From: Dinh.Nguyen@freescale.com (Dinh.Nguyen at freescale.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 2/2] ARM: mx51: Add support for low power suspend on MX51
Date: Fri, 4 Mar 2011 17:29:59 -0600 [thread overview]
Message-ID: <1299281399-32304-2-git-send-email-Dinh.Nguyen@freescale.com> (raw)
In-Reply-To: <1299281399-32304-1-git-send-email-Dinh.Nguyen@freescale.com>
From: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Adds initial low power suspend functionality to MX51.
Supports "mem" and "standby" modes.
Tested on mx51-babbage.
Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
---
arch/arm/mach-mx5/Makefile | 1 +
arch/arm/mach-mx5/pm-imx51.c | 62 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 63 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-mx5/pm-imx51.c
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 1106acd..2f6258e 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -6,6 +6,7 @@
obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o system.o
obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
+obj-$(CONFIG_PM) += pm-imx51.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
diff --git a/arch/arm/mach-mx5/pm-imx51.c b/arch/arm/mach-mx5/pm-imx51.c
new file mode 100644
index 0000000..6bb76e2
--- /dev/null
+++ b/arch/arm/mach-mx5/pm-imx51.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/suspend.h>
+#include <asm/mach/map.h>
+#include <asm/cacheflush.h>
+#include <asm/tlb.h>
+#include <mach/system.h>
+#include "crm_regs.h"
+
+static int mx5_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ mx5_cpu_lp_set(STOP_POWER_OFF);
+ break;
+ case PM_SUSPEND_STANDBY:
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*clear the EMPGC0/1 bits */
+ __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+ }
+
+ cpu_do_idle();
+
+ return 0;
+}
+
+static int mx5_pm_valid(suspend_state_t state)
+{
+ return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
+}
+
+static const struct platform_suspend_ops mx5_suspend_ops = {
+ .valid = mx5_pm_valid,
+ .enter = mx5_suspend_enter,
+};
+
+static int __init mx5_pm_init(void)
+{
+ if (cpu_is_mx51())
+ suspend_set_ops(&mx5_suspend_ops);
+
+ return 0;
+}
+device_initcall(mx5_pm_init);
--
1.6.0.4
next prev parent reply other threads:[~2011-03-04 23:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-04 23:29 [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Dinh.Nguyen at freescale.com
2011-03-04 23:29 ` Dinh.Nguyen at freescale.com [this message]
2011-03-11 9:16 ` [PATCHv2 2/2] ARM: mx51: Add support for low power suspend on MX51 Arnaud Patard (Rtp)
2011-03-04 23:33 ` [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Nguyen Dinh-R00091
2011-03-05 20:46 ` Arnaud Patard (Rtp)
2011-03-07 15:37 ` Nguyen Dinh-R00091
2011-03-07 16:02 ` Arnaud Patard (Rtp)
2011-03-07 16:35 ` Nguyen Dinh-R00091
2011-03-07 18:07 ` s.hauer at pengutronix.de
2011-03-07 20:01 ` Nguyen Dinh-R00091
2011-03-08 11:40 ` David Jander
2011-03-10 13:37 ` s.hauer at pengutronix.de
2011-03-10 16:06 ` David Jander
2011-03-07 20:29 ` Nguyen Dinh-R00091
2011-03-10 15:12 ` Nguyen Dinh-R00091
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1299281399-32304-2-git-send-email-Dinh.Nguyen@freescale.com \
--to=dinh.nguyen@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).