From mboxrd@z Thu Jan 1 00:00:00 1970 From: broonie@opensource.wolfsonmicro.com (Mark Brown) Date: Thu, 3 Mar 2011 14:58:33 +0000 Subject: [PATCH 5/7] ARM: S3C64XX: Reduce output of s3c64xx_dma_init1() In-Reply-To: <20110303145710.GA32234@opensource.wolfsonmicro.com> References: <20110303145710.GA32234@opensource.wolfsonmicro.com> Message-ID: <1299164315-22246-5-git-send-email-broonie@opensource.wolfsonmicro.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Ben Dooks Reduce the logging output of s3c64xx_dma_init1() as it is not useful for normal bootup (and we get an overall indication of the registration of the PL180 DMA block). This removes the following output from the log: s3c64xx_dma_init1: registering DMA 0 (e0808100) s3c64xx_dma_init1: registering DMA 1 (e0808120) s3c64xx_dma_init1: registering DMA 2 (e0808140) s3c64xx_dma_init1: registering DMA 3 (e0808160) s3c64xx_dma_init1: registering DMA 4 (e0808180) s3c64xx_dma_init1: registering DMA 5 (e08081a0) s3c64xx_dma_init1: registering DMA 6 (e08081c0) s3c64xx_dma_init1: registering DMA 7 (e08081e0) Signed-off-by: Ben Dooks Signed-off-by: Mark Brown --- arch/arm/mach-s3c64xx/dma.c | 11 ++++++----- 1 files changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 135db1b..c35585c 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -690,12 +690,12 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, regptr = regs + PL080_Cx_BASE(0); - for (ch = 0; ch < 8; ch++, chno++, chptr++) { - printk(KERN_INFO "%s: registering DMA %d (%p)\n", - __func__, chno, regptr); + for (ch = 0; ch < 8; ch++, chptr++) { + pr_debug("%s: registering DMA %d (%p)\n", + __func__, chno + ch, regptr); chptr->bit = 1 << ch; - chptr->number = chno; + chptr->number = chno + ch; chptr->dmac = dmac; chptr->regs = regptr; regptr += PL080_Cx_STRIDE; @@ -704,7 +704,8 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, /* for the moment, permanently enable the controller */ writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG); - printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs); + printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n", + irq, regs, chno, chno+8); return 0; -- 1.7.2.3