From mboxrd@z Thu Jan 1 00:00:00 1970 From: mnalajal@codeaurora.org (Murali Nalajala) Date: Tue, 8 Mar 2011 05:38:55 +0530 Subject: [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone. Message-ID: <1299542935-20291-1-git-send-email-mnalajal@codeaurora.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Lets non-standard NAND drivers take advantage of known NAND chip information. The initial development of msm nand driver, driver uses the supported NAND devices information as a hardcoded table. Remove the existing hardcoded supported flash device table and read the flash device information from the flash id table which are part of the mtd subsystem. Signed-off-by: Dima Zavin Signed-off-by: Murali Nalajala --- Changes in V2 * Add more description to the commit text. drivers/mtd/nand/Kconfig | 10 +++++++--- 1 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index c895922..782275e 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1,3 +1,10 @@ +config MTD_NAND_IDS + tristate "Include chip ids for known NAND devices." + depends on MTD + help + Useful for NAND drivers that do not use the NAND subsystem but + still like to take advantage of the known chip information. + config MTD_NAND_ECC tristate @@ -123,9 +130,6 @@ config MTD_NAND_OMAP_PREFETCH_DMA or in DMA interrupt mode. Say y for DMA mode or MPU mode will be used -config MTD_NAND_IDS - tristate - config MTD_NAND_RICOH tristate "Ricoh xD card reader" default n -- 1.7.1.1 -- Sent by a consultant of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.