From: dwalker@codeaurora.org (Daniel Walker)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/7] msm: qsd8x50: add uart platform data
Date: Thu, 20 Jan 2011 12:32:39 -0800 [thread overview]
Message-ID: <1295555565-21563-2-git-send-email-dwalker@codeaurora.org> (raw)
In-Reply-To: <1295555565-21563-1-git-send-email-dwalker@codeaurora.org>
This enables the uart for QSD8x50.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
---
arch/arm/mach-msm/devices-qsd8x50.c | 42 +++++++++++++++++++++++++++++++++++
1 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index b1a8f0f..24b2051 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -28,6 +28,32 @@
#include <mach/mmc.h>
+static struct resource resources_uart1[] = {
+ {
+ .start = INT_UART1,
+ .end = INT_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = MSM_UART1_PHYS,
+ .end = MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource resources_uart2[] = {
+ {
+ .start = INT_UART2,
+ .end = INT_UART2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = MSM_UART2_PHYS,
+ .end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct resource resources_uart3[] = {
{
.start = INT_UART3,
@@ -41,6 +67,20 @@ static struct resource resources_uart3[] = {
},
};
+struct platform_device msm_device_uart1 = {
+ .name = "msm_serial",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(resources_uart1),
+ .resource = resources_uart1,
+};
+
+struct platform_device msm_device_uart2 = {
+ .name = "msm_serial",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(resources_uart2),
+ .resource = resources_uart2,
+};
+
struct platform_device msm_device_uart3 = {
.name = "msm_serial",
.id = 2,
@@ -345,6 +385,8 @@ struct clk msm_clocks_8x50[] = {
CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0),
CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0),
CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0),
+ CLK_PCOM("uart_clk", UART1_CLK, &msm_device_uart1.dev, OFF),
+ CLK_PCOM("uart_clk", UART2_CLK, &msm_device_uart2.dev, OFF),
CLK_PCOM("uart_clk", UART3_CLK, &msm_device_uart3.dev, OFF),
CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF),
CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF),
--
1.7.0.4
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-01-20 20:32 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-20 20:32 [PATCH 0/7] Nexus One Support Daniel Walker
2011-01-20 20:32 ` Daniel Walker [this message]
2011-01-20 20:32 ` [PATCH 2/7] [ARM] msm: qsd8k memory base is at 0x20000000 Daniel Walker
2011-01-20 20:32 ` [PATCH 3/7] msm: qsd8x50: add acpuclock code Daniel Walker
2011-01-20 20:32 ` [PATCH 4/7] msm: mahimahi: add mahimahi board file Daniel Walker
2011-01-20 20:32 ` [PATCH 5/7] msm: mahimahi: add in mmc support code Daniel Walker
2011-01-20 20:32 ` [PATCH 6/7] msm: mahimahi: add gpio pin muxing code Daniel Walker
2011-01-20 20:32 ` [PATCH 7/7] msm: mahimahi: initialize mmc at start up Daniel Walker
2011-01-21 0:42 ` [PATCH 0/7] Nexus One Support Dima Zavin
2011-01-21 0:55 ` Daniel Walker
2011-01-21 1:41 ` Joe Perches
2011-01-21 1:58 ` Daniel Walker
2011-01-21 2:13 ` Dima Zavin
2011-01-21 15:47 ` Daniel Walker
2011-01-21 2:25 ` Joe Perches
2011-01-21 3:41 ` Theodore Tso
2011-01-21 15:46 ` Daniel Walker
2011-01-21 17:48 ` Jesse Barnes
2011-01-21 17:56 ` Daniel Walker
2011-01-21 17:59 ` Christoph Hellwig
2011-01-21 17:56 ` Jesse Barnes
2011-01-21 18:00 ` Daniel Walker
2011-01-21 18:04 ` Jesse Barnes
2011-01-21 18:18 ` Daniel Walker
2011-01-21 18:27 ` Jesse Barnes
2011-01-21 18:35 ` Daniel Walker
2011-01-21 20:44 ` Dima Zavin
2011-01-21 20:49 ` Daniel Walker
2011-01-21 21:01 ` Jesse Barnes
2011-01-21 21:26 ` Daniel Walker
2011-01-21 21:42 ` Dima Zavin
2011-01-22 13:58 ` David Woodhouse
2011-01-21 21:02 ` Joe Perches
2011-01-21 21:24 ` Daniel Walker
2011-01-22 11:18 ` Pekka Enberg
2011-01-22 12:20 ` Russell King - ARM Linux
2011-01-22 18:06 ` Dima Zavin
2011-01-22 18:49 ` Russell King - ARM Linux
2011-01-22 20:50 ` Christoph Hellwig
2011-01-22 19:22 ` Brian Swetland
2011-01-22 19:49 ` Nicolas Pitre
2011-01-22 19:59 ` Brian Swetland
2011-01-22 20:53 ` Christoph Hellwig
2011-01-22 21:04 ` Russell King - ARM Linux
2011-01-22 21:57 ` Alan Cox
2011-01-23 2:38 ` David Woodhouse
2011-01-22 20:41 ` Christoph Hellwig
2011-01-21 21:05 ` Pekka Enberg
2011-01-21 21:17 ` Joe Perches
2011-01-21 23:49 ` Ted Ts'o
2011-01-22 0:03 ` Daniel Walker
2011-01-22 1:58 ` Steven Rostedt
2011-01-22 2:13 ` Daniel Walker
2011-01-22 2:32 ` Steven Rostedt
2011-01-22 2:31 ` Ted Ts'o
2011-01-22 8:19 ` Pekka Enberg
2011-01-22 10:35 ` Dima Zavin
2011-01-22 10:45 ` Anca Emanuel
2011-01-22 11:03 ` Pekka Enberg
2011-01-22 11:15 ` Pekka Enberg
2011-01-22 17:28 ` Thomas Gleixner
2011-01-22 18:07 ` Denis 'GNUtoo' Carikli
2011-01-22 18:15 ` Dima Zavin
2011-01-22 20:55 ` Christoph Hellwig
2011-01-22 21:56 ` Pekka Enberg
2011-01-22 21:58 ` Christoph Hellwig
2011-01-22 22:13 ` Pekka Enberg
2011-02-04 13:36 ` Pavel Machek
2011-02-07 17:36 ` Daniel Walker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295555565-21563-2-git-send-email-dwalker@codeaurora.org \
--to=dwalker@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).