[PATCH 7/7] ARM i.MX51 babbage: Add framebuffer support

[s.hauer@pengutronix.de (Sascha Hauer)]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/Kconfig              |    1 +
 arch/arm/mach-mx5/board-mx51_babbage.c |   74 ++++++++++++++++++++++++++++++++
 2 files changed, 75 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index de4fa992f..89e71da 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -42,6 +42,7 @@ config MACH_MX51_BABBAGE
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select IMX_HAVE_PLATFORM_IMX_IPUV3
 	help
 	  Include support for MX51 Babbage platform, also known as MX51EVK in
 	  u-boot. This includes specific configurations for the board and its
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 1d231e8..c5170e8 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -22,11 +22,13 @@
 #include <linux/input.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
+#include <linux/mfd/imx-ipu-v3.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 #include <mach/mxc_ehci.h>
+#include <mach/ipu-v3.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -158,6 +160,41 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
 	MX51_PAD_CSPI1_SS0__GPIO4_24,
 	MX51_PAD_CSPI1_SS1__GPIO4_25,
+
+	/* Display */
+	MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
+	MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
+	MX51_PAD_NANDF_D12__GPIO3_28,
+
+	MX51_PAD_DISP1_DAT0__DISP1_DAT0,
+	MX51_PAD_DISP1_DAT1__DISP1_DAT1,
+	MX51_PAD_DISP1_DAT2__DISP1_DAT2,
+	MX51_PAD_DISP1_DAT3__DISP1_DAT3,
+	MX51_PAD_DISP1_DAT4__DISP1_DAT4,
+	MX51_PAD_DISP1_DAT5__DISP1_DAT5,
+	MX51_PAD_DISP1_DAT6__DISP1_DAT6,
+	MX51_PAD_DISP1_DAT7__DISP1_DAT7,
+	MX51_PAD_DISP1_DAT8__DISP1_DAT8,
+	MX51_PAD_DISP1_DAT9__DISP1_DAT9,
+	MX51_PAD_DISP1_DAT10__DISP1_DAT10,
+	MX51_PAD_DISP1_DAT11__DISP1_DAT11,
+	MX51_PAD_DISP1_DAT12__DISP1_DAT12,
+	MX51_PAD_DISP1_DAT13__DISP1_DAT13,
+	MX51_PAD_DISP1_DAT14__DISP1_DAT14,
+	MX51_PAD_DISP1_DAT15__DISP1_DAT15,
+	MX51_PAD_DISP1_DAT16__DISP1_DAT16,
+	MX51_PAD_DISP1_DAT17__DISP1_DAT17,
+	MX51_PAD_DISP1_DAT18__DISP1_DAT18,
+	MX51_PAD_DISP1_DAT19__DISP1_DAT19,
+	MX51_PAD_DISP1_DAT20__DISP1_DAT20,
+	MX51_PAD_DISP1_DAT21__DISP1_DAT21,
+	MX51_PAD_DISP1_DAT22__DISP1_DAT22,
+	MX51_PAD_DISP1_DAT23__DISP1_DAT23,
+#define MX51_PAD_DI_GP4__IPU_DI2_PIN15                 IOMUX_PAD(0x758, 0x350, 4, 0x0,   0, NO_PAD_CTRL)
+	MX51_PAD_DI_GP4__IPU_DI2_PIN15,
+
+	/* I2C DVI enable */
+	MX51_PAD_CSI2_HSYNC__GPIO4_14,
 };
 
 /* Serial ports */
@@ -346,6 +383,23 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
 	.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
 };
 
+static struct ipuv3_fb_platform_data babbage_fb0_data = {
+	.interface_pix_fmt = IPU_PIX_FMT_RGB24,
+	.flags = IMX_IPU_FB_USE_MODEDB | IMX_IPU_FB_USE_OVERLAY,
+	.display = 0,
+};
+
+static struct ipuv3_fb_platform_data babbage_fb1_data = {
+	.interface_pix_fmt = IPU_PIX_FMT_RGB565,
+	.flags = IMX_IPU_FB_USE_MODEDB,
+	.display = 1,
+};
+
+static struct imx_ipuv3_platform_data ipu_data = {
+	.fb_head0_platform_data = &babbage_fb0_data,
+	.fb_head1_platform_data = &babbage_fb1_data,
+};
+
 /*
  * Board specific initialization.
  */
@@ -392,6 +446,26 @@ static void __init mxc_board_init(void)
 		ARRAY_SIZE(mx51_babbage_spi_board_info));
 	imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
 	imx51_add_imx2_wdt(0, NULL);
+
+#define GPIO_DVI_DETECT	(2 * 32 + 28)
+#define GPIO_DVI_RESET	(2 * 32 + 5)
+#define GPIO_DVI_PWRDN	(2 * 32 + 6)
+#define GPIO_DVI_I2C	(3 * 32 + 14)
+
+	/* DVI Detect */
+	gpio_request(GPIO_DVI_DETECT, "dvi detect");
+	gpio_direction_input(GPIO_DVI_DETECT);
+	/* DVI Reset - Assert for i2c disabled mode */
+	gpio_request(GPIO_DVI_RESET, "dvi reset");
+	gpio_direction_output(GPIO_DVI_RESET, 0);
+	/* DVI Power-down */
+	gpio_request(GPIO_DVI_PWRDN, "dvi pwdn");
+	gpio_direction_output(GPIO_DVI_PWRDN, 1);
+
+	gpio_request(GPIO_DVI_I2C, "dvi i2c");
+	gpio_direction_output(GPIO_DVI_I2C, 0);
+
+	imx51_add_ipuv3(&ipu_data);
 }
 
 static void __init mx51_babbage_timer_init(void)
-- 
1.7.2.3