From mboxrd@z Thu Jan 1 00:00:00 1970 From: ohad@wizery.com (Ohad Ben-Cohen) Date: Mon, 14 Mar 2011 16:24:25 +0200 Subject: [PATCH] omap: zoom: host should not pull up wl1271's irq line Message-ID: <1300112665-6253-1-git-send-email-ohad@wizery.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The wl1271's irq line is completely controlled by the 1271 device, and the host does not not need to pull it up. While there's no functional effect, letting the host pull this line up is just redundant, and wastes power. Signed-off-by: Ohad Ben-Cohen --- arch/arm/mach-omap2/board-zoom.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index e26754c..c59d07b 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -49,7 +49,7 @@ static void __init omap_zoom_init_irq(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* WLAN IRQ - GPIO 162 */ - OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), /* WLAN POWER ENABLE - GPIO 101 */ OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), /* WLAN SDIO: MMC3 CMD */ -- 1.7.1