From: johlstei@codeaurora.org (Jeff Ohlstein)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 4/5] msm: hotplug: support cpu hotplug on msm
Date: Fri, 17 Dec 2010 00:28:47 -0800 [thread overview]
Message-ID: <1292574528-13310-5-git-send-email-johlstei@codeaurora.org> (raw)
In-Reply-To: <1292574528-13310-1-git-send-email-johlstei@codeaurora.org>
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
---
arch/arm/mach-msm/Makefile | 2 +
arch/arm/mach-msm/hotplug.c | 91 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 93 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-msm/hotplug.c
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 34cd0a8..7a11b4a 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -20,6 +20,8 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
new file mode 100644
index 0000000..5a31f70
--- /dev/null
+++ b/arch/arm/mach-msm/hotplug.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+
+extern volatile int pen_release;
+
+static inline void cpu_enter_lowpower(void)
+{
+ /* Just flush the cache. Changing the coherency is not yet
+ * available on msm. */
+ flush_cache_all();
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+}
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+ /* Just enter wfi for now. TODO: Properly shut off the cpu. */
+ for (;;) {
+ /*
+ * here's the WFI
+ */
+ asm("wfi"
+ :
+ :
+ : "memory", "cc");
+
+ if (pen_release == cpu) {
+ /*
+ * OK, proper wakeup, we're done
+ */
+ break;
+ }
+
+ /*
+ * getting here, means that we have come out of WFI without
+ * having been woken up - this shouldn't happen
+ *
+ * The trouble is, letting people know about this is not really
+ * possible, since we are currently running incoherently, and
+ * therefore cannot safely call printk() or anything else
+ */
+ pr_debug("CPU%u: spurious wakeup call\n", cpu);
+ }
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+ /*
+ * we're ready for shutdown now, so do it
+ */
+ cpu_enter_lowpower();
+ platform_do_lowpower(cpu);
+
+ /*
+ * bring this CPU back into the world of cache
+ * coherency, and then restore interrupts
+ */
+ cpu_leave_lowpower();
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * we don't allow CPU 0 to be shutdown (it is still too special
+ * e.g. clock tick interrupts)
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2010-12-17 8:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-17 8:28 [PATCH v6 0/5] SMP support for msm Jeff Ohlstein
2010-12-17 8:28 ` [PATCH v6 1/5] msm: Secure Channel Manager (SCM) support Jeff Ohlstein
2010-12-17 8:28 ` [PATCH v6 2/5] msm: scm-boot: Support for setting cold/warm boot addresses Jeff Ohlstein
2010-12-17 8:28 ` [PATCH v6 3/5] msm: timer: SMP timer support for msm Jeff Ohlstein
2010-12-17 8:28 ` Jeff Ohlstein [this message]
2010-12-17 8:28 ` [PATCH v6 5/5] msm: add SMP " Jeff Ohlstein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292574528-13310-5-git-send-email-johlstei@codeaurora.org \
--to=johlstei@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).