From mboxrd@z Thu Jan 1 00:00:00 1970 From: broonie@opensource.wolfsonmicro.com (Mark Brown) Date: Thu, 3 Mar 2011 14:58:32 +0000 Subject: [PATCH 4/7] ARM: S3C64XX: Tone down SDHCI debugging In-Reply-To: <20110303145710.GA32234@opensource.wolfsonmicro.com> References: <20110303145710.GA32234@opensource.wolfsonmicro.com> Message-ID: <1299164315-22246-4-git-send-email-broonie@opensource.wolfsonmicro.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The MMC core calls s3c6400_setup_sdhcp_cfg_card() very frequently, causing the log message in there at KERN_INFO to be displayed a lot which is slow and overly chatty. Convert the message into a pr_debug() to tone this down. Signed-off-by: Mark Brown --- arch/arm/mach-s3c64xx/setup-sdhci.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c index 1a94203..f344a22 100644 --- a/arch/arm/mach-s3c64xx/setup-sdhci.c +++ b/arch/arm/mach-s3c64xx/setup-sdhci.c @@ -56,7 +56,7 @@ void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, else ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3); + pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3); writel(ctrl2, r + S3C_SDHCI_CONTROL2); writel(ctrl3, r + S3C_SDHCI_CONTROL3); } -- 1.7.2.3