[PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses

[jean.pihet@newoldbits.com (jean.pihet at newoldbits.com)]

From: Jean Pihet <j-pihet@ti.com>

The SRAM PA addresses are locally defined and used at
different places, i.e. SRAM management code and idle sleep code.

The macros are now defined at a centralized place, for
easier maintenance.

Tested on N900 and Beagleboard with full RET and OFF modes,
using cpuidle and suspend.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Nishanth Menon<nm@ti.com>
---
 arch/arm/mach-omap2/sdrc.h             |    1 -
 arch/arm/mach-omap2/sleep34xx.S        |    1 +
 arch/arm/plat-omap/include/plat/sram.h |   11 +++++++++++
 arch/arm/plat-omap/sram.c              |    7 ++-----
 4 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 68f57bb..b3f8379 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -74,5 +74,4 @@ static inline u32 sms_read_reg(u16 reg)
  */
 #define SDRC_MPURATE_LOOPS		96
 
-
 #endif
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 2191576..406cd2a 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -26,6 +26,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <plat/sram.h>
 #include <mach/io.h>
 
 #include "cm.h"
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 5905100..9967d5e 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -11,6 +11,7 @@
 #ifndef __ARCH_ARM_OMAP_SRAM_H
 #define __ARCH_ARM_OMAP_SRAM_H
 
+#ifndef __ASSEMBLY__
 extern void * omap_sram_push(void * start, unsigned long size);
 extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
 
@@ -74,4 +75,14 @@ extern void omap_push_sram_idle(void);
 static inline void omap_push_sram_idle(void) {}
 #endif /* CONFIG_PM */
 
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA		0x40200000
+#define OMAP3_SRAM_PA           0x40200000
+#define OMAP4_SRAM_PA		0x40300000
+
 #endif
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 819ea0c..1a686c8 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -41,15 +41,12 @@
 
 #define OMAP1_SRAM_PA		0x20000000
 #define OMAP1_SRAM_VA		VMALLOC_END
-#define OMAP2_SRAM_PA		0x40200000
-#define OMAP2_SRAM_PUB_PA	0x4020f800
+#define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
 #define OMAP2_SRAM_VA		0xfe400000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_PA           0x40200000
 #define OMAP3_SRAM_VA           0xfe400000
-#define OMAP3_SRAM_PUB_PA       0x40208000
+#define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
 #define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_PA		0x40300000
 #define OMAP4_SRAM_VA		0xfe400000
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
-- 
1.7.2.3