From: banajit.g@samsung.com (Banajit Goswami)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 4/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5P6450
Date: Wed, 2 Mar 2011 16:27:25 +0900 [thread overview]
Message-ID: <1299050847-16148-3-git-send-email-banajit.g@samsung.com> (raw)
In-Reply-To: <1299050847-16148-1-git-send-email-banajit.g@samsung.com>
This patch adds support for LCD backlight control using PWM timer
for Samsung SMDK6450 board.
Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
---
Changes since v1:
- Used common GPIO macro
- Removed redundant timers
arch/arm/mach-s5p64x0/Kconfig | 1 +
arch/arm/mach-s5p64x0/mach-smdk6450.c | 43 +++++++++++++++++++++++++++++++++
2 files changed, 45 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index be5888a..08b0a5b 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -48,6 +48,7 @@ config MACH_SMDK6450
select S3C_DEV_WDT
select S3C64XX_DEV_SPI
select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
select S5P64X0_SETUP_I2C1
help
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 3a20de0..296cc0f 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -32,6 +33,7 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/i2c.h>
+#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
@@ -106,6 +108,45 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
#endif
};
+static int smdk6450_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(S5P6450_GPF(15), "Backlight");
+ if (ret) {
+ printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
+ return ret;
+ }
+
+ /* Configure GPIO pin with S5P6450_GPF15_PWM_TOUT1 */
+ s3c_gpio_cfgpin(S5P6450_GPF(15), S3C_GPIO_SFN(2));
+
+ return 0;
+}
+
+static void smdk6450_backlight_exit(struct device *dev)
+{
+ s3c_gpio_cfgpin(S5P6450_GPF(15), S3C_GPIO_OUTPUT);
+ gpio_free(S5P6450_GPF(15));
+}
+
+static struct platform_pwm_backlight_data smdk6450_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 255,
+ .dft_brightness = 255,
+ .pwm_period_ns = 78770,
+ .init = smdk6450_backlight_init,
+ .exit = smdk6450_backlight_exit,
+};
+
+static struct platform_device smdk6450_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[1].dev,
+ .platform_data = &smdk6450_backlight_data,
+ },
+};
+
static struct platform_device *smdk6450_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_rtc,
@@ -115,6 +156,8 @@ static struct platform_device *smdk6450_devices[] __initdata = {
&s3c_device_wdt,
&samsung_asoc_dma,
&s5p6450_device_iis0,
+ &s3c_device_timer[1],
+ &smdk6450_backlight_device,
/* s5p6450_device_spi0 will be added */
};
--
1.6.5.2
next prev parent reply other threads:[~2011-03-02 7:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-02 7:27 [PATCH V2 2/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S3C6410 Banajit Goswami
2011-03-02 7:27 ` [PATCH V2 3/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5P6440 Banajit Goswami
2011-03-02 7:27 ` Banajit Goswami [this message]
2011-03-02 7:27 ` [PATCH V2 5/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5PC100 Banajit Goswami
2011-03-02 7:27 ` [PATCH V2 6/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5PV210 Banajit Goswami
2011-03-04 7:29 ` [PATCH V2 2/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S3C6410 Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1299050847-16148-3-git-send-email-banajit.g@samsung.com \
--to=banajit.g@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox