linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops
Date: Thu, 10 Feb 2011 14:46:36 +0530	[thread overview]
Message-ID: <1297329400-5936-4-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1297329400-5936-3-git-send-email-rnayak@ti.com>

On OMAP various clock nodes (dpll's, mx post dividers, interface clocks)
support hardware level autogating which can be controlled from
software.
Support such functionality by adding two new function pointer
allow_idle and deny_idle in the clkops structure.

These function pointers can be populated for any clock
node which supports hardware level autogating.

Also add 2 new functions (omap_clk_enable_auotidle and
omap_clk_disable_autoidle) which can be called from
architecture specific PM core code, if hardware level
autogating (for all supported clock nodes) is to be
enabled or disabled.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
 arch/arm/plat-omap/clock.c              |   26 ++++++++++++++++++++++++++
 arch/arm/plat-omap/include/plat/clock.h |    6 ++++++
 2 files changed, 32 insertions(+), 0 deletions(-)

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index fc62fb5..6889c5a 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -335,6 +335,32 @@ struct clk *omap_clk_get_by_name(const char *name)
 	return ret;
 }
 
+void omap_clk_enable_autoidle(void)
+{
+	struct clk *c;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(c, &clocks, node)
+		if (c->ops->allow_idle)
+			c->ops->allow_idle(c);
+
+	mutex_unlock(&clocks_mutex);
+}
+
+void omap_clk_disable_autoidle(void)
+{
+	struct clk *c;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(c, &clocks, node)
+		if (c->ops->deny_idle)
+			c->ops->deny_idle(c);
+
+	mutex_unlock(&clocks_mutex);
+}
+
 /*
  * Low level helpers
  */
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 8eb0ada..167f1e0 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -25,6 +25,8 @@ struct clockdomain;
  * @disable: fn ptr that enables the current clock in hardware
  * @find_idlest: function returning the IDLEST register for the clock's IP blk
  * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
  *
  * A "companion" clk is an accompanying clock to the one being queried
  * that must be enabled for the IP module connected to the clock to
@@ -42,6 +44,8 @@ struct clkops {
 					       u8 *, u8 *);
 	void			(*find_companion)(struct clk *, void __iomem **,
 						  u8 *);
+	void			(*allow_idle)(struct clk *);
+	void			(*deny_idle)(struct clk *);
 };
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
@@ -292,6 +296,8 @@ extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
 extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
 #endif
 extern struct clk *omap_clk_get_by_name(const char *name);
+extern void omap_clk_enable_autoidle(void);
+extern void omap_clk_disable_autoidle(void);
 
 extern const struct clkops clkops_null;
 
-- 
1.7.0.4

  reply	other threads:[~2011-02-10  9:16 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-10  9:16 [PATCH v2 0/7] clock/dpll autoidle support Rajendra Nayak
2011-02-10  9:16 ` [PATCH v2 1/7] omap: clock: Check for enable/disable ops support Rajendra Nayak
2011-02-10  9:16   ` [PATCH v2 2/7] omap3: dpll: Populate clkops for dpll1_ck Rajendra Nayak
2011-02-10  9:16     ` Rajendra Nayak [this message]
2011-02-10  9:16       ` [PATCH v2 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's Rajendra Nayak
2011-02-10  9:16         ` [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot Rajendra Nayak
2011-02-10  9:16           ` [PATCH v2 6/7] omap4: dpll: Add dpll api to control GATE_CTRL Rajendra Nayak
2011-02-10  9:16             ` [PATCH v2 7/7] omap4: dpll: Enable auto gate control for all MX postdividers Rajendra Nayak
2011-02-13  1:10               ` Paul Walmsley
2011-02-14 12:34                 ` Rajendra Nayak
2011-02-13  1:08             ` [PATCH v2 6/7] omap4: dpll: Add dpll api to control GATE_CTRL Paul Walmsley
2011-02-13  0:42           ` [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot Paul Walmsley
2011-02-14 12:32             ` Rajendra Nayak
2011-02-14 16:52               ` Paul Walmsley
2011-02-16 22:37               ` Paul Walmsley
2011-02-13  0:28         ` [PATCH v2 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's Paul Walmsley
2011-02-14 12:29           ` Rajendra Nayak
2011-02-14 16:51             ` Paul Walmsley
2011-02-13  0:04       ` [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops Paul Walmsley
2011-02-13  0:25         ` Paul Walmsley
2011-02-14 12:23         ` Rajendra Nayak
2011-02-14 16:50           ` Paul Walmsley
2011-02-13  1:17 ` [PATCH v2 0/7] clock/dpll autoidle support Paul Walmsley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1297329400-5936-4-git-send-email-rnayak@ti.com \
    --to=rnayak@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).