From: jean.pihet@newoldbits.com (jean.pihet at newoldbits.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] OMAP2+: disable idle early in the suspend sequence
Date: Thu, 9 Dec 2010 21:02:56 +0100 [thread overview]
Message-ID: <1291924976-19280-1-git-send-email-jean.pihet@newoldbits.com> (raw)
From: Jean Pihet <j-pihet@ti.com>
Some bad interaction between the idle and the suspend paths has been
identified: the idle code is called during the suspend enter and exit
sequences. This could cause corruption or lock-up of resources.
The solution is to move the calls to disable_hlt at the very beginning
of the suspend sequence (ex. in omap3_pm_begin instead of
omap3_pm_prepare), and the call to enable_hlt at the very end of
the suspend sequence (ex. in omap3_pm_end instead of omap3_pm_finish).
Tested with RET and OFF on Beagle and OMAP3EVM.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
---
v1:
Support for OMAP3 only.
Tested on board.
v2:
Added support for OMAP2 and OMAP4.
Compile tested only for OMAP2 and OMAP4.
Tested on board for OMAP3.
v3:
Rebased on Kevin's latest 'OMAP2+: PM/serial: fix console semaphore acquire during suspend', cf. http://marc.info/?l=linux-omap&m=129184804805075&w=2
Removed the empty _pm_prepare and _pm_finish functions.
arch/arm/mach-omap2/pm24xx.c | 16 ++--------------
arch/arm/mach-omap2/pm34xx.c | 15 ++-------------
arch/arm/mach-omap2/pm44xx.c | 16 ++--------------
3 files changed, 6 insertions(+), 41 deletions(-)
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 1e031d0..6cde8ed 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -301,14 +301,8 @@ out:
static int omap2_pm_begin(suspend_state_t state)
{
- suspend_state = state;
- return 0;
-}
-
-static int omap2_pm_prepare(void)
-{
- /* We cannot sleep in idle until we have resumed */
disable_hlt();
+ suspend_state = state;
return 0;
}
@@ -349,22 +343,16 @@ static int omap2_pm_enter(suspend_state_t state)
return ret;
}
-static void omap2_pm_finish(void)
-{
- enable_hlt();
-}
-
static void omap2_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
+ enable_hlt();
return;
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap2_pm_begin,
- .prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
- .finish = omap2_pm_finish,
.end = omap2_pm_end,
.valid = suspend_valid_only_mem,
};
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 648b8c5..5bf344a 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -529,12 +529,6 @@ out:
}
#ifdef CONFIG_SUSPEND
-static int omap3_pm_prepare(void)
-{
- disable_hlt();
- return 0;
-}
-
static int omap3_pm_suspend(void)
{
struct power_state *pwrst;
@@ -597,14 +591,10 @@ static int omap3_pm_enter(suspend_state_t unused)
return ret;
}
-static void omap3_pm_finish(void)
-{
- enable_hlt();
-}
-
/* Hooks to enable / disable UART interrupts during suspend */
static int omap3_pm_begin(suspend_state_t state)
{
+ disable_hlt();
suspend_state = state;
omap_uart_enable_irqs(0);
return 0;
@@ -614,15 +604,14 @@ static void omap3_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
omap_uart_enable_irqs(1);
+ enable_hlt();
return;
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap3_pm_begin,
.end = omap3_pm_end,
- .prepare = omap3_pm_prepare,
.enter = omap3_pm_enter,
- .finish = omap3_pm_finish,
.valid = suspend_valid_only_mem,
};
#endif /* CONFIG_SUSPEND */
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 54544b4..6aff996 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -31,12 +31,6 @@ struct power_state {
static LIST_HEAD(pwrst_list);
#ifdef CONFIG_SUSPEND
-static int omap4_pm_prepare(void)
-{
- disable_hlt();
- return 0;
-}
-
static int omap4_pm_suspend(void)
{
do_wfi();
@@ -59,28 +53,22 @@ static int omap4_pm_enter(suspend_state_t suspend_state)
return ret;
}
-static void omap4_pm_finish(void)
-{
- enable_hlt();
- return;
-}
-
static int omap4_pm_begin(suspend_state_t state)
{
+ disable_hlt();
return 0;
}
static void omap4_pm_end(void)
{
+ enable_hlt();
return;
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap4_pm_begin,
.end = omap4_pm_end,
- .prepare = omap4_pm_prepare,
.enter = omap4_pm_enter,
- .finish = omap4_pm_finish,
.valid = suspend_valid_only_mem,
};
#endif /* CONFIG_SUSPEND */
--
1.7.1
reply other threads:[~2010-12-09 20:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291924976-19280-1-git-send-email-jean.pihet@newoldbits.com \
--to=jean.pihet@newoldbits.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).