From: u.kleine-koenig@pengutronix.de (Uwe Kleine-König)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2 v2] ARM: mxc91231/iomux: allow pin_list to be const
Date: Wed, 2 Mar 2011 10:59:49 +0100 [thread overview]
Message-ID: <1299059989-16360-2-git-send-email-u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <1299011621-18886-1-git-send-email-u.kleine-koenig@pengutronix.de>
While at it remove some useless consts from unsigned int arguments.
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
arch/arm/mach-mxc91231/iomux.c | 14 +++++++-------
arch/arm/plat-mxc/include/mach/iomux-mxc91231.h | 8 ++++----
2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
index 405d9b1..66fc41c 100644
--- a/arch/arm/mach-mxc91231/iomux.c
+++ b/arch/arm/mach-mxc91231/iomux.c
@@ -50,7 +50,7 @@ unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
/*
* set the mode for a IOMUX pin.
*/
-int mxc_iomux_mode(const unsigned int pin_mode)
+int mxc_iomux_mode(unsigned int pin_mode)
{
u32 side, field, l, mode, ret = 0;
void __iomem *reg;
@@ -114,7 +114,7 @@ EXPORT_SYMBOL(mxc_iomux_set_pad);
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
*/
-int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label)
+int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label)
{
unsigned pad = PIN_GLOBAL_NUM(pin_mode);
if (pad >= (PIN_MAX + 1)) {
@@ -134,10 +134,10 @@ int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label)
}
EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
const char *label)
{
- unsigned int *p = pin_list;
+ const unsigned int *p = pin_list;
int i;
int ret = -EINVAL;
@@ -155,7 +155,7 @@ setup_error:
}
EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-void mxc_iomux_release_pin(const unsigned int pin_mode)
+void mxc_iomux_release_pin(unsigned int pin_mode)
{
unsigned pad = PIN_GLOBAL_NUM(pin_mode);
@@ -164,9 +164,9 @@ void mxc_iomux_release_pin(const unsigned int pin_mode)
}
EXPORT_SYMBOL(mxc_iomux_release_pin);
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
{
- unsigned int *p = pin_list;
+ const unsigned int *p = pin_list;
int i;
for (i = 0; i < count; i++) {
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 15d5951..bf28df0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -46,12 +46,12 @@
* - setups the iomux according to the configuration
* - if the pin is configured as a GPIO, we claim it through kernel gpiolib
*/
-int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
+int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label);
/*
* setups mutliple pins
* convenient way to call the above function with tables
*/
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
const char *label);
/*
@@ -60,12 +60,12 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
* - frees the GPIO if the pin was configured as GPIO
* - DOES NOT reconfigure the IOMUX in its reset state
*/
-void mxc_iomux_release_pin(const unsigned int pin_mode);
+void mxc_iomux_release_pin(unsigned int pin_mode);
/*
* releases multiple pins
* convenvient way to call the above function with tables
*/
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
+void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count);
#define MUX_SIDE_AP (0)
#define MUX_SIDE_SP (1)
--
1.7.2.3
prev parent reply other threads:[~2011-03-02 9:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-01 20:33 [PATCH 1/2] ARM: iomux-imx31: mark pin_list as const Uwe Kleine-König
2011-03-01 20:33 ` [PATCH 2/2] ARM: mxc91231/iomux: " Uwe Kleine-König
2011-03-02 9:59 ` [PATCH 1/2 v2] ARM: iomux-imx31: allow pin_list to be const Uwe Kleine-König
2011-03-02 9:59 ` Uwe Kleine-König [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1299059989-16360-2-git-send-email-u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).