linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: w.sang@pengutronix.de (Wolfram Sang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO
Date: Wed, 23 Feb 2011 14:51:54 +0100	[thread overview]
Message-ID: <1298469118-25282-2-git-send-email-w.sang@pengutronix.de> (raw)
In-Reply-To: <1298469118-25282-1-git-send-email-w.sang@pengutronix.de>

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Marc Reilly <marc@cpdesign.com.au>
Tested-by: Eric Benard <eric@eukrea.com>
---

change since last version:

* improve kerneldoc

 arch/arm/plat-mxc/include/mach/esdhc.h |   10 +++++-
 drivers/mmc/host/sdhci-esdhc-imx.c     |   52 +++++++++++++++++++++++++-------
 2 files changed, 50 insertions(+), 12 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h
index a48a9aa..47da109 100644
--- a/arch/arm/plat-mxc/include/mach/esdhc.h
+++ b/arch/arm/plat-mxc/include/mach/esdhc.h
@@ -10,7 +10,15 @@
 #ifndef __ASM_ARCH_IMX_ESDHC_H
 #define __ASM_ARCH_IMX_ESDHC_H
 
+/**
+ * struct esdhc_platform_data - optional platform data for esdhc on i.MX
+ *
+ * strongly recommended for i.MX25/35, not needed for other variants
+ *
+ * @wp_gpio:	gpio for write_protect (-EINVAL if unused)
+ */
+
 struct esdhc_platform_data {
-	unsigned int wp_gpio;	/* write protect pin */
+	unsigned int wp_gpio;
 };
 #endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 9b82910..65df00b 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -15,9 +15,11 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-pltfm.h>
 #include <mach/hardware.h>
+#include <mach/esdhc.h>
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -100,10 +102,31 @@ static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
 	return clk_get_rate(pltfm_host->clk) / 256 / 16;
 }
 
+static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
+{
+	struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
+
+	if (boarddata && gpio_is_valid(boarddata->wp_gpio))
+		return gpio_get_value(boarddata->wp_gpio);
+	else
+		return -ENOSYS;
+}
+
+static struct sdhci_ops sdhci_esdhc_ops = {
+	.read_w = esdhc_readw_le,
+	.write_w = esdhc_writew_le,
+	.write_b = esdhc_writeb_le,
+	.set_clock = esdhc_set_clock,
+	.get_max_clock = esdhc_pltfm_get_max_clock,
+	.get_min_clock = esdhc_pltfm_get_min_clock,
+};
+
 static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pdata)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
 	struct clk *clk;
+	int err;
 
 	clk = clk_get(mmc_dev(host->mmc), NULL);
 	if (IS_ERR(clk)) {
@@ -116,9 +139,21 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd
 	if (cpu_is_mx35() || cpu_is_mx51())
 		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
-	/* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */
-	if (cpu_is_mx25() || cpu_is_mx35())
+	if (cpu_is_mx25() || cpu_is_mx35()) {
+		/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
 		host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+		/* write_protect can't be routed to controller, use gpio */
+		sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro;
+	}
+
+	if (boarddata) {
+		err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
+		if (err) {
+			dev_warn(mmc_dev(host->mmc),
+				"no write-protect pin available!\n");
+			boarddata->wp_gpio = err;
+		}
+	}
 
 	return 0;
 }
@@ -126,20 +161,15 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd
 static void esdhc_pltfm_exit(struct sdhci_host *host)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
+
+	if (boarddata && gpio_is_valid(boarddata->wp_gpio))
+		gpio_free(boarddata->wp_gpio);
 
 	clk_disable(pltfm_host->clk);
 	clk_put(pltfm_host->clk);
 }
 
-static struct sdhci_ops sdhci_esdhc_ops = {
-	.read_w = esdhc_readw_le,
-	.write_w = esdhc_writew_le,
-	.write_b = esdhc_writeb_le,
-	.set_clock = esdhc_set_clock,
-	.get_max_clock = esdhc_pltfm_get_max_clock,
-	.get_min_clock = esdhc_pltfm_get_min_clock,
-};
-
 struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
 	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA,
 	/* ADMA has issues. Might be fixable */
-- 
1.7.2.3

  reply	other threads:[~2011-02-23 13:51 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-23 13:51 [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection Wolfram Sang
2011-02-23 13:51 ` Wolfram Sang [this message]
2011-02-23 13:51 ` [PATCH 2/5] mmc: sdhci-esdhc: broken card detection is not a default quirk Wolfram Sang
2011-02-23 13:51 ` [PATCH 3/5] mmc: sdhci-esdhc-imx: add card detect on custom GPIO Wolfram Sang
2011-02-23 13:51 ` [PATCH 4/5] arm: mach-mx3: pcm043: add write-protect and card-detect for SD1 Wolfram Sang
2011-02-23 13:51 ` [PATCH 5/5] arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded values Wolfram Sang
2011-02-24  8:18 ` [PATCH V3 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection Shawn Guo
2011-02-24 15:51   ` Shawn Guo
2011-02-24 16:03     ` Shawn Guo
2011-02-24 19:45       ` Wolfram Sang
2011-02-24 11:40 ` Arnaud Patard (Rtp)
2011-02-24 13:12   ` Wolfram Sang
2011-02-24 19:00   ` Eric Benard
2011-02-25 19:31     ` Arnaud Patard (Rtp)
2011-02-25 21:29       ` Eric Benard
  -- strict thread matches above, loose matches on Subject: below --
2011-02-22 12:58 [PATCH V2 " Wolfram Sang
2011-02-22 12:58 ` [PATCH 1/5] mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO Wolfram Sang
2011-02-10 19:14 [PATCH 0/5] sdhci-esdhc-imx: use gpio for write protection and card detection Wolfram Sang
2011-02-10 19:14 ` [PATCH 1/5] mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO Wolfram Sang
2011-02-10 22:24   ` Marc Reilly
2011-02-11  9:42     ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1298469118-25282-2-git-send-email-w.sang@pengutronix.de \
    --to=w.sang@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).