From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 0/4] ARM: Fixing udelay() for SMP and non-SMP systems
Date: Tue, 7 Dec 2010 20:38:44 -0800 [thread overview]
Message-ID: <1291783128-27520-1-git-send-email-sboyd@codeaurora.org> (raw)
These patches fixing the udelay() issue pointed out on
arm-lkml[1][2]. A quick recap: some SMP machines can scale
their CPU frequencies independent of one another. loops_per_jiffy
is calibrated globally and used in __const_udelay(). If one CPU
is running faster than what the loops_per_jiffy is calculated
(or scaled) for, udelay() will be incorrect and not wait long
enough (or too long). A similar problem occurs if the cpu
frequency is scaled during a udelay() call.
We could fix this issue a couple ways, wholesale replacement
of __udelay() and __const_udelay() (see [2] for that approach),
or replacement of __delay() (this series). Option 1 can fail if
anybody uses udelay() before memory is mapped and also duplicates
most of the code in asm/delay.h. It also needs to hardcode the
timer tick frequency, which can sometimes be inaccurate. The
benefit is that loops_per_jiffy stays the same and thus BogoMIPS
is unchanged. Option 2 can't fail since the __delay() loop is
replaced after memory is mapped in, but it suffers from a low
BogoMIPS when timers are clocked slowly. It also more accurately
calculates the timer tick frequency through the use of
calibrate_delay_direct().
Russell, I'm planning on submitting these to the patch queue
unless I hear objections.
Changes since v2:
* Additional patch using the timer based delay
Changes since v1:
* likely() in delay.c
* comment fixup for read_current_timer_delay_loop()
* cosmetic improvements to commit text
Stephen Boyd (4):
ARM: Translate delay.S into (mostly) C
ARM: Allow machines to override __delay()
ARM: Implement a timer based __delay() loop
msm: timer: Migrate to timer based __delay()
arch/arm/include/asm/delay.h | 5 ++-
arch/arm/kernel/armksyms.c | 4 --
arch/arm/lib/delay.S | 65 ------------------------
arch/arm/lib/delay.c | 86 ++++++++++++++++++++++++++++++++
arch/arm/mach-msm/include/mach/timex.h | 1 +
arch/arm/mach-msm/timer.c | 16 ++++++-
6 files changed, 106 insertions(+), 71 deletions(-)
delete mode 100644 arch/arm/lib/delay.S
create mode 100644 arch/arm/lib/delay.c
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next reply other threads:[~2010-12-08 4:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-08 4:38 Stephen Boyd [this message]
2010-12-08 4:38 ` [PATCHv3 1/4] ARM: Translate delay.S into (mostly) C Stephen Boyd
2010-12-08 4:38 ` [PATCHv3 2/4] ARM: Allow machines to override __delay() Stephen Boyd
2010-12-08 19:22 ` Daniel Walker
2010-12-08 20:24 ` Stephen Boyd
2010-12-08 20:26 ` Daniel Walker
2010-12-08 20:30 ` Stephen Boyd
2010-12-08 21:07 ` Daniel Walker
2010-12-08 4:38 ` [PATCHv3 3/4] ARM: Implement a timer based __delay() loop Stephen Boyd
2010-12-08 4:38 ` [PATCHv3 4/4] msm: timer: Migrate to timer based __delay() Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291783128-27520-1-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).