[PATCH v3 4/5] ARM: omap3: Thumb-2 compatibility for sram34xx.S

[dave.martin@linaro.org (Dave Martin)]

 * Remove deprecated/undefined PC-relative stores
 * Add the required ENDPROC() directive for each ENTRY().
 * .align before data words

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
 arch/arm/mach-omap2/sram34xx.S |   28 ++++++++++++++++++++--------
 1 files changed, 20 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 7f893a2..829d235 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -116,24 +116,34 @@ ENTRY(omap3_sram_configure_core_dpll)
 
 					@ pull the extra args off the stack
 					@  and store them in SRAM
+
+@ PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
+@ base instead.
+@ Be careful not to clobber r7 when maintaing this file.
+ THUMB(	adr	r7, omap3_sram_configure_core_dpll			)
+	.macro strtext Rt:req, label:req
+ ARM(	str	\Rt, \label						)
+ THUMB(	str	\Rt, [r7, \label - omap3_sram_configure_core_dpll]	)
+	.endm
+
 	ldr	r4, [sp, #52]
-	str     r4, omap_sdrc_rfr_ctrl_0_val
+	strtext	r4, omap_sdrc_rfr_ctrl_0_val
 	ldr	r4, [sp, #56]
-	str     r4, omap_sdrc_actim_ctrl_a_0_val
+	strtext	r4, omap_sdrc_actim_ctrl_a_0_val
 	ldr	r4, [sp, #60]
-	str     r4, omap_sdrc_actim_ctrl_b_0_val
+	strtext	r4, omap_sdrc_actim_ctrl_b_0_val
 	ldr	r4, [sp, #64]
-	str     r4, omap_sdrc_mr_0_val
+	strtext	r4, omap_sdrc_mr_0_val
 	ldr	r4, [sp, #68]
-	str     r4, omap_sdrc_rfr_ctrl_1_val
+	strtext	r4, omap_sdrc_rfr_ctrl_1_val
 	cmp	r4, #0			@ if SDRC_RFR_CTRL_1 is 0,
 	beq	skip_cs1_params		@  do not use cs1 params
 	ldr	r4, [sp, #72]
-	str     r4, omap_sdrc_actim_ctrl_a_1_val
+	strtext	r4, omap_sdrc_actim_ctrl_a_1_val
 	ldr	r4, [sp, #76]
-	str     r4, omap_sdrc_actim_ctrl_b_1_val
+	strtext	r4, omap_sdrc_actim_ctrl_b_1_val
 	ldr	r4, [sp, #80]
-	str     r4, omap_sdrc_mr_1_val
+	strtext	r4, omap_sdrc_mr_1_val
 skip_cs1_params:
 	mrc	p15, 0, r8, c1, c0, 0	@ read ctrl register
 	bic	r10, r8, #0x800		@ clear Z-bit, disable branch prediction
@@ -271,6 +281,7 @@ skip_cs1_prog:
 	ldr	r12, [r11]		@ posted-write barrier for SDRC
 	bx	lr
 
+	.align
 omap3_sdrc_power:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
 omap3_cm_clksel1_pll:
@@ -319,6 +330,7 @@ omap3_sdrc_dlla_ctrl:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 core_m2_mask_val:
 	.word 0x07FFFFFF
+ENDPROC(omap3_sram_configure_core_dpll)
 
 ENTRY(omap3_sram_configure_core_dpll_sz)
 	.word	. - omap3_sram_configure_core_dpll
-- 
1.7.1