From: ccross@android.com (Colin Cross)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 18/21] ARM: tegra: cpufreq: Adjust memory frequency with cpu frequency
Date: Sat, 19 Feb 2011 14:26:07 -0800 [thread overview]
Message-ID: <1298154371-5641-20-git-send-email-ccross@android.com> (raw)
In-Reply-To: <1298154371-5641-1-git-send-email-ccross@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
---
arch/arm/mach-tegra/cpu-tegra.c | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index f02ba60..0e1016a 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -51,6 +51,7 @@ static struct cpufreq_frequency_table freq_table[] = {
#define NUM_CPUS 2
static struct clk *cpu_clk;
+static struct clk *emc_clk;
static unsigned long target_cpu_speed[NUM_CPUS];
static DEFINE_MUTEX(tegra_cpu_lock);
@@ -83,6 +84,17 @@ static int tegra_update_cpu_speed(unsigned long rate)
if (freqs.old == freqs.new)
return ret;
+ /*
+ * Vote on memory bus frequency based on cpu frequency
+ * This sets the minimum frequency, display or avp may request higher
+ */
+ if (rate >= 816000)
+ clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */
+ else if (rate >= 456000)
+ clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */
+ else
+ clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */
+
for_each_online_cpu(freqs.cpu)
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
@@ -173,6 +185,13 @@ static int tegra_cpu_init(struct cpufreq_policy *policy)
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
+ emc_clk = clk_get_sys("cpu", "emc");
+ if (IS_ERR(emc_clk)) {
+ clk_put(cpu_clk);
+ return PTR_ERR(emc_clk);
+ }
+
+ clk_enable(emc_clk);
clk_enable(cpu_clk);
cpufreq_frequency_table_cpuinfo(policy, freq_table);
@@ -195,6 +214,8 @@ static int tegra_cpu_init(struct cpufreq_policy *policy)
static int tegra_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ clk_disable(emc_clk);
+ clk_put(emc_clk);
clk_put(cpu_clk);
return 0;
}
--
1.7.3.1
next prev parent reply other threads:[~2011-02-19 22:26 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-19 22:25 [PATCH v2 12/21] ARM: tegra: clock: Add shared bus clock type Colin Cross
2011-02-19 22:25 ` [PATCH v2 00/21] Tegra clock updates for 2.6.39 Colin Cross
2011-02-19 22:25 ` [PATCH v2 01/21] ARM: tegra: clock: enable clk reset for non-peripheral clocks Colin Cross
2011-02-21 4:05 ` Olof Johansson
2011-02-19 22:25 ` [PATCH v2 02/21] ARM: tegra: clock: Don't BUG on changing an enabled PLL Colin Cross
2011-02-21 4:06 ` Olof Johansson
2011-02-21 6:46 ` Colin Cross
2011-02-19 22:25 ` [PATCH v2 03/21] ARM: tegra: clock: Drop debugging Colin Cross
2011-02-21 4:07 ` Olof Johansson
2011-02-21 6:56 ` Colin Cross
2011-02-19 22:25 ` [PATCH v2 04/21] ARM: tegra: clock: Don't use PLL lock bits Colin Cross
2011-02-21 4:07 ` Olof Johansson
2011-02-19 22:25 ` [PATCH v2 05/21] ARM: tegra: clock: Disable clocks left on by bootloader Colin Cross
2011-02-21 0:40 ` Olof Johansson
2011-02-21 3:43 ` Colin Cross
2011-02-21 4:03 ` Olof Johansson
2011-02-19 22:25 ` [PATCH v2 06/21] ARM: tegra: clock: Initialize clocks that have no enable Colin Cross
2011-02-21 4:08 ` Olof Johansson
2011-02-19 22:25 ` [PATCH v2 07/21] ARM: tegra: clock: Drop CPU dvfs Colin Cross
2011-02-21 4:09 ` Olof Johansson
2011-02-19 22:25 ` [PATCH v2 08/21] ARM: tegra: clock: Rearrange static clock tables Colin Cross
2011-02-21 4:09 ` Olof Johansson
2011-02-19 22:25 ` [PATCH v2 09/21] ARM: tegra: clock: Move unshared clk struct members into union Colin Cross
2011-02-21 4:10 ` Olof Johansson
2011-02-21 7:00 ` Colin Cross
2011-02-19 22:25 ` [PATCH v2 10/21] ARM: tegra: clock: Convert global lock to a lock per clock Colin Cross
2011-02-21 4:11 ` Olof Johansson
2011-02-19 22:26 ` [PATCH v2 11/21] ARM: tegra: cpufreq: Take an extra reference to pllx Colin Cross
2011-02-21 4:12 ` Olof Johansson
2011-02-19 22:26 ` [PATCH v2 12/21] ARM: tegra: clock: Add shared bus clock type Colin Cross
2011-02-19 22:26 ` [PATCH v2 13/21] ARM: tegra: clock: Remove unnecessary uses of #ifdef CONFIG_DEBUG_FS Colin Cross
2011-02-21 4:17 ` Olof Johansson
2011-02-19 22:26 ` [PATCH v2 14/21] ARM: tegra: clock: Refcount periph clock enables Colin Cross
2011-02-21 4:18 ` Olof Johansson
2011-02-21 7:06 ` Colin Cross
2011-02-19 22:26 ` [PATCH v2 15/21] ARM: tegra: clock: Round rate before setting rate Colin Cross
2011-02-21 4:19 ` Olof Johansson
2011-02-21 7:52 ` Colin Cross
2011-02-19 22:26 ` [PATCH v2 16/21] ARM: tegra: Add external memory controller driver Colin Cross
2011-02-21 4:20 ` Olof Johansson
2011-02-19 22:26 ` [PATCH v2 17/21] ARM: tegra: clocks: Add emc scaling Colin Cross
2011-02-21 4:21 ` Olof Johansson
2011-02-19 22:26 ` Colin Cross [this message]
2011-02-21 4:23 ` [PATCH v2 18/21] ARM: tegra: cpufreq: Adjust memory frequency with cpu frequency Olof Johansson
2011-02-19 22:26 ` [PATCH v2 19/21] ARM: tegra: clock: Add function to set SDMMC tap delay Colin Cross
2011-02-21 4:26 ` Olof Johansson
2011-02-19 22:26 ` [PATCH v2 20/21] ARM: tegra: clock: Fix clock issues in suspend Colin Cross
2011-02-21 4:28 ` Olof Johansson
2011-02-19 22:26 ` [PATCH v2 21/21] ARM: tegra: clock: Miscellaneous clock updates Colin Cross
2011-02-21 4:28 ` Olof Johansson
2011-02-21 4:15 ` [PATCH v2 12/21] ARM: tegra: clock: Add shared bus clock type Olof Johansson
2011-02-21 7:02 ` Colin Cross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1298154371-5641-20-git-send-email-ccross@android.com \
--to=ccross@android.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).