From: stepanm@codeaurora.org (Stepan Moskovchenko)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets
Date: Fri, 11 Feb 2011 12:28:17 -0800 [thread overview]
Message-ID: <1297456098-3241-2-git-send-email-stepanm@codeaurora.org> (raw)
In-Reply-To: <1297456098-3241-1-git-send-email-stepanm@codeaurora.org>
Make the IOMMU platform data target-independent in
preparation for adding MSM8960 IOMMU support. The IOMMU
configuration on MSM8x60 and MSM8960 is identical and the
same platform data can be used for both.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
---
arch/arm/mach-msm/Makefile | 4 +-
.../{devices-msm8x60-iommu.c => devices-iommu.c} | 54 +++++++++----------
arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 36 -------------
3 files changed, 28 insertions(+), 66 deletions(-)
rename arch/arm/mach-msm/{devices-msm8x60-iommu.c => devices-iommu.c} (93%)
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 81f4811..2099c97 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -4,12 +4,12 @@ obj-$(CONFIG_DEBUG_FS) += clock-debug.o
endif
obj-$(CONFIG_MSM_VIC) += irq-vic.o
-obj-$(CONFIG_MSM_IOMMU) += iommu.o iommu_dev.o
+obj-$(CONFIG_MSM_IOMMU) += iommu.o iommu_dev.o devices-iommu.o
obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o
obj-$(CONFIG_ARCH_MSM7X30) += dma.o
obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o
-obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o devices-msm8x60-iommu.o
+obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o
obj-$(CONFIG_ARCH_MSM8960) += clock-dummy.o
obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
diff --git a/arch/arm/mach-msm/devices-msm8x60-iommu.c b/arch/arm/mach-msm/devices-iommu.c
similarity index 93%
rename from arch/arm/mach-msm/devices-msm8x60-iommu.c
rename to arch/arm/mach-msm/devices-iommu.c
index f9e7bd3..c0206b7 100644
--- a/arch/arm/mach-msm/devices-msm8x60-iommu.c
+++ b/arch/arm/mach-msm/devices-iommu.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -18,15 +18,13 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/bootmem.h>
-
-#include <mach/msm_iomap-8x60.h>
-#include <mach/irqs-8x60.h>
+#include <mach/irqs.h>
#include <mach/iommu.h>
static struct resource msm_iommu_jpegd_resources[] = {
{
- .start = MSM_IOMMU_JPEGD_PHYS,
- .end = MSM_IOMMU_JPEGD_PHYS + MSM_IOMMU_JPEGD_SIZE - 1,
+ .start = 0x07300000,
+ .end = 0x07300000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -46,8 +44,8 @@ static struct resource msm_iommu_jpegd_resources[] = {
static struct resource msm_iommu_vpe_resources[] = {
{
- .start = MSM_IOMMU_VPE_PHYS,
- .end = MSM_IOMMU_VPE_PHYS + MSM_IOMMU_VPE_SIZE - 1,
+ .start = 0x07400000,
+ .end = 0x07400000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -67,8 +65,8 @@ static struct resource msm_iommu_vpe_resources[] = {
static struct resource msm_iommu_mdp0_resources[] = {
{
- .start = MSM_IOMMU_MDP0_PHYS,
- .end = MSM_IOMMU_MDP0_PHYS + MSM_IOMMU_MDP0_SIZE - 1,
+ .start = 0x07500000,
+ .end = 0x07500000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -88,8 +86,8 @@ static struct resource msm_iommu_mdp0_resources[] = {
static struct resource msm_iommu_mdp1_resources[] = {
{
- .start = MSM_IOMMU_MDP1_PHYS,
- .end = MSM_IOMMU_MDP1_PHYS + MSM_IOMMU_MDP1_SIZE - 1,
+ .start = 0x07600000,
+ .end = 0x07600000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -109,8 +107,8 @@ static struct resource msm_iommu_mdp1_resources[] = {
static struct resource msm_iommu_rot_resources[] = {
{
- .start = MSM_IOMMU_ROT_PHYS,
- .end = MSM_IOMMU_ROT_PHYS + MSM_IOMMU_ROT_SIZE - 1,
+ .start = 0x07700000,
+ .end = 0x07700000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -130,8 +128,8 @@ static struct resource msm_iommu_rot_resources[] = {
static struct resource msm_iommu_ijpeg_resources[] = {
{
- .start = MSM_IOMMU_IJPEG_PHYS,
- .end = MSM_IOMMU_IJPEG_PHYS + MSM_IOMMU_IJPEG_SIZE - 1,
+ .start = 0x07800000,
+ .end = 0x07800000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -151,8 +149,8 @@ static struct resource msm_iommu_ijpeg_resources[] = {
static struct resource msm_iommu_vfe_resources[] = {
{
- .start = MSM_IOMMU_VFE_PHYS,
- .end = MSM_IOMMU_VFE_PHYS + MSM_IOMMU_VFE_SIZE - 1,
+ .start = 0x07900000,
+ .end = 0x07900000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -172,8 +170,8 @@ static struct resource msm_iommu_vfe_resources[] = {
static struct resource msm_iommu_vcodec_a_resources[] = {
{
- .start = MSM_IOMMU_VCODEC_A_PHYS,
- .end = MSM_IOMMU_VCODEC_A_PHYS + MSM_IOMMU_VCODEC_A_SIZE - 1,
+ .start = 0x07A00000,
+ .end = 0x07A00000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -193,8 +191,8 @@ static struct resource msm_iommu_vcodec_a_resources[] = {
static struct resource msm_iommu_vcodec_b_resources[] = {
{
- .start = MSM_IOMMU_VCODEC_B_PHYS,
- .end = MSM_IOMMU_VCODEC_B_PHYS + MSM_IOMMU_VCODEC_B_SIZE - 1,
+ .start = 0x07B00000,
+ .end = 0x07B00000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -214,8 +212,8 @@ static struct resource msm_iommu_vcodec_b_resources[] = {
static struct resource msm_iommu_gfx3d_resources[] = {
{
- .start = MSM_IOMMU_GFX3D_PHYS,
- .end = MSM_IOMMU_GFX3D_PHYS + MSM_IOMMU_GFX3D_SIZE - 1,
+ .start = 0x07C00000,
+ .end = 0x07C00000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -235,8 +233,8 @@ static struct resource msm_iommu_gfx3d_resources[] = {
static struct resource msm_iommu_gfx2d0_resources[] = {
{
- .start = MSM_IOMMU_GFX2D0_PHYS,
- .end = MSM_IOMMU_GFX2D0_PHYS + MSM_IOMMU_GFX2D0_SIZE - 1,
+ .start = 0x07D00000,
+ .end = 0x07D00000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
@@ -256,8 +254,8 @@ static struct resource msm_iommu_gfx2d0_resources[] = {
static struct resource msm_iommu_gfx2d1_resources[] = {
{
- .start = MSM_IOMMU_GFX2D1_PHYS,
- .end = MSM_IOMMU_GFX2D1_PHYS + MSM_IOMMU_GFX2D1_SIZE - 1,
+ .start = 0x07E00000,
+ .end = 0x07E00000 + SZ_1M - 1,
.name = "physbase",
.flags = IORESOURCE_MEM,
},
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
index 5bd18db..3b19b8f 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -62,40 +62,4 @@
#define MSM8X60_TMR0_PHYS 0x02040000
#define MSM8X60_TMR0_SIZE SZ_4K
-#define MSM_IOMMU_JPEGD_PHYS 0x07300000
-#define MSM_IOMMU_JPEGD_SIZE SZ_1M
-
-#define MSM_IOMMU_VPE_PHYS 0x07400000
-#define MSM_IOMMU_VPE_SIZE SZ_1M
-
-#define MSM_IOMMU_MDP0_PHYS 0x07500000
-#define MSM_IOMMU_MDP0_SIZE SZ_1M
-
-#define MSM_IOMMU_MDP1_PHYS 0x07600000
-#define MSM_IOMMU_MDP1_SIZE SZ_1M
-
-#define MSM_IOMMU_ROT_PHYS 0x07700000
-#define MSM_IOMMU_ROT_SIZE SZ_1M
-
-#define MSM_IOMMU_IJPEG_PHYS 0x07800000
-#define MSM_IOMMU_IJPEG_SIZE SZ_1M
-
-#define MSM_IOMMU_VFE_PHYS 0x07900000
-#define MSM_IOMMU_VFE_SIZE SZ_1M
-
-#define MSM_IOMMU_VCODEC_A_PHYS 0x07A00000
-#define MSM_IOMMU_VCODEC_A_SIZE SZ_1M
-
-#define MSM_IOMMU_VCODEC_B_PHYS 0x07B00000
-#define MSM_IOMMU_VCODEC_B_SIZE SZ_1M
-
-#define MSM_IOMMU_GFX3D_PHYS 0x07C00000
-#define MSM_IOMMU_GFX3D_SIZE SZ_1M
-
-#define MSM_IOMMU_GFX2D0_PHYS 0x07D00000
-#define MSM_IOMMU_GFX2D0_SIZE SZ_1M
-
-#define MSM_IOMMU_GFX2D1_PHYS 0x07E00000
-#define MSM_IOMMU_GFX2D1_SIZE SZ_1M
-
#endif
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-02-11 20:28 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-11 20:28 [PATCH 1/3] msm: iommu: Create a Kconfig item for the IOMMU driver Stepan Moskovchenko
2011-02-11 20:28 ` Stepan Moskovchenko [this message]
2011-02-11 20:42 ` [PATCH 2/3] msm: iommu: Generalize platform data for multiple targets Daniel Walker
2011-02-11 20:51 ` Steve Muckle
2011-02-11 20:58 ` Daniel Walker
2011-02-11 21:00 ` Steve Muckle
2011-02-11 21:03 ` Daniel Walker
2011-02-11 21:03 ` David Brown
2011-02-11 21:14 ` Daniel Walker
2011-02-11 21:53 ` David Brown
2011-02-11 22:00 ` Daniel Walker
2011-02-11 22:12 ` Daniel Walker
2011-02-11 22:37 ` David Brown
2011-02-11 22:47 ` Daniel Walker
2011-02-11 23:16 ` David Brown
2011-02-11 23:35 ` Daniel Walker
2011-02-11 20:28 ` [PATCH 3/3] msm: iommu: Enable IOMMU support for MSM8960 Stepan Moskovchenko
2011-02-11 20:38 ` [PATCH 1/3] msm: iommu: Create a Kconfig item for the IOMMU driver Daniel Walker
2011-02-15 19:35 ` David Brown
2011-02-15 19:49 ` Daniel Walker
2011-02-25 0:12 ` David Brown
2011-02-16 0:36 ` Daniel Walker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297456098-3241-2-git-send-email-stepanm@codeaurora.org \
--to=stepanm@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).