRQ_EINT_BIT(data->irq);
 
 	if (!(s3c_irqwake_eintallow & bit))
 		return -ENOENT;
 
 	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
+	       state ? "enabled" : "disabled", data->irq);
 
 	if (!state)
 		s3c_irqwake_eintmask |= bit;
-- 
1.7.1

             reply	other threads:[~2010-11-25 15:18 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-25 15:18 Mark Brown [this message]
2010-11-25 15:18 ` [PATCH 2/3] ARM: S3C64XX: Convert S3C64xx irq-eint to use new irq_ methods Mark Brown
2010-12-01 11:30   ` Kukjin Kim
2010-11-25 15:18 ` [PATCH 3/3] ARM: S3C64XX: Use chip_data to store the shift for EINTs Mark Brown
2010-12-01 11:44   ` Kukjin Kim
2010-12-01 11:55     ` Mark Brown
2010-12-01 12:11       ` Kukjin Kim
2010-12-08  0:36       ` Ben Dooks
2010-12-01 10:19 ` [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods Lennert Buytenhek
2010-12-01 11:08   ` Mark Brown
2010-12-01 11:45     ` Lennert Buytenhek
2010-12-01 11:47       ` Mark Brown
2010-12-01 11:24 ` Kukjin Kim
2010-12-01 11:28 ` Kukjin Kim
2010-12-01 11:33   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1290698309-7691-1-git-send-email-broonie@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).