From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: mxs: dynamically register flexcan devices for mx28
Date: Wed, 2 Feb 2011 13:50:30 +0100 [thread overview]
Message-ID: <1296651030-30792-3-git-send-email-mkl@pengutronix.de> (raw)
In-Reply-To: <1296651030-30792-1-git-send-email-mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
arch/arm/mach-mxs/devices-mx28.h | 6 +++
arch/arm/mach-mxs/devices/Kconfig | 4 ++
arch/arm/mach-mxs/devices/Makefile | 1 +
arch/arm/mach-mxs/devices/platform-flexcan.c | 51 +++++++++++++++++++++++
arch/arm/mach-mxs/include/mach/devices-common.h | 12 +++++
5 files changed, 74 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-mxs/devices/platform-flexcan.c
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 1ab7bf0..3b18304 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -26,3 +26,9 @@ extern const struct mxs_auart_data mx28_auart_data[] __initconst;
extern const struct mxs_fec_data mx28_fec_data[] __initconst;
#define mx28_add_fec(id, pdata) \
mxs_add_fec(&mx28_fec_data[id], pdata)
+
+extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
+#define mx28_add_flexcan(id, pdata) \
+ mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
+#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
+#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index 3001b75..6c65b67 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -7,3 +7,7 @@ config MXS_HAVE_PLATFORM_AUART
config MXS_HAVE_PLATFORM_FEC
bool
+
+config MXS_HAVE_PLATFORM_FLEXCAN
+ select HAVE_CAN_FLEXCAN if CAN
+ bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index c814d05..a8dc8d5 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
diff --git a/arch/arm/mach-mxs/devices/platform-flexcan.c b/arch/arm/mach-mxs/devices/platform-flexcan.c
new file mode 100644
index 0000000..43a6b4b
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-flexcan.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2010, 2011 Pengutronix,
+ * Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_CAN ## _hwid, \
+ }
+
+#define mxs_flexcan_data_entry(soc, _id, _hwid, _size) \
+ [_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = {
+#define mx28_flexcan_data_entry(_id, _hwid) \
+ mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K)
+ mx28_flexcan_data_entry(0, 0),
+ mx28_flexcan_data_entry(1, 1),
+};
+#endif /* ifdef CONFIG_SOC_IMX28 */
+
+struct platform_device *__init mxs_add_flexcan(
+ const struct mxs_flexcan_data *data,
+ const struct flexcan_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("flexcan", data->id,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index bed4002..e7aefb4 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -51,3 +51,15 @@ struct mxs_fec_data {
struct platform_device *__init mxs_add_fec(
const struct mxs_fec_data *data,
const struct fec_platform_data *pdata);
+
+/* flexcan */
+#include <linux/can/platform/flexcan.h>
+struct mxs_flexcan_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init mxs_add_flexcan(
+ const struct mxs_flexcan_data *data,
+ const struct flexcan_platform_data *pdata);
--
1.7.2.3
prev parent reply other threads:[~2011-02-02 12:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-02 12:50 [PATCH 0/2] ARM: mxs: add flexcan support Marc Kleine-Budde
2011-02-02 12:50 ` [PATCH 1/2] ARM: mxs: adjust flexcan clock definition Marc Kleine-Budde
2011-02-02 12:50 ` Marc Kleine-Budde [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1296651030-30792-3-git-send-email-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).