From: fabio.estevam@freescale.com (Fabio Estevam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 2/2] ARM: mx5: dynamically allocate imx-keypad devices
Date: Wed, 1 Dec 2010 11:11:47 -0200 [thread overview]
Message-ID: <1291209107-2256-2-git-send-email-fabio.estevam@freescale.com> (raw)
In-Reply-To: <1291209107-2256-1-git-send-email-fabio.estevam@freescale.com>
Add support for dynamical allocation of imx-keypad on mx5 platform.
After moving to dynamically registration of the keypad, the keypad clock
name needs to change accordingly.
The reason is that the original mx5 keypad platform_device id was 0,
now we use id=-1 as per arch/arm/plat-mxc/devices/platform-imx-keypad.c.
Tested keypad successfully on a MX51_3DS board.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/mach-mx5/Kconfig | 2 ++
arch/arm/mach-mx5/board-mx51_3ds.c | 5 ++---
arch/arm/mach-mx5/clock-mx51-mx53.c | 2 +-
arch/arm/mach-mx5/devices-imx51.h | 4 ++++
arch/arm/mach-mx5/devices.c | 19 -------------------
arch/arm/mach-mx5/devices.h | 1 -
arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 5 ++---
arch/arm/plat-mxc/devices/platform-imx-keypad.c | 5 +++++
arch/arm/plat-mxc/include/mach/mx51.h | 2 +-
9 files changed, 17 insertions(+), 28 deletions(-)
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 7f5a696..0f61f03 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -29,6 +29,7 @@ config MACH_MX51_BABBAGE
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
select SOC_IMX51
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
@@ -56,6 +57,7 @@ choice
config MACH_EUKREA_MBIMX51_BASEBOARD
prompt "Eukrea MBIMX51 development board"
bool
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
This adds board specific devices that can be found on Eukrea's
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 6cc2805..43cd5ab 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -12,7 +12,6 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
-#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
@@ -120,14 +119,14 @@ static int mx51_3ds_board_keymap[] = {
KEY(3, 5, KEY_BACK)
};
-static struct matrix_keymap_data mx51_3ds_map_data = {
+static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
.keymap = mx51_3ds_board_keymap,
.keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap),
};
static void mxc_init_keypad(void)
{
- mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data);
+ imx51_add_imx_keypad(&mx51_3ds_map_data);
}
#else
static inline void mxc_init_keypad(void)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 344ee8e..57fea05 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1091,7 +1091,7 @@ static struct clk_lookup mx51_lookups[] = {
_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
- _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
+ _REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index e4bc426..b98b4d3 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -51,3 +51,7 @@ extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data __initconst;
extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst;
#define imx51_add_mxc_pwm(id, pdata) \
imx_add_mxc_pwm(&imx51_mxc_pwm_data[id], pdata)
+
+extern const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst;
+#define imx51_add_imx_keypad(pdata) \
+ imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index ac55f7f..d733a97 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -97,25 +97,6 @@ struct platform_device mxc_usbh1_device = {
},
};
-static struct resource mxc_kpp_resources[] = {
- {
- .start = MX51_MXC_INT_KPP,
- .end = MX51_MXC_INT_KPP,
- .flags = IORESOURCE_IRQ,
- } , {
- .start = MX51_KPP_BASE_ADDR,
- .end = MX51_KPP_BASE_ADDR + 0x8 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mxc_keypad_device = {
- .name = "imx-keypad",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_kpp_resources),
- .resource = mxc_kpp_resources,
-};
-
static struct mxc_gpio_port mxc_gpio_ports[] = {
{
.chip.label = "gpio-0",
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index ccb7cdc..0905843 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -2,4 +2,3 @@ extern struct platform_device mxc_usbdr_host_device;
extern struct platform_device mxc_usbh1_device;
extern struct platform_device mxc_usbdr_udc_device;
extern struct platform_device mxc_hsi2c_device;
-extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index 94c293f..e86ade4 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -21,7 +21,6 @@
#include <linux/fsl_devices.h>
#include <linux/i2c/tsc2007.h>
#include <linux/leds.h>
-#include <linux/input/matrix_keypad.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -157,7 +156,7 @@ static int mbimx51_keymap[] = {
KEY(3, 3, KEY_ENTER),
};
-static struct matrix_keymap_data mbimx51_map_data = {
+static const struct matrix_keymap_data mbimx51_map_data __initconst = {
.keymap = mbimx51_keymap,
.keymap_size = ARRAY_SIZE(mbimx51_keymap),
};
@@ -209,7 +208,7 @@ void __init eukrea_mbimx51_baseboard_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_keypad_device, &mbimx51_map_data);
+ imx51_add_imx_keypad(&mbimx51_map_data);
gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
gpio_direction_input(MBIMX51_TSC2007_GPIO);
diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/plat-mxc/devices/platform-imx-keypad.c
index 40238f0..2636611 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-keypad.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-keypad.c
@@ -41,6 +41,11 @@ const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX35, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX35 */
+#ifdef CONFIG_SOC_IMX51
+const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst =
+ imx_imx_keypad_data_entry_single(MX51, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata)
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 54b58a0..808a626 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -301,7 +301,7 @@
#define MX51_MXC_INT_GPIO4_HIGH 57
#define MX51_MXC_INT_WDOG1 58
#define MX51_MXC_INT_WDOG2 59
-#define MX51_MXC_INT_KPP 60
+#define MX51_INT_KPP 60
#define MX51_INT_PWM1 61
#define MX51_INT_I2C1 62
#define MX51_INT_I2C2 63
--
1.6.0.4
next prev parent reply other threads:[~2010-12-01 13:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-01 13:11 [PATCH v6 1/2] ARM: mx5: dynamically allocate pwm devices Fabio Estevam
2010-12-01 13:11 ` Fabio Estevam [this message]
2010-12-07 19:20 ` Fabio Estevam
2011-01-04 17:26 ` Fabio Estevam
2011-01-04 21:05 ` Uwe Kleine-König
2011-01-11 15:38 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291209107-2256-2-git-send-email-fabio.estevam@freescale.com \
--to=fabio.estevam@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).