From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] i.MX51 Framebuffer support
Date: Mon, 28 Feb 2011 11:00:21 +0100 [thread overview]
Message-ID: <1298887229-7987-1-git-send-email-s.hauer@pengutronix.de> (raw)
Once again, changes since last posting include:
- remove MFD_ prefix from Kconfig names
- move ipu header to include/video
- cleanup babbage framebuffer support
Sascha Hauer (8):
fb: export fb mode db table
ARM i.MX51: setup mipi
Add a mfd IPUv3 driver
Add i.MX5 framebuffer driver
ARM i.MX51: Add IPU device support
ARM i.MX5: Allow to increase max zone order
ARM i.MX5: increase dma consistent size for IPU support
ARM i.MX51 babbage: Add framebuffer support
arch/arm/Kconfig | 4 +-
arch/arm/mach-mx5/Kconfig | 1 +
arch/arm/mach-mx5/board-mx51_babbage.c | 82 ++
arch/arm/mach-mx5/cpu.c | 36 +
arch/arm/mach-mx5/devices-imx51.h | 4 +
arch/arm/plat-mxc/devices/Kconfig | 4 +
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-imx_ipuv3.c | 47 ++
arch/arm/plat-mxc/include/mach/devices-common.h | 10 +
arch/arm/plat-mxc/include/mach/ipu-v3.h | 49 ++
arch/arm/plat-mxc/include/mach/memory.h | 3 +-
drivers/video/Kconfig | 13 +
drivers/video/Makefile | 2 +
drivers/video/imx-ipu-v3/Kconfig | 10 +
drivers/video/imx-ipu-v3/Makefile | 3 +
drivers/video/imx-ipu-v3/ipu-common.c | 666 ++++++++++++++++
drivers/video/imx-ipu-v3/ipu-cpmem.c | 612 +++++++++++++++
drivers/video/imx-ipu-v3/ipu-dc.c | 364 +++++++++
drivers/video/imx-ipu-v3/ipu-di.c | 550 ++++++++++++++
drivers/video/imx-ipu-v3/ipu-dmfc.c | 355 +++++++++
drivers/video/imx-ipu-v3/ipu-dp.c | 476 ++++++++++++
drivers/video/imx-ipu-v3/ipu-prv.h | 216 ++++++
drivers/video/modedb.c | 8 +-
drivers/video/mx5fb.c | 925 +++++++++++++++++++++++
include/linux/fb.h | 3 +
include/video/imx-ipu-v3.h | 219 ++++++
26 files changed, 4658 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/plat-mxc/devices/platform-imx_ipuv3.c
create mode 100644 arch/arm/plat-mxc/include/mach/ipu-v3.h
create mode 100644 drivers/video/imx-ipu-v3/Kconfig
create mode 100644 drivers/video/imx-ipu-v3/Makefile
create mode 100644 drivers/video/imx-ipu-v3/ipu-common.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-cpmem.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-dc.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-di.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-dmfc.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-dp.c
create mode 100644 drivers/video/imx-ipu-v3/ipu-prv.h
create mode 100644 drivers/video/mx5fb.c
create mode 100644 include/video/imx-ipu-v3.h
next reply other threads:[~2011-02-28 10:00 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-28 10:00 Sascha Hauer [this message]
2011-02-28 10:00 ` [PATCH 1/8] fb: export fb mode db table Sascha Hauer
2011-02-28 10:00 ` [PATCH 2/8] ARM i.MX51: setup mipi Sascha Hauer
2011-02-28 10:00 ` [PATCH 3/8] Add a mfd IPUv3 driver Sascha Hauer
2011-02-28 17:11 ` Arnd Bergmann
2011-03-01 9:15 ` Sascha Hauer
2011-03-01 10:27 ` Arnd Bergmann
2011-03-01 11:12 ` Sascha Hauer
2011-03-01 11:43 ` Arnd Bergmann
2011-03-01 14:09 ` Thomas Gleixner
2011-02-28 18:33 ` Thomas Gleixner
2011-03-01 9:39 ` Sascha Hauer
2011-03-01 10:00 ` Thomas Gleixner
2011-03-01 11:31 ` Sascha Hauer
2011-02-28 10:00 ` [PATCH 4/8] Add i.MX5 framebuffer driver Sascha Hauer
2011-02-28 10:00 ` [PATCH 5/8] ARM i.MX51: Add IPU device support Sascha Hauer
2011-02-28 10:00 ` [PATCH 6/8] ARM i.MX5: Allow to increase max zone order Sascha Hauer
2011-02-28 10:04 ` Russell King - ARM Linux
2011-02-28 10:18 ` Sascha Hauer
2011-02-28 10:00 ` [PATCH 7/8] ARM i.MX5: increase dma consistent size for IPU support Sascha Hauer
2011-02-28 10:00 ` [PATCH 8/8] ARM i.MX51 babbage: Add framebuffer support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1298887229-7987-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).