From: shawn.guo@freescale.com (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] net/fec: add dual fec support for i.MX28
Date: Tue, 28 Dec 2010 22:55:45 +0800 [thread overview]
Message-ID: <1293548155-16328-1-git-send-email-shawn.guo@freescale.com> (raw)
This patch series is to add dual fec support for mx28, which is
a mxs-based soc. Some code changes related to the following commits
are also made in this patch set for some reasons.
e6b043d512fa8d9a3801bf5d72bfa3b8fc3b3cc8
netdev/fec.c: add phylib supporting to enable carrier detection (v2)
e3fe8558c7fc182972c3d947d88744482111f304
net/fec: fix pm to survive to suspend/resume
Also I do not understand one line change made in commit below.
commit 6fcc040f02d281c7e9563127358a77ce2bbfe284
net: allow FEC driver to use fixed PHY support
- snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
+ snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id + 1);
Can someone help me understand if it's really needed? The patch
set can work with this change, and I'm just curious.
It's been tested on mx28 evk and mx51 babbage. For mx28, it has
to work against the following patch set, which has not got
merged yet.
[PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28
Thanks for review.
Regards,
Shawn
Shawn Guo (10):
arch/arm/mach-mxs/Makefile | 2 +-
arch/arm/mach-mxs/clock-mx28.c | 7 +-
arch/arm/mach-mxs/devices/platform-fec.c | 2 +-
arch/arm/mach-mxs/include/mach/common.h | 1 +
arch/arm/mach-mxs/include/mach/devices-common.h | 2 +-
arch/arm/mach-mxs/mach-mx28evk.c | 59 ++++++-
arch/arm/mach-mxs/ocotp.c | 52 ++++++
arch/arm/mach-mxs/pm.c | 44 +++++
drivers/net/Kconfig | 7 +-
drivers/net/fec.c | 220 +++++++++++++++++------
drivers/net/fec.h | 5 +-
include/linux/fec.h | 2 +
12 files changed, 335 insertions(+), 68 deletions(-)
[PATCH 01/10] net/fec: fix MMFR_OP type in fec_enet_mdio_write
[PATCH 02/10] net/fec: remove the use of "index" which is legacy
[PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac
[PATCH 04/10] net/fec: improve pm for better suspend/resume
[PATCH 05/10] net/fec: add dual fec support for mx28
[PATCH 06/10] ARM: mx28: update clocks for dual fec support
[PATCH 07/10] ARM: mx28: add the second fec device registration
[PATCH 08/10] ARM: mxs: add ocotp read function
[PATCH 09/10] ARM: mx28: read fec mac address from ocotp
[PATCH 10/10] ARM: mxs: add initial pm support
next reply other threads:[~2010-12-28 14:55 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-28 14:55 Shawn Guo [this message]
2010-12-28 14:55 ` [PATCH 01/10] net/fec: fix MMFR_OP type in fec_enet_mdio_write Shawn Guo
2010-12-28 14:55 ` [PATCH 02/10] net/fec: remove the use of "index" which is legacy Shawn Guo
2010-12-28 14:55 ` [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac Shawn Guo
2010-12-29 5:29 ` Greg Ungerer
2010-12-29 9:51 ` Shawn Guo
2010-12-29 6:53 ` Baruch Siach
2010-12-29 10:05 ` Shawn Guo
2010-12-29 10:31 ` Uwe Kleine-König
2010-12-29 11:58 ` Shawn Guo
2010-12-29 12:42 ` Uwe Kleine-König
2010-12-30 2:12 ` Shawn Guo
2010-12-30 8:04 ` Uwe Kleine-König
2010-12-30 4:29 ` Shawn Guo
2010-12-30 5:29 ` Baruch Siach
2010-12-30 7:20 ` Shawn Guo
2010-12-29 10:30 ` Shawn Guo
2010-12-29 10:37 ` Uwe Kleine-König
2010-12-29 11:08 ` Shawn Guo
2010-12-29 11:10 ` Uwe Kleine-König
2010-12-29 12:00 ` Shawn Guo
2010-12-28 14:55 ` [PATCH 04/10] net/fec: improve pm for better suspend/resume Shawn Guo
2010-12-28 14:55 ` [PATCH 05/10] net/fec: add dual fec support for mx28 Shawn Guo
2010-12-28 14:55 ` [PATCH 06/10] ARM: mx28: update clocks for dual fec support Shawn Guo
2010-12-29 6:57 ` Baruch Siach
2010-12-29 8:10 ` Uwe Kleine-König
2010-12-29 10:14 ` Shawn Guo
2010-12-29 10:28 ` Uwe Kleine-König
2010-12-28 14:55 ` [PATCH 07/10] ARM: mx28: add the second fec device registration Shawn Guo
2010-12-29 10:50 ` Uwe Kleine-König
2010-12-29 12:05 ` Shawn Guo
2010-12-28 14:55 ` [PATCH 08/10] ARM: mxs: add ocotp read function Shawn Guo
2010-12-29 10:47 ` Uwe Kleine-König
2010-12-29 12:08 ` Shawn Guo
2010-12-29 13:47 ` Uwe Kleine-König
2010-12-29 11:22 ` Uwe Kleine-König
2010-12-30 5:50 ` Shawn Guo
2010-12-30 9:15 ` Uwe Kleine-König
2010-12-31 1:43 ` Shawn Guo
2010-12-31 16:11 ` Uwe Kleine-König
2011-01-01 13:03 ` Shawn Guo
2010-12-30 8:41 ` Shawn Guo
2010-12-30 9:02 ` Uwe Kleine-König
2010-12-31 1:46 ` Shawn Guo
2010-12-28 14:55 ` [PATCH 09/10] ARM: mx28: read fec mac address from ocotp Shawn Guo
2010-12-29 10:53 ` Uwe Kleine-König
2010-12-29 12:13 ` Shawn Guo
2010-12-29 12:45 ` Uwe Kleine-König
2010-12-30 2:19 ` Shawn Guo
2010-12-30 8:33 ` Shawn Guo
2010-12-28 14:55 ` [PATCH 10/10] ARM: mxs: add initial pm support Shawn Guo
2010-12-29 10:57 ` Uwe Kleine-König
2010-12-29 12:15 ` Shawn Guo
2010-12-30 8:50 ` Shawn Guo
2010-12-29 5:26 ` [PATCH 00/10] net/fec: add dual fec support for i.MX28 Greg Ungerer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1293548155-16328-1-git-send-email-shawn.guo@freescale.com \
--to=shawn.guo@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).