From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] Add i.MX51/53 IPU framebuffer support
Date: Wed, 16 Feb 2011 15:10:45 +0100 [thread overview]
Message-ID: <1297865452-32181-1-git-send-email-s.hauer@pengutronix.de> (raw)
The following is the third version of the series adding ipu support
for the i.MX51/53.
Changes since last version:
- The IPU core driver now sits in drivers/video instead of drivers/mfd.
It still needs mfd support, so it has a select on MFD_SUPPORT and
MFD_CORE.
- The fb driver does not reallocate memory anymore. This is broken since
there is a risk that some userspace process still has the memory mapped
while we reallocate it which leads to bad results.
Sascha Hauer (7):
Add a mfd IPUv3 driver
fb: export fb mode db table
Add i.MX5 framebuffer driver
ARM i.MX51: Add IPU device support
ARM i.MX5: Allow to increase max zone order
ARM i.MX5: increase dma consistent size for IPU support
ARM i.MX51 babbage: Add framebuffer support
arch/arm/Kconfig | 4 +-
arch/arm/mach-mx5/Kconfig | 1 +
arch/arm/mach-mx5/board-mx51_babbage.c | 74 ++
arch/arm/mach-mx5/devices-imx51.h | 4 +
arch/arm/plat-mxc/devices/Kconfig | 4 +
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-imx_ipuv3.c | 47 ++
arch/arm/plat-mxc/include/mach/devices-common.h | 10 +
arch/arm/plat-mxc/include/mach/ipu-v3.h | 49 ++
arch/arm/plat-mxc/include/mach/memory.h | 3 +-
drivers/video/Kconfig | 13 +
drivers/video/Makefile | 2 +
drivers/video/imx-ipu-v3/Makefile | 3 +
drivers/video/imx-ipu-v3/ipu-common.c | 708 +++++++++++++++++
drivers/video/imx-ipu-v3/ipu-cpmem.c | 612 +++++++++++++++
drivers/video/imx-ipu-v3/ipu-dc.c | 364 +++++++++
drivers/video/imx-ipu-v3/ipu-di.c | 550 ++++++++++++++
drivers/video/imx-ipu-v3/ipu-dmfc.c | 355 +++++++++
drivers/video/imx-ipu-v3/ipu-dp.c | 476 ++++++++++++
drivers/video/imx-ipu-v3/ipu-prv.h | 216 ++++++
drivers/video/modedb.c | 8 +-
drivers/video/mx5fb.c | 925 +++++++++++++++++++++++
include/linux/fb.h | 3 +
include/linux/mfd/imx-ipu-v3.h | 219 ++++++
24 files changed, 4646 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/plat-mxc/devices/platform-imx_ipuv3.c
create mode 100644 arch/arm/plat-mxc/include/mach/ipu-v3.h
create mode 100644 drivers/video/imx-ipu-v3/Makefile
create mode 100644 drivers/video/imx-ipu-v3/ipu-common.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-cpmem.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-dc.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-di.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-dmfc.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-dp.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-prv.h
create mode 100644 drivers/video/mx5fb.c
create mode 100644 include/linux/mfd/imx-ipu-v3.h
next reply other threads:[~2011-02-16 14:10 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-16 14:10 Sascha Hauer [this message]
2011-02-16 14:10 ` [PATCH 1/7] Add a mfd IPUv3 driver Sascha Hauer
2011-02-17 18:10 ` Arnaud Patard (Rtp)
2011-02-18 9:49 ` Sascha Hauer
2011-02-18 12:07 ` Samuel Ortiz
2011-02-21 5:38 ` Jason Chen
2011-02-16 14:10 ` [PATCH 2/7] fb: export fb mode db table Sascha Hauer
2011-02-16 14:10 ` [PATCH 3/7] Add i.MX5 framebuffer driver Sascha Hauer
2011-02-18 9:22 ` Jason Chen
2011-02-18 9:52 ` Sascha Hauer
2011-02-19 2:22 ` Jason Chen
2011-02-16 14:10 ` [PATCH 4/7] ARM i.MX51: Add IPU device support Sascha Hauer
2011-02-16 14:10 ` [PATCH 5/7] ARM i.MX5: Allow to increase max zone order Sascha Hauer
2011-02-16 14:10 ` [PATCH 6/7] ARM i.MX5: increase dma consistent size for IPU support Sascha Hauer
2011-02-16 14:10 ` [PATCH 7/7] ARM i.MX51 babbage: Add framebuffer support Sascha Hauer
2011-02-17 18:11 ` Arnaud Patard (Rtp)
2011-02-18 9:47 ` Sascha Hauer
2011-02-23 16:48 ` [PATCH v3] Add i.MX51/53 IPU " Eric Benard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297865452-32181-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).