[PATCH 13/13] ARM i.MX51 efikamx: remove unnecessary CONFIG_SERIAL_IMX ifdefs

[s.hauer@pengutronix.de (Sascha Hauer)]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/board-mx51_efikamx.c |   17 +++--------------
 1 files changed, 3 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index b7946f8..e237040 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -121,23 +121,10 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = {
 };
 
 /* Serial ports */
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
 static const struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static inline void mxc_init_imx_uart(void)
-{
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, &uart_pdata);
-	imx51_add_imx_uart(2, &uart_pdata);
-}
-#else /* !SERIAL_IMX */
-static inline void mxc_init_imx_uart(void)
-{
-}
-#endif /* SERIAL_IMX */
-
 /* This function is board specific as the bit mask for the plldiv will also
  * be different for other Freescale SoCs, thus a common bitmask is not
  * possible and cannot get place in /plat-mxc/ehci.c.
@@ -320,7 +307,9 @@ static void __init mxc_board_init(void)
 					ARRAY_SIZE(mx51efikamx_pads));
 	mx51_efikamx_board_id();
 	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
-	mxc_init_imx_uart();
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(2, &uart_pdata);
 	imx51_add_sdhci_esdhc_imx(0, NULL);
 
 	/* on < 1.2 boards both SD controllers are used */
-- 
1.7.2.3