From mboxrd@z Thu Jan 1 00:00:00 1970 From: nm@ti.com (Nishanth Menon) Date: Sat, 5 Mar 2011 20:59:12 +0530 Subject: [PATCH V3 09/19] OMAP3+: SR: disable interrupt by default In-Reply-To: <1299338962-5602-1-git-send-email-nm@ti.com> References: <1299338962-5602-1-git-send-email-nm@ti.com> Message-ID: <1299338962-5602-10-git-send-email-nm@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org We will enable and disable interrupt on a need basis in the class driver. We need to keep the IRQ disabled by default else the forceupdate or vcbypass events could trigger events that we don't need/expect to handle. This is a preparation for SmartReflex AVS class drivers such as class 2 and class 1.5 which would need to use interrupts. Existing SmartReflex AVS class 3 driver does not require to use interrupts and is not impacted by this change. Signed-off-by: Nishanth Menon --- arch/arm/mach-omap2/smartreflex.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 7096300..f9057ad 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -267,6 +267,7 @@ static int sr_late_init(struct omap_sr *sr_info) 0, name, (void *)sr_info); if (ret) goto error; + disable_irq(sr_info->irq); } if (pdata && pdata->enable_on_init) -- 1.7.1