From: shawn.guo@freescale.com (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/6] ARM: mxs: dynamically allocate mmc device
Date: Mon, 21 Feb 2011 18:42:56 +0800 [thread overview]
Message-ID: <1298284979-14853-4-git-send-email-shawn.guo@freescale.com> (raw)
In-Reply-To: <1298284979-14853-1-git-send-email-shawn.guo@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
---
arch/arm/mach-mxs/clock-mx23.c | 16 +++++
arch/arm/mach-mxs/clock-mx28.c | 18 +++++
arch/arm/mach-mxs/devices-mx23.h | 4 +
arch/arm/mach-mxs/devices-mx28.h | 4 +
arch/arm/mach-mxs/devices/Kconfig | 3 +
arch/arm/mach-mxs/devices/Makefile | 1 +
arch/arm/mach-mxs/devices/platform-mmc.c | 77 +++++++++++++++++++++++
arch/arm/mach-mxs/include/mach/devices-common.h | 13 ++++
8 files changed, 136 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-mxs/devices/platform-mmc.c
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index c19b69a..a1ed5f4 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -445,6 +445,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("rtc", NULL, rtc_clk)
_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+ _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk)
_REGISTER_CLOCK(NULL, "usb", usb_clk)
_REGISTER_CLOCK(NULL, "audio", audio_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
@@ -515,6 +516,15 @@ static int clk_misc_init(void)
__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
+ /*
+ * 480 MHz seems too high to be ssp clock source directly,
+ * so set frac to get a 288 MHz ref_io.
+ */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+ reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
+ reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+
return 0;
}
@@ -522,6 +532,12 @@ int __init mx23_clocks_init(void)
{
clk_misc_init();
+ /*
+ * source ssp clock from ref_io than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ clk_set_parent(&ssp_clk, &ref_io_clk);
+
clk_enable(&cpu_clk);
clk_enable(&hbus_clk);
clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 9f4ee36..aeb7b2c 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -619,6 +619,8 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("pll2", NULL, pll2_clk)
_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+ _REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
+ _REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
@@ -730,6 +732,15 @@ static int clk_misc_init(void)
reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ /*
+ * 480 MHz seems too high to be ssp clock source directly,
+ * so set frac0 to get a 288 MHz ref_io0.
+ */
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+ reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
+ reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+
return 0;
}
@@ -737,6 +748,13 @@ int __init mx28_clocks_init(void)
{
clk_misc_init();
+ /*
+ * source ssp clock from ref_io0 than ref_xtal,
+ * as ref_xtal only provides 24 MHz as maximum.
+ */
+ clk_set_parent(&ssp0_clk, &ref_io0_clk);
+ clk_set_parent(&ssp1_clk, &ref_io0_clk);
+
clk_enable(&cpu_clk);
clk_enable(&hbus_clk);
clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index 1256788..4419390 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -14,3 +14,7 @@
extern const struct amba_device mx23_duart_device __initconst;
#define mx23_add_duart() \
mxs_add_duart(&mx23_duart_device)
+
+extern const struct mxs_mmc_data mx23_mmc_data[] __initconst;
+#define mx23_add_mmc(id, pdata) \
+ mxs_add_mmc(&mx23_mmc_data[id], pdata)
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 3b18304..540639d 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -32,3 +32,7 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
+
+extern const struct mxs_mmc_data mx28_mmc_data[] __initconst;
+#define mx28_add_mmc(id, pdata) \
+ mxs_add_mmc(&mx28_mmc_data[id], pdata)
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index 6c65b67..49307f8 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -11,3 +11,6 @@ config MXS_HAVE_PLATFORM_FEC
config MXS_HAVE_PLATFORM_FLEXCAN
select HAVE_CAN_FLEXCAN if CAN
bool
+
+config MXS_HAVE_PLATFORM_MMC
+ bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index ca7acc4..c0dacfd 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
obj-y += platform-dma.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MMC) += platform-mmc.o
diff --git a/arch/arm/mach-mxs/devices/platform-mmc.c b/arch/arm/mach-mxs/devices/platform-mmc.c
new file mode 100644
index 0000000..868def1
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mmc.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_mmc_data_entry_single(soc, _id, hwid) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \
+ .dma = soc ## _DMA_SSP ## hwid, \
+ .irq_err = soc ## _INT_SSP ## hwid ## _ERROR, \
+ .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \
+ }
+
+#define mxs_mmc_data_entry(soc, _id, hwid) \
+ [_id] = mxs_mmc_data_entry_single(soc, _id, hwid)
+
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_mmc_data mx23_mmc_data[] __initconst = {
+#define mx23_mmc_data_entry(_id, hwid) \
+ mxs_mmc_data_entry(MX23, _id, hwid)
+ mx23_mmc_data_entry(0, 1),
+ mx23_mmc_data_entry(1, 2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_mmc_data mx28_mmc_data[] __initconst = {
+#define mx28_mmc_data_entry(_id) \
+ mxs_mmc_data_entry(MX28, _id, _id)
+ mx28_mmc_data_entry(0),
+ mx28_mmc_data_entry(1),
+};
+#endif
+
+struct platform_device *__init mxs_add_mmc(
+ const struct mxs_mmc_data *data,
+ const struct mxs_mmc_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->dma,
+ .end = data->dma,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = data->irq_err,
+ .end = data->irq_err,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq_dma,
+ .end = data->irq_dma,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("mxs-mmc", data->id,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index e7aefb4..54710c5 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -63,3 +63,16 @@ struct mxs_flexcan_data {
struct platform_device *__init mxs_add_flexcan(
const struct mxs_flexcan_data *data,
const struct flexcan_platform_data *pdata);
+
+/* mmc */
+#include <mach/mmc.h>
+struct mxs_mmc_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t dma;
+ resource_size_t irq_err;
+ resource_size_t irq_dma;
+};
+struct platform_device *__init mxs_add_mmc(
+ const struct mxs_mmc_data *data,
+ const struct mxs_mmc_platform_data *pdata);
--
1.7.1
next prev parent reply other threads:[~2011-02-21 10:42 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-21 10:42 [PATCH v3] Add mmc device for i.MX23/28 Shawn Guo
2011-02-21 10:42 ` [PATCH v3 1/6] ARM: mxs/clock: fix base address missing in name##_set_parent Shawn Guo
2011-02-21 10:42 ` [PATCH v3 2/6] ARM: mxs: make ssp error irq definition consistent Shawn Guo
2011-02-22 8:20 ` Uwe Kleine-König
2011-02-21 10:42 ` Shawn Guo [this message]
2011-02-22 8:31 ` [PATCH v3 3/6] ARM: mxs: dynamically allocate mmc device Uwe Kleine-König
2011-02-22 12:39 ` Shawn Guo
2011-02-22 18:33 ` Uwe Kleine-König
2011-03-16 10:31 ` [PATCH v4 " Uwe Kleine-König
2011-02-21 10:42 ` [PATCH v3 4/6] ARM: mxs: fix typo "GPO" in iomux-mx23.h Shawn Guo
2011-02-25 20:55 ` Uwe Kleine-König
2011-02-21 10:42 ` [PATCH v3 5/6] ARM: mxs/mx23evk: add mmc device Shawn Guo
2011-02-21 17:42 ` Wolfram Sang
2011-02-22 8:33 ` Uwe Kleine-König
2011-02-22 12:22 ` Shawn Guo
2011-02-22 8:49 ` [PATCH v4] " Shawn Guo
2011-02-22 10:35 ` Wolfram Sang
2011-02-21 10:42 ` [PATCH v3 6/6] ARM: mxs/mx28evk: " Shawn Guo
2011-02-22 8:50 ` [PATCH v4] " Shawn Guo
2011-02-22 10:35 ` Wolfram Sang
2011-03-25 11:46 ` mx28 sdio problems (was: Re: [PATCH v4] ARM: mxs/mx28evk: add mmc device) Marc Kleine-Budde
2011-03-26 14:13 ` Shawn Guo
2011-03-29 10:05 ` mx28 sdio problems Marc Kleine-Budde
2011-02-21 17:40 ` [PATCH v3] Add mmc device for i.MX23/28 Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1298284979-14853-4-git-send-email-shawn.guo@freescale.com \
--to=shawn.guo@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).