From: sumit.semwal@ti.com (Sumit Semwal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 02/18] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
Date: Mon, 24 Jan 2011 11:51:49 +0530 [thread overview]
Message-ID: <1295850125-21405-3-git-send-email-sumit.semwal@ti.com> (raw)
In-Reply-To: <1295850125-21405-1-git-send-email-sumit.semwal@ti.com>
From: Senthilvadivu Guruswamy <svadivu@ti.com>
Hwmod needs database of all IPs in a system. This patch generates the hwmod
database for OMAP2420 Display Sub System,. Since DSS is also considered as an
IP as DISPC, RFBI, name it as dss_core.
Acked-by: Benoit Cousson <b-cousson@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 311 +++++++++++++++++++++++++++-
arch/arm/plat-omap/include/plat/l3_2xxx.h | 20 ++
arch/arm/plat-omap/include/plat/l4_2xxx.h | 24 +++
3 files changed, 354 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/plat-omap/include/plat/l3_2xxx.h
create mode 100644 arch/arm/plat-omap/include/plat/l4_2xxx.h
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index b85c630..21014de 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -18,7 +18,8 @@
#include <plat/serial.h>
#include <plat/i2c.h>
#include <plat/gpio.h>
-
+#include <plat/l3_2xxx.h>
+#include <plat/l4_2xxx.h>
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
@@ -38,6 +39,10 @@ static struct omap_hwmod omap2420_mpu_hwmod;
static struct omap_hwmod omap2420_iva_hwmod;
static struct omap_hwmod omap2420_l3_main_hwmod;
static struct omap_hwmod omap2420_l4_core_hwmod;
+static struct omap_hwmod omap2420_dss_core_hwmod;
+static struct omap_hwmod omap2420_dss_dispc_hwmod;
+static struct omap_hwmod omap2420_dss_rfbi_hwmod;
+static struct omap_hwmod omap2420_dss_venc_hwmod;
static struct omap_hwmod omap2420_wd_timer2_hwmod;
static struct omap_hwmod omap2420_gpio1_hwmod;
static struct omap_hwmod omap2420_gpio2_hwmod;
@@ -64,6 +69,19 @@ static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = {
&omap2420_mpu__l3_main,
};
+/* DSS -> l3 */
+static struct omap_hwmod_ocp_if omap2420_dss__l3 = {
+ .master = &omap2420_dss_core_hwmod,
+ .slave = &omap2420_l3_main_hwmod,
+ .fw = {
+ .omap2 = {
+ .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS,
+ .flags = OMAP_FIREWALL_L3,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* Master interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = {
&omap2420_l3_main__l4_core,
@@ -470,6 +488,291 @@ static struct omap_hwmod omap2420_uart3_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
+/*
+ * 'dss' class
+ * display sub-system
+ */
+
+static struct omap_hwmod_class_sysconfig omap2420_dss_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2420_dss_hwmod_class = {
+ .name = "dss",
+ .sysc = &omap2420_dss_sysc,
+};
+
+/* dss */
+static struct omap_hwmod_irq_info omap2420_dss_irqs[] = {
+ { .irq = 25 },
+};
+
+static struct omap_hwmod_dma_info omap2420_dss_sdma_chs[] = {
+ { .name = "dispc", .dma_req = 5 },
+};
+
+/* dss */
+/* dss master ports */
+static struct omap_hwmod_ocp_if *omap2420_dss_masters[] = {
+ &omap2420_dss__l3,
+};
+
+static struct omap_hwmod_addr_space omap2420_dss_addrs[] = {
+ {
+ .pa_start = 0x48050000,
+ .pa_end = 0x480503FF,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* l4_core -> dss */
+static struct omap_hwmod_ocp_if omap2420_l4_core__dss = {
+ .master = &omap2420_l4_core_hwmod,
+ .slave = &omap2420_dss_core_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2420_dss_addrs,
+ .addr_cnt = ARRAY_SIZE(omap2420_dss_addrs),
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dss slave ports */
+static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
+ &omap2420_l4_core__dss,
+};
+
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ { .role = "tv_clk", .clk = "dss_54m_fck" },
+ { .role = "sys_clk", .clk = "dss2_fck" },
+};
+
+static struct omap_hwmod omap2420_dss_core_hwmod = {
+ .name = "dss_core",
+ .class = &omap2420_dss_hwmod_class,
+ .main_clk = "dss1_fck", /* instead of dss_fck */
+ .mpu_irqs = omap2420_dss_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dss_irqs),
+ .sdma_reqs = omap2420_dss_sdma_chs,
+ .sdma_reqs_cnt = ARRAY_SIZE(omap2420_dss_sdma_chs),
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_DSS1_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
+ },
+ },
+ .opt_clks = dss_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
+ .slaves = omap2420_dss_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
+ .masters = omap2420_dss_masters,
+ .masters_cnt = ARRAY_SIZE(omap2420_dss_masters),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2420_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2420_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap2420_dispc_sysc,
+};
+
+static struct omap_hwmod_addr_space omap2420_dss_dispc_addrs[] = {
+ {
+ .pa_start = 0x48050400,
+ .pa_end = 0x480507FF,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* l4_core -> dss_dispc */
+static struct omap_hwmod_ocp_if omap2420_l4_core__dss_dispc = {
+ .master = &omap2420_l4_core_hwmod,
+ .slave = &omap2420_dss_dispc_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2420_dss_dispc_addrs,
+ .addr_cnt = ARRAY_SIZE(omap2420_dss_dispc_addrs),
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dss_dispc slave ports */
+static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = {
+ &omap2420_l4_core__dss_dispc,
+};
+
+static struct omap_hwmod omap2420_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &omap2420_dispc_hwmod_class,
+ .main_clk = "dss1_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_DSS1_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
+ },
+ },
+ .slaves = omap2420_dss_dispc_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/*
+ * 'rfbi' class
+ * remote frame buffer interface
+ */
+
+static struct omap_hwmod_class_sysconfig omap2420_rfbi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2420_rfbi_hwmod_class = {
+ .name = "rfbi",
+ .sysc = &omap2420_rfbi_sysc,
+};
+
+static struct omap_hwmod_addr_space omap2420_dss_rfbi_addrs[] = {
+ {
+ .pa_start = 0x48050800,
+ .pa_end = 0x48050BFF,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* l4_core -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap2420_l4_core__dss_rfbi = {
+ .master = &omap2420_l4_core_hwmod,
+ .slave = &omap2420_dss_rfbi_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2420_dss_rfbi_addrs,
+ .addr_cnt = ARRAY_SIZE(omap2420_dss_rfbi_addrs),
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dss_rfbi slave ports */
+static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
+ &omap2420_l4_core__dss_rfbi,
+};
+
+static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap2420_rfbi_hwmod_class,
+ .main_clk = "dss1_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_DSS1_SHIFT,
+ .module_offs = CORE_MOD,
+ },
+ },
+ .slaves = omap2420_dss_rfbi_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/*
+ * 'venc' class
+ * video encoder
+ */
+
+static struct omap_hwmod_class omap2420_venc_hwmod_class = {
+ .name = "venc",
+};
+
+/* dss_venc */
+static struct omap_hwmod_addr_space omap2420_dss_venc_addrs[] = {
+ {
+ .pa_start = 0x48050C00,
+ .pa_end = 0x48050FFF,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* l4_core -> dss_venc */
+static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
+ .master = &omap2420_l4_core_hwmod,
+ .slave = &omap2420_dss_venc_hwmod,
+ .clk = "dss_54m_fck",
+ .addr = omap2420_dss_venc_addrs,
+ .addr_cnt = ARRAY_SIZE(omap2420_dss_venc_addrs),
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dss_venc slave ports */
+static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
+ &omap2420_l4_core__dss_venc,
+};
+
+static struct omap_hwmod omap2420_dss_venc_hwmod = {
+ .name = "dss_venc",
+ .class = &omap2420_venc_hwmod_class,
+ .main_clk = "dss1_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_DSS1_SHIFT,
+ .module_offs = CORE_MOD,
+ },
+ },
+ .slaves = omap2420_dss_venc_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
+};
+
/* I2C common */
static struct omap_hwmod_class_sysconfig i2c_sysc = {
.rev_offs = 0x00,
@@ -874,6 +1177,12 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = {
&omap2420_uart1_hwmod,
&omap2420_uart2_hwmod,
&omap2420_uart3_hwmod,
+ /* dss class */
+ &omap2420_dss_core_hwmod,
+ &omap2420_dss_dispc_hwmod,
+ &omap2420_dss_rfbi_hwmod,
+ &omap2420_dss_venc_hwmod,
+ /* i2c class */
&omap2420_i2c1_hwmod,
&omap2420_i2c2_hwmod,
diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/plat-omap/include/plat/l3_2xxx.h
new file mode 100644
index 0000000..b8b5641
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l3_2xxx.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+
+/* L3 CONNIDs */
+/* Display Sub system (DSS) */
+#define OMAP2_L3_CORE_FW_CONNID_DSS 8
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/plat-omap/include/plat/l4_2xxx.h
new file mode 100644
index 0000000..3f39cf8
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l4_2xxx.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+
+/* L4 CORE */
+/* Display Sub system (DSS) */
+#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION 28
+#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION 29
+#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION 30
+#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION 31
+#define OMAP2420_L4_CORE_FW_DSS_TA_REGION 32
+
+#endif
--
1.7.1
next prev parent reply other threads:[~2011-01-24 6:21 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-24 6:21 [PATCH v10 00/18] OMAP2,3: hwmod DSS Adaptation Sumit Semwal
2011-01-24 6:21 ` [PATCH v10 01/18] OMAP2, 3: DSS2: remove forced clk-disable from omap_dss_remove Sumit Semwal
2011-01-24 6:21 ` Sumit Semwal [this message]
2011-01-24 6:21 ` [PATCH v10 03/18] OMAP2430: hwmod data: add DSS DISPC RFBI VENC Sumit Semwal
2011-01-24 6:21 ` [PATCH v10 04/18] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC Sumit Semwal
2011-01-24 6:21 ` [PATCH v10 05/18] OMAP2,3 DSS2 Change driver name to omap_display Sumit Semwal
2011-02-24 9:27 ` Tomi Valkeinen
2011-02-28 6:53 ` Tomi Valkeinen
2011-02-28 7:09 ` [PATCH v10 05/18] OMAP2, 3 " archit taneja
2011-02-28 7:19 ` [PATCH v10 05/18] OMAP2,3 " Tomi Valkeinen
2011-02-28 7:27 ` [PATCH v10 05/18] OMAP2, 3 " archit taneja
2011-02-28 8:16 ` Semwal, Sumit
2011-02-28 8:29 ` [PATCH v10 05/18] OMAP2,3 " Tomi Valkeinen
2011-02-28 11:36 ` [PATCH v10 05/18] OMAP2, 3 " Cousson, Benoit
2011-02-28 12:10 ` [PATCH v10 05/18] OMAP2,3 " Tomi Valkeinen
2011-02-28 12:13 ` Russell King - ARM Linux
2011-02-28 13:38 ` [PATCH v10 05/18] OMAP2, 3 " Cousson, Benoit
2011-02-28 14:06 ` [PATCH v10 05/18] OMAP2,3 " Russell King - ARM Linux
2011-02-28 14:55 ` [PATCH v10 05/18] OMAP2, 3 " Cousson, Benoit
2011-02-28 14:00 ` Cousson, Benoit
2011-02-28 14:57 ` [PATCH v10 05/18] OMAP2,3 " Tomi Valkeinen
2011-03-01 10:18 ` [PATCH v10 05/18] OMAP2, 3 " Cousson, Benoit
2011-01-24 6:21 ` [PATCH v10 06/18] OMAP2,3 DSS2 Use Regulator init with driver name Sumit Semwal
2011-01-24 6:21 ` [PATCH v10 07/18] OMAP2, 3: DSS2: Create new file display.c for central dss driver registration Sumit Semwal
2011-01-24 6:21 ` [PATCH v10 08/18] OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() Sumit Semwal
2011-01-24 6:21 ` [PATCH v10 09/18] OMAP2,3: DSS2: Build omap_device for each DSS HWIP Sumit Semwal
2011-01-24 6:21 ` [PATCH v10 10/18] OMAP2, 3: DSS2: DSS: create platform_driver, move init, exit to driver Sumit Semwal
2011-01-24 6:21 ` [PATCH v10 11/18] OMAP2, 3: DSS2: Move clocks from core driver to dss driver Sumit Semwal
2011-01-24 6:21 ` [PATCH v10 12/18] OMAP2, 3: DSS2: RFBI: create platform_driver, move init, exit to driver Sumit Semwal
2011-01-24 6:22 ` [PATCH v10 13/18] OMAP2, 3: DSS2: DISPC: " Sumit Semwal
2011-01-24 6:22 ` [PATCH v10 14/18] OMAP2, 3: DSS2: VENC: " Sumit Semwal
2011-01-24 6:22 ` [PATCH v10 15/18] OMAP2, 3: DSS2: DSI: " Sumit Semwal
2011-01-24 6:22 ` [PATCH v10 16/18] OMAP2,3: DSS2: replace printk with dev_dbg in init Sumit Semwal
2011-01-24 6:22 ` [PATCH v10 17/18] OMAP2,3: DSS2: Use platform device to get baseaddr Sumit Semwal
2011-01-24 6:22 ` [PATCH v10 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device Sumit Semwal
2011-01-27 12:49 ` [PATCH v10 18/18] OMAP2, 3: " Raghuveer Murthy
2011-01-27 12:59 ` Russell King - ARM Linux
2011-01-27 13:04 ` Raghuveer Murthy
2011-01-27 15:23 ` Semwal, Sumit
2011-02-14 14:09 ` [PATCH v10 18/18] OMAP2,3: " Tomi Valkeinen
2011-02-14 18:35 ` [PATCH v10 18/18] OMAP2, 3: " Semwal, Sumit
2011-01-24 21:57 ` [PATCH v10 00/18] OMAP2,3: hwmod DSS Adaptation Kevin Hilman
2011-01-25 17:03 ` Tony Lindgren
2011-01-28 12:01 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295850125-21405-3-git-send-email-sumit.semwal@ti.com \
--to=sumit.semwal@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).