* [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms
@ 2011-03-10 8:59 Richard Zhu
2011-03-10 8:59 ` [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Richard Zhu
0 siblings, 1 reply; 6+ messages in thread
From: Richard Zhu @ 2011-03-10 8:59 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com>
---
arch/arm/mach-mx5/clock-mx51-mx53.c | 11 +++++
arch/arm/mach-mx5/devices-imx53.h | 4 ++
arch/arm/plat-mxc/devices/Kconfig | 4 ++
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-ahci-imx.c | 55 +++++++++++++++++++++++
arch/arm/plat-mxc/include/mach/ahci_sata.h | 51 +++++++++++++++++++++
arch/arm/plat-mxc/include/mach/devices-common.h | 10 ++++
7 files changed, 136 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c
create mode 100644 arch/arm/plat-mxc/include/mach/ahci_sata.h
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 652ace4..2b3d27c 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1380,6 +1380,14 @@ static struct clk esdhc4_mx53_clk = {
.secondary = &esdhc4_ipg_clk,
};
+static struct clk sata_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_max_enable,
+ .enable_reg = MXC_CCM_CCGR4,
+ .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+ .disable = _clk_max_disable,
+};
+
DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1468,6 +1476,9 @@ static struct clk_lookup mx53_lookups[] = {
_REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
+ _REGISTER_CLOCK(NULL, "imx_sata_clk", sata_clk)
+ _REGISTER_CLOCK(NULL, "usb_phy1", usb_phy1_clk)
+ _REGISTER_CLOCK(NULL, "ahb_clk", ahb_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index 9251008..09ebb43 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -33,3 +33,7 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst;
#define imx53_add_imx2_wdt(id, pdata) \
imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
+
+extern const struct imx_ahci_imx_data imx53_ahci_imx_data[] __initconst;
+#define imx53_add_ahci_imx(id, pdata) \
+ imx_add_ahci_imx(&imx53_ahci_imx_data[id], pdata)
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index b9ab1d5..087595a 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -71,3 +71,7 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
config IMX_HAVE_PLATFORM_SPI_IMX
bool
+
+config IMX_HAVE_PLATFORM_SATA_AHCI
+ bool
+ default y if SOC_IMX53
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index 75cd2ec..e0b7fa3 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SATA_AHCI) += platform-ahci-imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
new file mode 100644
index 0000000..a3ed6f7
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_ahci_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _SATA_BASE_ADDR, \
+ .irq = soc ## _INT_SATA, \
+ }
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
+ imx_ahci_data_entry_single(MX53);
+#endif
+
+struct platform_device *__init imx_add_ahci_imx(
+ const struct imx_ahci_imx_data *data,
+ const struct ahci_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device_dmamask("ahci", 0 /* -1? */,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/include/mach/ahci_sata.h b/arch/arm/plat-mxc/include/mach/ahci_sata.h
new file mode 100644
index 0000000..25df23e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ahci_sata.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __PLAT_MXC_AHCI_SATA_H__
+#define __PLAT_MXC_AHCI_SATA_H__
+
+enum {
+ HOST_CAP = 0x00,
+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_PORTS_IMPL = 0x0c,
+ HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+ /* Offest used to control the MPLL input clk */
+ PHY_CR_CLOCK_FREQ_OVRD = 0x12,
+ /* Port0 SATA Status */
+ PORT_SATA_SR = 0x128,
+ /* Port0 PHY Control */
+ PORT_PHY_CTL = 0x178,
+ /* PORT_PHY_CTL bits */
+ PORT_PHY_CTL_CAP_ADR_LOC = 0x10000,
+ PORT_PHY_CTL_CAP_DAT_LOC = 0x20000,
+ PORT_PHY_CTL_WRITE_LOC = 0x40000,
+ PORT_PHY_CTL_READ_LOC = 0x80000,
+ /* Port0 PHY Status */
+ PORT_PHY_SR = 0x17c,
+ /* PORT_PHY_SR */
+ PORT_PHY_STAT_DATA_LOC = 0,
+ PORT_PHY_STAT_ACK_LOC = 18,
+ /* SATA PHY Register */
+ SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT = 0x0001,
+ SATA_PHY_CR_CLOCK_DAC_CTL = 0x0008,
+ SATA_PHY_CR_CLOCK_RTUNE_CTL = 0x0009,
+ SATA_PHY_CR_CLOCK_ADC_OUT = 0x000A,
+ SATA_PHY_CR_CLOCK_MPLL_TST = 0x0017,
+};
+
+#endif /* __PLAT_MXC_AHCI_SATA_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 8658c9c..81baca6 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -264,3 +264,13 @@ struct imx_spi_imx_data {
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata);
+
+#include <linux/ahci_platform.h>
+struct imx_ahci_imx_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_ahci_imx(
+ const struct imx_ahci_imx_data *data,
+ const struct ahci_platform_data *pdata);
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO
2011-03-10 8:59 [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Richard Zhu
@ 2011-03-10 8:59 ` Richard Zhu
0 siblings, 0 replies; 6+ messages in thread
From: Richard Zhu @ 2011-03-10 8:59 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com>
---
arch/arm/mach-mx5/board-mx53_loco.c | 120 +++++++++++++++++++++++++++++++++++
1 files changed, 120 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 0a18f8d..9a7bbea 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -23,11 +23,13 @@
#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/ahci_platform.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx53.h>
+#include <mach/ahci_sata.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -203,6 +205,123 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
.bitrate = 100000,
};
+/* HW Initialization, if return 0, initialization is successful. */
+static int sata_init(struct device *dev, void __iomem *addr)
+{
+ void __iomem *mmio;
+ struct clk *clk;
+ int ret = 0;
+ u32 tmpdata;
+
+ clk = clk_get(dev, "imx_sata_clk");
+ ret = IS_ERR(clk);
+ if (ret) {
+ printk(KERN_ERR "IMX AHCI can't get clock.\n");
+ return ret;
+ }
+ ret = clk_enable(clk);
+ if (ret) {
+ printk(KERN_ERR "IMX AHCI can't enable clock.\n");
+ clk_put(clk);
+ return ret;
+ }
+
+ /* FSL IMX AHCI SATA uses the internal usb phy1 clk on loco */
+ clk = clk_get(dev, "usb_phy1");
+ ret = IS_ERR(clk);
+ if (ret) {
+ printk(KERN_ERR "IMX AHCI can't get USB PHY1 CLK.\n");
+ goto no_input_clk;
+ }
+ ret = clk_enable(clk);
+ if (ret) {
+ printk(KERN_ERR "IMX AHCI Can't enable USB PHY1 clock.\n");
+ clk_put(clk);
+ goto no_input_clk;
+ }
+
+ /* Get the AHB clock rate, and configure the TIMER1MS reg later */
+ clk = clk_get(NULL, "ahb_clk");
+ ret = IS_ERR(clk);
+ if (ret) {
+ printk(KERN_ERR "IMX AHCI can't get AHB clock.\n");
+ goto no_clk;
+ }
+
+ mmio = ioremap(MX53_SATA_BASE_ADDR, SZ_2K);
+ if (mmio == NULL) {
+ printk(KERN_ERR "Failed to map SATA REGS\n");
+ goto no_clk;
+ }
+
+ tmpdata = readl(mmio + HOST_CAP);
+ if (!(tmpdata & HOST_CAP_SSS)) {
+ tmpdata |= HOST_CAP_SSS;
+ writel(tmpdata, mmio + HOST_CAP);
+ }
+
+ if (!(readl(mmio + HOST_PORTS_IMPL) & 0x1))
+ writel((readl(mmio + HOST_PORTS_IMPL) | 0x1),
+ mmio + HOST_PORTS_IMPL);
+
+ tmpdata = clk_get_rate(clk) / 1000;
+ writel(tmpdata, mmio + HOST_TIMER1MS);
+
+ iounmap(mmio);
+
+ return ret;
+
+no_clk:
+ clk = clk_get(dev, "usb_phy1");
+ if (IS_ERR(clk)) {
+ clk = NULL;
+ printk(KERN_ERR "IMX AHCI can't get USB PHY1 CLK.\n");
+ } else {
+ clk_disable(clk);
+ clk_put(clk);
+ }
+
+no_input_clk:
+ clk = clk_get(dev, "imx_sata_clk");
+ if (IS_ERR(clk)) {
+ clk = NULL;
+ printk(KERN_ERR "IMX AHCI can't get clock.\n");
+ } else {
+ clk_disable(clk);
+ clk_put(clk);
+ }
+
+ return ret;
+}
+
+static void sata_exit(struct device *dev)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, "usb_phy1");
+ if (IS_ERR(clk)) {
+ clk = NULL;
+ printk(KERN_ERR "IMX AHCI can't get USB PHY1 CLK.\n");
+ } else {
+ clk_disable(clk);
+ clk_put(clk);
+ }
+
+ clk = clk_get(dev, "imx_sata_clk");
+ if (IS_ERR(clk)) {
+ clk = NULL;
+ printk(KERN_ERR "IMX AHCI can't get clock.\n");
+ } else {
+ clk_disable(clk);
+ clk_put(clk);
+ }
+}
+
+static struct ahci_platform_data sata_data = {
+ .init = sata_init,
+ .exit = sata_exit,
+};
+
static void __init mx53_loco_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
@@ -215,6 +334,7 @@ static void __init mx53_loco_board_init(void)
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
imx53_add_sdhci_esdhc_imx(0, NULL);
imx53_add_sdhci_esdhc_imx(2, NULL);
+ imx53_add_ahci_imx(0, &sata_data);
}
static void __init mx53_loco_timer_init(void)
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms
@ 2011-03-14 9:55 Richard Zhu
2011-03-14 14:50 ` Jeff Garzik
2011-03-15 9:22 ` Sascha Hauer
0 siblings, 2 replies; 6+ messages in thread
From: Richard Zhu @ 2011-03-14 9:55 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com>
---
arch/arm/mach-mx5/clock-mx51-mx53.c | 11 +++++
arch/arm/mach-mx5/devices-imx53.h | 4 ++
arch/arm/plat-mxc/devices/Kconfig | 4 ++
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-ahci-imx.c | 55 +++++++++++++++++++++++
arch/arm/plat-mxc/include/mach/ahci_sata.h | 51 +++++++++++++++++++++
arch/arm/plat-mxc/include/mach/devices-common.h | 10 ++++
7 files changed, 136 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c
create mode 100644 arch/arm/plat-mxc/include/mach/ahci_sata.h
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 652ace4..2b3d27c 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1380,6 +1380,14 @@ static struct clk esdhc4_mx53_clk = {
.secondary = &esdhc4_ipg_clk,
};
+static struct clk sata_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_max_enable,
+ .enable_reg = MXC_CCM_CCGR4,
+ .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+ .disable = _clk_max_disable,
+};
+
DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1468,6 +1476,9 @@ static struct clk_lookup mx53_lookups[] = {
_REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
+ _REGISTER_CLOCK(NULL, "imx_sata_clk", sata_clk)
+ _REGISTER_CLOCK(NULL, "usb_phy1", usb_phy1_clk)
+ _REGISTER_CLOCK(NULL, "ahb_clk", ahb_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index 9251008..09ebb43 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -33,3 +33,7 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst;
#define imx53_add_imx2_wdt(id, pdata) \
imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
+
+extern const struct imx_ahci_imx_data imx53_ahci_imx_data[] __initconst;
+#define imx53_add_ahci_imx(id, pdata) \
+ imx_add_ahci_imx(&imx53_ahci_imx_data[id], pdata)
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index b9ab1d5..087595a 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -71,3 +71,7 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
config IMX_HAVE_PLATFORM_SPI_IMX
bool
+
+config IMX_HAVE_PLATFORM_SATA_AHCI
+ bool
+ default y if SOC_IMX53
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index 75cd2ec..e0b7fa3 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SATA_AHCI) += platform-ahci-imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
new file mode 100644
index 0000000..a3ed6f7
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_ahci_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _SATA_BASE_ADDR, \
+ .irq = soc ## _INT_SATA, \
+ }
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
+ imx_ahci_data_entry_single(MX53);
+#endif
+
+struct platform_device *__init imx_add_ahci_imx(
+ const struct imx_ahci_imx_data *data,
+ const struct ahci_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device_dmamask("ahci", 0 /* -1? */,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/include/mach/ahci_sata.h b/arch/arm/plat-mxc/include/mach/ahci_sata.h
new file mode 100644
index 0000000..25df23e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ahci_sata.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __PLAT_MXC_AHCI_SATA_H__
+#define __PLAT_MXC_AHCI_SATA_H__
+
+enum {
+ HOST_CAP = 0x00,
+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_PORTS_IMPL = 0x0c,
+ HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+ /* Offest used to control the MPLL input clk */
+ PHY_CR_CLOCK_FREQ_OVRD = 0x12,
+ /* Port0 SATA Status */
+ PORT_SATA_SR = 0x128,
+ /* Port0 PHY Control */
+ PORT_PHY_CTL = 0x178,
+ /* PORT_PHY_CTL bits */
+ PORT_PHY_CTL_CAP_ADR_LOC = 0x10000,
+ PORT_PHY_CTL_CAP_DAT_LOC = 0x20000,
+ PORT_PHY_CTL_WRITE_LOC = 0x40000,
+ PORT_PHY_CTL_READ_LOC = 0x80000,
+ /* Port0 PHY Status */
+ PORT_PHY_SR = 0x17c,
+ /* PORT_PHY_SR */
+ PORT_PHY_STAT_DATA_LOC = 0,
+ PORT_PHY_STAT_ACK_LOC = 18,
+ /* SATA PHY Register */
+ SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT = 0x0001,
+ SATA_PHY_CR_CLOCK_DAC_CTL = 0x0008,
+ SATA_PHY_CR_CLOCK_RTUNE_CTL = 0x0009,
+ SATA_PHY_CR_CLOCK_ADC_OUT = 0x000A,
+ SATA_PHY_CR_CLOCK_MPLL_TST = 0x0017,
+};
+
+#endif /* __PLAT_MXC_AHCI_SATA_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 8658c9c..81baca6 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -264,3 +264,13 @@ struct imx_spi_imx_data {
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata);
+
+#include <linux/ahci_platform.h>
+struct imx_ahci_imx_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_ahci_imx(
+ const struct imx_ahci_imx_data *data,
+ const struct ahci_platform_data *pdata);
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms
2011-03-14 9:55 [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Richard Zhu
@ 2011-03-14 14:50 ` Jeff Garzik
2011-03-15 9:22 ` Sascha Hauer
1 sibling, 0 replies; 6+ messages in thread
From: Jeff Garzik @ 2011-03-14 14:50 UTC (permalink / raw)
To: linux-arm-kernel
On 03/14/2011 05:55 AM, Richard Zhu wrote:
> Signed-off-by: Richard Zhu<Hong-Xing.Zhu@freescale.com>
> ---
> arch/arm/mach-mx5/clock-mx51-mx53.c | 11 +++++
> arch/arm/mach-mx5/devices-imx53.h | 4 ++
> arch/arm/plat-mxc/devices/Kconfig | 4 ++
> arch/arm/plat-mxc/devices/Makefile | 1 +
> arch/arm/plat-mxc/devices/platform-ahci-imx.c | 55 +++++++++++++++++++++++
> arch/arm/plat-mxc/include/mach/ahci_sata.h | 51 +++++++++++++++++++++
> arch/arm/plat-mxc/include/mach/devices-common.h | 10 ++++
> 7 files changed, 136 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c
> create mode 100644 arch/arm/plat-mxc/include/mach/ahci_sata.h
Acked-by: Jeff Garzik <jgarzik@redhat.com>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms
2011-03-14 9:55 [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Richard Zhu
2011-03-14 14:50 ` Jeff Garzik
@ 2011-03-15 9:22 ` Sascha Hauer
2011-03-16 9:49 ` Zhu Richard-R65037
1 sibling, 1 reply; 6+ messages in thread
From: Sascha Hauer @ 2011-03-15 9:22 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Mar 14, 2011 at 05:55:43PM +0800, Richard Zhu wrote:
> Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com>
> ---
> arch/arm/mach-mx5/clock-mx51-mx53.c | 11 +++++
> arch/arm/mach-mx5/devices-imx53.h | 4 ++
> arch/arm/plat-mxc/devices/Kconfig | 4 ++
> arch/arm/plat-mxc/devices/Makefile | 1 +
> arch/arm/plat-mxc/devices/platform-ahci-imx.c | 55 +++++++++++++++++++++++
> arch/arm/plat-mxc/include/mach/ahci_sata.h | 51 +++++++++++++++++++++
> arch/arm/plat-mxc/include/mach/devices-common.h | 10 ++++
> 7 files changed, 136 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c
> create mode 100644 arch/arm/plat-mxc/include/mach/ahci_sata.h
>
> diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
> index 652ace4..2b3d27c 100644
> --- a/arch/arm/mach-mx5/clock-mx51-mx53.c
> +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
> @@ -1380,6 +1380,14 @@ static struct clk esdhc4_mx53_clk = {
> .secondary = &esdhc4_ipg_clk,
> };
>
> +static struct clk sata_clk = {
> + .parent = &ipg_clk,
> + .enable = _clk_max_enable,
> + .enable_reg = MXC_CCM_CCGR4,
> + .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
> + .disable = _clk_max_disable,
> +};
> +
> DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
> DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
> DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
> @@ -1468,6 +1476,9 @@ static struct clk_lookup mx53_lookups[] = {
> _REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk)
> _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
> _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
> + _REGISTER_CLOCK(NULL, "imx_sata_clk", sata_clk)
help!
The NULL pointer here really should be "ahci" to associate this clock
with the device it is used with. Then think about the "imx_sata_clk" string.
The information "imx" is not relevant. "sata" is redundant as it is
already associated with the ahci device. We are talking about a field
in clocks, so no need for "clk". This should read:
_REGISTER_CLOCK("ahci", NULL, sata_clk)
> + _REGISTER_CLOCK(NULL, "usb_phy1", usb_phy1_clk)
> + _REGISTER_CLOCK(NULL, "ahb_clk", ahb_clk)
no _clk please.
> };
>
> static void clk_tree_init(void)
> diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
> index 9251008..09ebb43 100644
> --- a/arch/arm/mach-mx5/devices-imx53.h
> +++ b/arch/arm/mach-mx5/devices-imx53.h
> @@ -33,3 +33,7 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
> extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst;
> #define imx53_add_imx2_wdt(id, pdata) \
> imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
> +
> +extern const struct imx_ahci_imx_data imx53_ahci_imx_data[] __initconst;
> +#define imx53_add_ahci_imx(id, pdata) \
> + imx_add_ahci_imx(&imx53_ahci_imx_data[id], pdata)
> diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
> index b9ab1d5..087595a 100644
> --- a/arch/arm/plat-mxc/devices/Kconfig
> +++ b/arch/arm/plat-mxc/devices/Kconfig
> @@ -71,3 +71,7 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
>
> config IMX_HAVE_PLATFORM_SPI_IMX
> bool
> +
> +config IMX_HAVE_PLATFORM_SATA_AHCI
> + bool
> + default y if SOC_IMX53
> diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
> index 75cd2ec..e0b7fa3 100644
> --- a/arch/arm/plat-mxc/devices/Makefile
> +++ b/arch/arm/plat-mxc/devices/Makefile
> @@ -22,3 +22,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
> obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
> obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
> obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
> +obj-$(CONFIG_IMX_HAVE_PLATFORM_SATA_AHCI) += platform-ahci-imx.o
> +
> +#ifdef CONFIG_SOC_IMX53
> +const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
> + imx_ahci_data_entry_single(MX53);
> +#endif
> +
> +struct platform_device *__init imx_add_ahci_imx(
> + const struct imx_ahci_imx_data *data,
> + const struct ahci_platform_data *pdata)
> +{
> + struct resource res[] = {
> + {
> + .start = data->iobase,
> + .end = data->iobase + SZ_4K - 1,
> + .flags = IORESOURCE_MEM,
> + }, {
> + .start = data->irq,
> + .end = data->irq,
> + .flags = IORESOURCE_IRQ,
> + },
> + };
> +
> + return imx_add_platform_device_dmamask("ahci", 0 /* -1? */,
I think it doesn't matter much if you use o or -1 here, but please
remove the comment. btw if you keep 0 here you must use "ahci.0" in
registering the clock.
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 6+ messages in thread
* [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms
2011-03-15 9:22 ` Sascha Hauer
@ 2011-03-16 9:49 ` Zhu Richard-R65037
0 siblings, 0 replies; 6+ messages in thread
From: Zhu Richard-R65037 @ 2011-03-16 9:49 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sascha:
Thanks for your comments.
Best Regards
Richard Zhu
> -----Original Message-----
> From: Sascha Hauer [mailto:s.hauer at pengutronix.de]
> Sent: Tuesday, March 15, 2011 5:22 PM
> To: Zhu Richard-R65037
> Cc: linux-arm-kernel at lists.infradead.org; jgarzik at pobox.com;
> kernel at pengutronix.de; linux-ide at vger.kernel.org;
> avorontsov at ru.mvista.com; eric at eukrea.com; eric.miao at linaro.org
> Subject: Re: [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53
> platforms
>
> On Mon, Mar 14, 2011 at 05:55:43PM +0800, Richard Zhu wrote:
> > Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com>
> > ---
> > arch/arm/mach-mx5/clock-mx51-mx53.c | 11 +++++
> > arch/arm/mach-mx5/devices-imx53.h | 4 ++
> > arch/arm/plat-mxc/devices/Kconfig | 4 ++
> > arch/arm/plat-mxc/devices/Makefile | 1 +
> > arch/arm/plat-mxc/devices/platform-ahci-imx.c | 55
> +++++++++++++++++++++++
> > arch/arm/plat-mxc/include/mach/ahci_sata.h | 51
> +++++++++++++++++++++
> > arch/arm/plat-mxc/include/mach/devices-common.h | 10 ++++
> > 7 files changed, 136 insertions(+), 0 deletions(-) create mode
> > 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c
> > create mode 100644 arch/arm/plat-mxc/include/mach/ahci_sata.h
> >
> > diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c
> > b/arch/arm/mach-mx5/clock-mx51-mx53.c
> > index 652ace4..2b3d27c 100644
> > --- a/arch/arm/mach-mx5/clock-mx51-mx53.c
> > +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
> > @@ -1380,6 +1380,14 @@ static struct clk esdhc4_mx53_clk = {
> > .secondary = &esdhc4_ipg_clk,
> > };
> >
> > +static struct clk sata_clk = {
> > + .parent = &ipg_clk,
> > + .enable = _clk_max_enable,
> > + .enable_reg = MXC_CCM_CCGR4,
> > + .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
> > + .disable = _clk_max_disable,
> > +};
> > +
> > DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4,
> > MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
> > DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4,
> > MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
> DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET,
> NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk); @@ -1468,6 +1476,9 @@ static
> struct clk_lookup mx53_lookups[] = {
> > _REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk)
> > _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
> > _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
> > + _REGISTER_CLOCK(NULL, "imx_sata_clk", sata_clk)
>
> help!
>
> The NULL pointer here really should be "ahci" to associate this clock
> with the device it is used with. Then think about the "imx_sata_clk"
> string.
> The information "imx" is not relevant. "sata" is redundant as it is
> already associated with the ahci device. We are talking about a field in
> clocks, so no need for "clk". This should read:
>
> _REGISTER_CLOCK("ahci", NULL, sata_clk)
Accepted.
>
> > + _REGISTER_CLOCK(NULL, "usb_phy1", usb_phy1_clk)
> > + _REGISTER_CLOCK(NULL, "ahb_clk", ahb_clk)
>
> no _clk please.
Accepted.
>
> > };
> >
> > static void clk_tree_init(void)
> > diff --git a/arch/arm/mach-mx5/devices-imx53.h
> > b/arch/arm/mach-mx5/devices-imx53.h
> > index 9251008..09ebb43 100644
> > --- a/arch/arm/mach-mx5/devices-imx53.h
> > +++ b/arch/arm/mach-mx5/devices-imx53.h
> > @@ -33,3 +33,7 @@ extern const struct imx_spi_imx_data
> > imx53_ecspi_data[] __initconst; extern const struct imx_imx2_wdt_data
> imx53_imx2_wdt_data[] __initconst;
> > #define imx53_add_imx2_wdt(id, pdata) \
> > imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
> > +
> > +extern const struct imx_ahci_imx_data imx53_ahci_imx_data[]
> __initconst;
> > +#define imx53_add_ahci_imx(id, pdata) \
> > + imx_add_ahci_imx(&imx53_ahci_imx_data[id], pdata)
> > diff --git a/arch/arm/plat-mxc/devices/Kconfig
> > b/arch/arm/plat-mxc/devices/Kconfig
> > index b9ab1d5..087595a 100644
> > --- a/arch/arm/plat-mxc/devices/Kconfig
> > +++ b/arch/arm/plat-mxc/devices/Kconfig
> > @@ -71,3 +71,7 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
> >
> > config IMX_HAVE_PLATFORM_SPI_IMX
> > bool
> > +
> > +config IMX_HAVE_PLATFORM_SATA_AHCI
> > + bool
> > + default y if SOC_IMX53
> > diff --git a/arch/arm/plat-mxc/devices/Makefile
> > b/arch/arm/plat-mxc/devices/Makefile
> > index 75cd2ec..e0b7fa3 100644
> > --- a/arch/arm/plat-mxc/devices/Makefile
> > +++ b/arch/arm/plat-mxc/devices/Makefile
> > @@ -22,3 +22,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) +=
> > platform-mxc_rnga.o
> > obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
> > obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) +=
> > platform-sdhci-esdhc-imx.o
> > obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
> > +obj-$(CONFIG_IMX_HAVE_PLATFORM_SATA_AHCI) += platform-ahci-imx.o
> > +
> > +#ifdef CONFIG_SOC_IMX53
> > +const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
> > + imx_ahci_data_entry_single(MX53);
> > +#endif
> > +
> > +struct platform_device *__init imx_add_ahci_imx(
> > + const struct imx_ahci_imx_data *data,
> > + const struct ahci_platform_data *pdata) {
> > + struct resource res[] = {
> > + {
> > + .start = data->iobase,
> > + .end = data->iobase + SZ_4K - 1,
> > + .flags = IORESOURCE_MEM,
> > + }, {
> > + .start = data->irq,
> > + .end = data->irq,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > + };
> > +
> > + return imx_add_platform_device_dmamask("ahci", 0 /* -1? */,
>
> I think it doesn't matter much if you use o or -1 here, but please remove
> the comment. btw if you keep 0 here you must use "ahci.0" in registering
> the clock.
>
Accepted.
>
> --
> Pengutronix e.K. |
> |
> Industrial Linux Solutions | http://www.pengutronix.de/
> |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0
> |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555
> |
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-03-16 9:49 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-10 8:59 [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Richard Zhu
2011-03-10 8:59 ` [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Richard Zhu
-- strict thread matches above, loose matches on Subject: below --
2011-03-14 9:55 [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Richard Zhu
2011-03-14 14:50 ` Jeff Garzik
2011-03-15 9:22 ` Sascha Hauer
2011-03-16 9:49 ` Zhu Richard-R65037
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).