[PATCH 1/5] S5PC110: add MIPI-DSI system register definitions.

Kukjin Kim
2010-12-29T00:50:38Z

Inki Dae wrote:
>
Please keep myself in Cc on this. I already noticed that to you before.
I think you should check whether mail loop is suitable or not...

And would be better if you could add #0 patch to understand your patches.

> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> ---
> arch/arm/mach-s5pv210/include/mach/regs-clock.h | 6 +++++-
> 1 files changed, 5 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
b/arch/arm/mach-
> s5pv210/include/mach/regs-clock.h
> index ebaabe0..09680d9 100644
> --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
> +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
> @@ -146,6 +146,7 @@
> #define S5P_OM_STAT S5P_CLKREG(0xE100)
> #define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C)
> #define S5P_DAC_CONTROL S5P_CLKREG(0xE810)
> +#define S5P_MIPI_DPHY_CONTROL S5P_CLKREG(0xE814)
>
> #define S5P_INFORM0 S5P_CLKREG(0xF000)
> #define S5P_INFORM1 S5P_CLKREG(0xF004)
> @@ -196,7 +197,10 @@
> #define S5P_OTHERS_USB_SIG_MASK (1 << 16)
>
> /* MIPI */
> -#define S5P_MIPI_DPHY_EN (3)
> +#define S5P_MIPI_DPHY_EN (3 << 0)
> +
> +/* S5P_MIPI_PHY_CON0 */
> +#define S5P_MIPI_M_RESETN (1 << 1)
>
> /* S5P_DAC_CONTROL */
> #define S5P_DAC_ENABLE (1)
> --

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.