From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 1/5] msm: clock: Remove unused code and definitions
Date: Wed, 26 Jan 2011 16:20:52 -0800 [thread overview]
Message-ID: <1296087656-3693-2-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1296087656-3693-1-git-send-email-sboyd@codeaurora.org>
This code is dead or otherwise useless so just remove it.
Reviewed-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/mach-msm/board-msm8x60.c | 4 ---
arch/arm/mach-msm/clock.c | 20 +---------------
arch/arm/mach-msm/clock.h | 42 -------------------------------------
3 files changed, 2 insertions(+), 64 deletions(-)
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 9b5eb2b..b3c55f1 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -28,10 +28,6 @@
#include <mach/board.h>
#include <mach/msm_iomap.h>
-unsigned long clk_get_max_axi_khz(void)
-{
- return 0;
-}
static void __init msm8x60_map_io(void)
{
diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c
index 2069bfa..b67498d 100644
--- a/arch/arm/mach-msm/clock.c
+++ b/arch/arm/mach-msm/clock.c
@@ -37,13 +37,6 @@ struct clk *msm_clocks;
unsigned msm_num_clocks;
/*
- * Bitmap of enabled clocks, excluding ACPU which is always
- * enabled
- */
-static DECLARE_BITMAP(clock_map_enabled, NR_CLKS);
-static DEFINE_SPINLOCK(clock_map_lock);
-
-/*
* Standard clock functions defined in include/linux/clk.h
*/
struct clk *clk_get(struct device *dev, const char *id)
@@ -77,12 +70,8 @@ int clk_enable(struct clk *clk)
unsigned long flags;
spin_lock_irqsave(&clocks_lock, flags);
clk->count++;
- if (clk->count == 1) {
+ if (clk->count == 1)
clk->ops->enable(clk->id);
- spin_lock(&clock_map_lock);
- clock_map_enabled[BIT_WORD(clk->id)] |= BIT_MASK(clk->id);
- spin_unlock(&clock_map_lock);
- }
spin_unlock_irqrestore(&clocks_lock, flags);
return 0;
}
@@ -94,12 +83,8 @@ void clk_disable(struct clk *clk)
spin_lock_irqsave(&clocks_lock, flags);
BUG_ON(clk->count == 0);
clk->count--;
- if (clk->count == 0) {
+ if (clk->count == 0)
clk->ops->disable(clk->id);
- spin_lock(&clock_map_lock);
- clock_map_enabled[BIT_WORD(clk->id)] &= ~BIT_MASK(clk->id);
- spin_unlock(&clock_map_lock);
- }
spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
@@ -196,7 +181,6 @@ void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks)
{
unsigned n;
- spin_lock_init(&clocks_lock);
mutex_lock(&clocks_mutex);
msm_clocks = clock_tbl;
msm_num_clocks = num_clocks;
diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h
index c270b55..db9a77a 100644
--- a/arch/arm/mach-msm/clock.h
+++ b/arch/arm/mach-msm/clock.h
@@ -59,51 +59,9 @@ struct clk {
struct device *dev;
};
-#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100)
-#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104)
-#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124)
-
-#ifdef CONFIG_DEBUG_FS
-#define CLOCK_DBG_NAME(x) .dbg_name = x,
-#else
-#define CLOCK_DBG_NAME(x)
-#endif
-
-#define CLOCK(clk_name, clk_id, clk_dev, clk_flags) { \
- .name = clk_name, \
- .id = clk_id, \
- .flags = clk_flags, \
- .dev = clk_dev, \
- CLOCK_DBG_NAME(#clk_id) \
- }
-
#define OFF CLKFLAG_AUTO_OFF
#define CLK_MIN CLKFLAG_MIN
#define CLK_MAX CLKFLAG_MAX
#define CLK_MINMAX (CLK_MIN | CLK_MAX)
-#define NR_CLKS P_NR_CLKS
-
-enum {
- PLL_0 = 0,
- PLL_1,
- PLL_2,
- PLL_3,
- PLL_4,
- PLL_5,
- PLL_6,
- NUM_PLL
-};
-
-enum clkvote_client {
- CLKVOTE_ACPUCLK = 0,
- CLKVOTE_PMQOS,
- CLKVOTE_MAX,
-};
-
-int msm_clock_require_tcxo(unsigned long *reason, int nbits);
-int msm_clock_get_name(uint32_t id, char *name, uint32_t size);
-int ebi1_clk_set_min_rate(enum clkvote_client client, unsigned long rate);
-unsigned long clk_get_max_axi_khz(void);
#endif
-
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-01-27 0:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-27 0:20 [PATCHv2 0/5] MSM: clock debugfs and cleanups Stephen Boyd
2011-01-27 0:20 ` Stephen Boyd [this message]
2011-01-27 0:20 ` [PATCHv2 2/5] msm: clock: Remove 7x30 and pcom includes from clock.h Stephen Boyd
2011-01-27 0:20 ` [PATCHv2 3/5] msm: clock: Move debugfs code from clock.c to clock-debug.c Stephen Boyd
2011-01-27 0:20 ` [PATCHv2 4/5] msm: clock: Invert debugfs directory layout Stephen Boyd
2011-01-27 0:20 ` [PATCHv2 5/5] msm: clock: Add support for more proc_comm clocks Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1296087656-3693-2-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).