From: shawn.guo@freescale.com (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/10] net/fec: fix MMFR_OP type in fec_enet_mdio_write
Date: Tue, 28 Dec 2010 22:55:46 +0800 [thread overview]
Message-ID: <1293548155-16328-2-git-send-email-shawn.guo@freescale.com> (raw)
In-Reply-To: <1293548155-16328-1-git-send-email-shawn.guo@freescale.com>
FEC_MMFR_OP_WRITE should be used than FEC_MMFR_OP_READ in
a mdio write operation.
It's probably a typo introduced by commit:
e6b043d512fa8d9a3801bf5d72bfa3b8fc3b3cc8
netdev/fec.c: add phylib supporting to enable carrier detection (v2)
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
---
drivers/net/fec.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index cce32d4..52e9ca8 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -651,8 +651,8 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
fep->mii_timeout = 0;
init_completion(&fep->mdio_done);
- /* start a read op */
- writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
+ /* start a write op */
+ writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
FEC_MMFR_TA | FEC_MMFR_DATA(value),
fep->hwp + FEC_MII_DATA);
--
1.7.1
next prev parent reply other threads:[~2010-12-28 14:55 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-28 14:55 [PATCH 00/10] net/fec: add dual fec support for i.MX28 Shawn Guo
2010-12-28 14:55 ` Shawn Guo [this message]
2010-12-28 14:55 ` [PATCH 02/10] net/fec: remove the use of "index" which is legacy Shawn Guo
2010-12-28 14:55 ` [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac Shawn Guo
2010-12-29 5:29 ` Greg Ungerer
2010-12-29 9:51 ` Shawn Guo
2010-12-29 6:53 ` Baruch Siach
2010-12-29 10:05 ` Shawn Guo
2010-12-29 10:31 ` Uwe Kleine-König
2010-12-29 11:58 ` Shawn Guo
2010-12-29 12:42 ` Uwe Kleine-König
2010-12-30 2:12 ` Shawn Guo
2010-12-30 8:04 ` Uwe Kleine-König
2010-12-30 4:29 ` Shawn Guo
2010-12-30 5:29 ` Baruch Siach
2010-12-30 7:20 ` Shawn Guo
2010-12-29 10:30 ` Shawn Guo
2010-12-29 10:37 ` Uwe Kleine-König
2010-12-29 11:08 ` Shawn Guo
2010-12-29 11:10 ` Uwe Kleine-König
2010-12-29 12:00 ` Shawn Guo
2010-12-28 14:55 ` [PATCH 04/10] net/fec: improve pm for better suspend/resume Shawn Guo
2010-12-28 14:55 ` [PATCH 05/10] net/fec: add dual fec support for mx28 Shawn Guo
2010-12-28 14:55 ` [PATCH 06/10] ARM: mx28: update clocks for dual fec support Shawn Guo
2010-12-29 6:57 ` Baruch Siach
2010-12-29 8:10 ` Uwe Kleine-König
2010-12-29 10:14 ` Shawn Guo
2010-12-29 10:28 ` Uwe Kleine-König
2010-12-28 14:55 ` [PATCH 07/10] ARM: mx28: add the second fec device registration Shawn Guo
2010-12-29 10:50 ` Uwe Kleine-König
2010-12-29 12:05 ` Shawn Guo
2010-12-28 14:55 ` [PATCH 08/10] ARM: mxs: add ocotp read function Shawn Guo
2010-12-29 10:47 ` Uwe Kleine-König
2010-12-29 12:08 ` Shawn Guo
2010-12-29 13:47 ` Uwe Kleine-König
2010-12-29 11:22 ` Uwe Kleine-König
2010-12-30 5:50 ` Shawn Guo
2010-12-30 9:15 ` Uwe Kleine-König
2010-12-31 1:43 ` Shawn Guo
2010-12-31 16:11 ` Uwe Kleine-König
2011-01-01 13:03 ` Shawn Guo
2010-12-30 8:41 ` Shawn Guo
2010-12-30 9:02 ` Uwe Kleine-König
2010-12-31 1:46 ` Shawn Guo
2010-12-28 14:55 ` [PATCH 09/10] ARM: mx28: read fec mac address from ocotp Shawn Guo
2010-12-29 10:53 ` Uwe Kleine-König
2010-12-29 12:13 ` Shawn Guo
2010-12-29 12:45 ` Uwe Kleine-König
2010-12-30 2:19 ` Shawn Guo
2010-12-30 8:33 ` Shawn Guo
2010-12-28 14:55 ` [PATCH 10/10] ARM: mxs: add initial pm support Shawn Guo
2010-12-29 10:57 ` Uwe Kleine-König
2010-12-29 12:15 ` Shawn Guo
2010-12-30 8:50 ` Shawn Guo
2010-12-29 5:26 ` [PATCH 00/10] net/fec: add dual fec support for i.MX28 Greg Ungerer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1293548155-16328-2-git-send-email-shawn.guo@freescale.com \
--to=shawn.guo@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).