From: w.sang@pengutronix.de (Wolfram Sang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] arm: mxs: add i2c-devices for mx28
Date: Mon, 28 Feb 2011 17:40:04 +0100 [thread overview]
Message-ID: <1298911205-3070-2-git-send-email-w.sang@pengutronix.de> (raw)
In-Reply-To: <1298911205-3070-1-git-send-email-w.sang@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
arch/arm/mach-mxs/devices-mx28.h | 3 +
arch/arm/mach-mxs/devices/Kconfig | 3 +
arch/arm/mach-mxs/devices/Makefile | 1 +
arch/arm/mach-mxs/devices/platform-mxs-i2c.c | 51 +++++++++++++++++++++++
arch/arm/mach-mxs/include/mach/devices-common.h | 9 ++++
5 files changed, 67 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-mxs/devices/platform-mxs-i2c.c
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 69d19ea..a9eecdc 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -33,4 +33,7 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
+extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
+#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
+
#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index 3aeec24..a878915 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -12,5 +12,8 @@ config MXS_HAVE_PLATFORM_FLEXCAN
select HAVE_CAN_FLEXCAN if CAN
bool
+config MXS_HAVE_PLATFORM_MXS_I2C
+ bool
+
config MXS_HAVE_PLATFORM_MXS_PWM
bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index 978310f..345b839 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -2,4 +2,5 @@ obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
new file mode 100644
index 0000000..eab3a06
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2011 Pengutronix
+ * Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_i2c_data_entry_single(soc, _id) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _I2C ## _id ## _BASE_ADDR, \
+ .errirq = soc ## _INT_I2C ## _id ## _ERROR, \
+ .dmairq = soc ## _INT_I2C ## _id ## _DMA, \
+ }
+
+#define mxs_i2c_data_entry(soc, _id) \
+ [_id] = mxs_i2c_data_entry_single(soc, _id)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
+ mxs_i2c_data_entry(MX28, 0),
+ mxs_i2c_data_entry(MX28, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_mxs_i2c(const struct mxs_i2c_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->errirq,
+ .end = data->errirq,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->dmairq,
+ .end = data->dmairq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("mxs-i2c", data->id, res,
+ ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index d460d30..71f2448 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -64,6 +64,15 @@ struct platform_device *__init mxs_add_flexcan(
const struct mxs_flexcan_data *data,
const struct flexcan_platform_data *pdata);
+/* i2c */
+struct mxs_i2c_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t errirq;
+ resource_size_t dmairq;
+};
+struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data);
+
/* pwm */
struct platform_device *__init mxs_add_mxs_pwm(
resource_size_t iobase, int id);
--
1.7.2.3
next prev parent reply other threads:[~2011-02-28 16:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-28 16:40 [PATCH 0/2] mach-mxs: dynamic device creation for i.MX28-i2c Wolfram Sang
2011-02-28 16:40 ` Wolfram Sang [this message]
2011-03-16 20:40 ` [PATCH] ARM: mxs: fix naming of struct holding info for mxs-i2c devices Uwe Kleine-König
2011-02-28 16:40 ` [PATCH 2/2] arm: mxs: tx28: add i2c bus and connected RTC Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1298911205-3070-2-git-send-email-w.sang@pengutronix.de \
--to=w.sang@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).