From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] i.MX51 Framebuffer support
Date: Mon, 20 Dec 2010 11:48:38 +0100 [thread overview]
Message-ID: <1292842127-21406-1-git-send-email-s.hauer@pengutronix.de> (raw)
The following series adds i.MX51 framebuffer support based on the IPUv3. It
is not perfect but I decided it is good enough to open it for a wider audience
and collect first reviews. I tested this on a babbage board using both outputs
(VGA/DVI) with different resolutions up to 1680x1050 and different colour depths.
I also tested it on one custom board using a fixed display setting.
Changes since v1:
- added full overlay support for i.MX51
- more data structures protection
- IPU clock now gets disabled when unused
- many minor cleanups due to comments received from the first round.
The following changes since commit 28a4f908acb342350b9ecbfcdf0a999cb83e05aa:
ARM: mx5: check for error in ioremap (2010-12-14 09:55:53 +0100)
are available in the git repository at:
git://git.pengutronix.de/git/imx/linux-2.6.git ipuv3
Sascha Hauer (9):
ARM i.MX51: Add ipu clock support
ARM i.MX51: rename IPU irqs
Add a mfd IPUv3 driver
fb: export fb mode db table
Add i.MX5 framebuffer driver
ARM i.MX51: Add IPU device support
ARM i.MX5: Allow to increase max zone order
ARM i.MX5: increase dma consistent size for IPU support
ARM i.MX51 babbage: Add framebuffer support
arch/arm/Kconfig | 4 +-
arch/arm/mach-mx5/Kconfig | 1 +
arch/arm/mach-mx5/board-mx51_babbage.c | 74 ++
arch/arm/mach-mx5/clock-mx51-mx53.c | 140 ++++
arch/arm/mach-mx5/devices-imx51.h | 4 +
arch/arm/plat-mxc/devices/Kconfig | 4 +
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-imx_ipuv3.c | 47 ++
arch/arm/plat-mxc/include/mach/devices-common.h | 10 +
arch/arm/plat-mxc/include/mach/ipu-v3.h | 49 ++
arch/arm/plat-mxc/include/mach/memory.h | 3 +-
arch/arm/plat-mxc/include/mach/mx51.h | 4 +-
drivers/mfd/Kconfig | 7 +
drivers/mfd/Makefile | 1 +
drivers/mfd/imx-ipu-v3/Makefile | 3 +
drivers/mfd/imx-ipu-v3/ipu-common.c | 708 +++++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-cpmem.c | 612 +++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-dc.c | 364 +++++++++
drivers/mfd/imx-ipu-v3/ipu-di.c | 550 +++++++++++++
drivers/mfd/imx-ipu-v3/ipu-dmfc.c | 355 +++++++++
drivers/mfd/imx-ipu-v3/ipu-dp.c | 476 ++++++++++++
drivers/mfd/imx-ipu-v3/ipu-prv.h | 216 ++++++
drivers/video/Kconfig | 11 +
drivers/video/Makefile | 1 +
drivers/video/modedb.c | 7 +-
drivers/video/mx5fb.c | 934 +++++++++++++++++++++++
include/linux/fb.h | 3 +
include/linux/mfd/imx-ipu-v3.h | 219 ++++++
28 files changed, 4802 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/plat-mxc/devices/platform-imx_ipuv3.c
create mode 100644 arch/arm/plat-mxc/include/mach/ipu-v3.h
create mode 100644 drivers/mfd/imx-ipu-v3/Makefile
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-common.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-cpmem.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dc.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-di.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dmfc.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dp.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-prv.h
create mode 100644 drivers/video/mx5fb.c
create mode 100644 include/linux/mfd/imx-ipu-v3.h
next reply other threads:[~2010-12-20 10:48 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-20 10:48 Sascha Hauer [this message]
2010-12-20 10:48 ` [PATCH 1/9] ARM i.MX51: Add ipu clock support Sascha Hauer
2010-12-20 10:48 ` [PATCH 2/9] ARM i.MX51: rename IPU irqs Sascha Hauer
2010-12-20 10:48 ` [PATCH 3/9] Add a mfd IPUv3 driver Sascha Hauer
2011-01-03 15:42 ` Sascha Hauer
2011-01-07 12:08 ` Samuel Ortiz
2011-01-31 8:20 ` Sascha Hauer
2011-02-01 10:51 ` Samuel Ortiz
2011-02-01 10:59 ` Sascha Hauer
2011-02-01 11:44 ` Samuel Ortiz
2011-02-01 11:51 ` Russell King - ARM Linux
2011-02-01 12:07 ` Arnaud Patard (Rtp)
2011-02-01 12:51 ` Sascha Hauer
2011-02-01 16:47 ` Uwe Kleine-König
2011-02-01 14:03 ` Samuel Ortiz
2010-12-20 10:48 ` [PATCH 4/9] fb: export fb mode db table Sascha Hauer
2010-12-20 10:48 ` [PATCH 5/9] Add i.MX5 framebuffer driver Sascha Hauer
2010-12-20 10:48 ` [PATCH 6/9] ARM i.MX51: Add IPU device support Sascha Hauer
2010-12-20 10:48 ` [PATCH 7/9] ARM i.MX5: Allow to increase max zone order Sascha Hauer
2010-12-20 10:48 ` [PATCH 8/9] ARM i.MX5: increase dma consistent size for IPU support Sascha Hauer
2010-12-20 10:48 ` [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support Sascha Hauer
2010-12-20 12:35 ` arden jay
2010-12-22 7:56 ` [PATCH v2] i.MX51 Framebuffer support Arnaud Patard (Rtp)
2010-12-22 10:17 ` Peter Korsgaard
2010-12-23 20:45 ` Arnaud Patard (Rtp)
2011-01-05 13:04 ` Julien Boibessot
2011-01-06 9:42 ` Russell King - ARM Linux
2011-01-14 9:17 ` Julien Boibessot
2011-01-06 10:23 ` Sascha Hauer
2011-01-06 10:32 ` Peter Horton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292842127-21406-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).