From: sumit.semwal@ti.com (Sumit Semwal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 16/18] OMAP2,3: DSS2: replace printk with dev_dbg in init
Date: Sat, 22 Jan 2011 15:35:56 +0530 [thread overview]
Message-ID: <1295690758-5845-17-git-send-email-sumit.semwal@ti.com> (raw)
In-Reply-To: <1295690758-5845-1-git-send-email-sumit.semwal@ti.com>
This patch replaces printk's in the init/probe functions to dev_dbg
for boot time optimization.
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
---
drivers/video/omap2/dss/dispc.c | 2 +-
drivers/video/omap2/dss/dsi.c | 2 +-
drivers/video/omap2/dss/rfbi.c | 2 +-
drivers/video/omap2/dss/venc.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index abfed47..1c22cf0 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3350,7 +3350,7 @@ static int omap_dispchw_probe(struct platform_device *pdev)
dispc_save_context();
rev = dispc_read_reg(DISPC_REVISION);
- printk(KERN_INFO "OMAP DISPC rev %d.%d\n",
+ dev_dbg(&pdev->dev, "OMAP DISPC rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
enable_clocks(0);
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index d854137..39a1c04 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -3300,7 +3300,7 @@ static int dsi_init(struct platform_device *pdev)
enable_clocks(1);
rev = dsi_read_reg(DSI_REVISION);
- printk(KERN_INFO "OMAP DSI rev %d.%d\n",
+ dev_dbg(&pdev->dev, "OMAP DSI rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
enable_clocks(0);
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index a64e119..93b13c5 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -1046,7 +1046,7 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
rfbi_write_reg(RFBI_SYSCONFIG, l);
rev = rfbi_read_reg(RFBI_REVISION);
- printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
+ dev_dbg(&pdev->dev, "OMAP RFBI rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
rfbi_enable_clocks(0);
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 935ae8e..3db9061 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -739,7 +739,7 @@ static int omap_venchw_probe(struct platform_device *pdev)
venc_enable_clocks(1);
rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
- printk(KERN_INFO "OMAP VENC rev %d\n", rev_id);
+ dev_dbg(&pdev->dev, "OMAP VENC rev %d\n", rev_id);
venc_enable_clocks(0);
--
1.7.1
next prev parent reply other threads:[~2011-01-22 10:05 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-22 10:05 [PATCH v9 00/18] OMAP2,3: hwmod DSS Adaptation Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 01/18] OMAP2, 3: DSS2: remove forced clk-disable from omap_dss_remove Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 02/18] OMAP2420: hwmod data: add DSS DISPC RFBI VENC Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 03/18] OMAP2430: " Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 04/18] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 05/18] OMAP2,3 DSS2 Change driver name to omap_display Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 06/18] OMAP2,3 DSS2 Use Regulator init with driver name Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 07/18] OMAP2, 3: DSS2: Create new file display.c for central dss driver registration Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 08/18] OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 09/18] OMAP2,3: DSS2: Build omap_device for each DSS HWIP Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 10/18] OMAP2, 3: DSS2: DSS: create platform_driver, move init, exit to driver Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 11/18] OMAP2, 3: DSS2: Move clocks from core driver to dss driver Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 12/18] OMAP2, 3: DSS2: RFBI: create platform_driver, move init, exit to driver Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 13/18] OMAP2, 3: DSS2: DISPC: " Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 14/18] OMAP2, 3: DSS2: VENC: " Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 15/18] OMAP2, 3: DSS2: DSI: " Sumit Semwal
2011-01-22 10:05 ` Sumit Semwal [this message]
2011-01-22 10:05 ` [PATCH v9 17/18] OMAP2,3: DSS2: Use platform device to get baseaddr Sumit Semwal
2011-01-22 10:05 ` [PATCH v9 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device Sumit Semwal
2011-01-23 12:39 ` Sergei Shtylyov
2011-01-23 12:52 ` Russell King - ARM Linux
2011-01-24 5:50 ` Semwal, Sumit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295690758-5845-17-git-send-email-sumit.semwal@ti.com \
--to=sumit.semwal@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).