From: ithamar.adema@team-embedded.nl (Ithamar R. Adema)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/9] lpc2k: Exception vector handling
Date: Thu, 17 Mar 2011 16:54:17 +0100 [thread overview]
Message-ID: <1300377264-10843-3-git-send-email-ithamar.adema@team-embedded.nl> (raw)
In-Reply-To: <1300377264-10843-1-git-send-email-ithamar.adema@team-embedded.nl>
Since the LPC2K does not have an MMU (ARM7TDMI based), it expects the vectors to be
stored in on-chip SRAM. However, this moves the vectors too far away from the stubs
page, requiring the vector jumps to be indirect.
Since now VECTOR_BASE is below PHYS_OFFSET, do not try to reserve the vector
page, as it will fail (and prevent the kernel from booting).
Also, commit 247055aa (6384/1: Remove the domain switching on ARMv6k/v7 CPUs) broke
the placement of vectors in the !MMU case, so fix this too.
Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl>
---
arch/arm/Kconfig | 1 +
arch/arm/kernel/entry-armv.S | 18 ++++++++++++++++++
arch/arm/kernel/traps.c | 2 +-
arch/arm/mm/nommu.c | 2 ++
4 files changed, 22 insertions(+), 1 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 331540d..9c12d71 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -186,6 +186,7 @@ config VECTORS_BASE
hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
default DRAM_BASE if REMAP_VECTORS_TO_RAM
+ default 0x40000000 if ARCH_LPC2K
default 0x00000000
help
The base address of exception vectors.
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index e8d8856..618a971 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1208,6 +1208,7 @@ __stubs_end:
.globl __vectors_start
__vectors_start:
+#ifndef CONFIG_ARCH_LPC2K
ARM( swi SYS_ERROR0 )
THUMB( svc #0 )
THUMB( nop )
@@ -1218,6 +1219,23 @@ __vectors_start:
W(b) vector_addrexcptn + stubs_offset
W(b) vector_irq + stubs_offset
W(b) vector_fiq + stubs_offset
+#else /* CONFIG_ARCH_LPC2K */
+ swi SYS_ERROR0
+ ldr pc, .vector_und
+ ldr pc, .vector_swi
+ ldr pc, .vector_pabt
+ ldr pc, .vector_dabt
+ ldr pc, .vector_addrexcptn
+ ldr pc, .vector_irq
+ ldr pc, .vector_fiq
+.vector_und: .word vector_und
+.vector_swi: .word vector_swi
+.vector_pabt: .word vector_pabt
+.vector_dabt: .word vector_dabt
+.vector_addrexcptn: .word vector_addrexcptn
+.vector_irq: .word vector_irq
+.vector_fiq: .word vector_fiq
+#endif
.globl __vectors_end
__vectors_end:
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 21ac43f..639c4c8 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -758,7 +758,7 @@ static void __init kuser_get_tls_init(unsigned long vectors)
void __init early_trap_init(void)
{
-#if defined(CONFIG_CPU_USE_DOMAINS)
+#if defined(CONFIG_CPU_USE_DOMAINS) || !defined(CONFIG_MMU)
unsigned long vectors = CONFIG_VECTORS_BASE;
#else
unsigned long vectors = (unsigned long)vectors_page;
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 687d023..e3bec02 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -24,7 +24,9 @@ void __init arm_mm_memblock_reserve(void)
* some architectures which the DRAM is the exception vector to trap,
* alloc_page breaks with error, although it is not NULL, but "0."
*/
+#if PHYS_OFFSET <= CONFIG_VECTORS_BASE
memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
+#endif
}
/*
--
1.7.1
next prev parent reply other threads:[~2011-03-17 15:54 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-17 15:54 [PATCH 0/9] Support for NXP LPC2K SoCs Ithamar R. Adema
2011-03-17 15:54 ` [PATCH 1/9] lpc2k: Core support Ithamar R. Adema
2011-03-17 21:26 ` Jamie Iles
2011-03-17 21:32 ` Vitaly Wool
2011-03-17 21:50 ` Ithamar R. Adema
2011-03-17 22:08 ` Kevin Wells
2011-03-17 22:25 ` Ithamar R. Adema
2011-03-17 15:54 ` Ithamar R. Adema [this message]
2011-03-17 16:18 ` [PATCH 2/9] lpc2k: Exception vector handling Uwe Kleine-König
2011-03-17 16:28 ` Ithamar R. Adema
2011-03-18 0:43 ` Greg Ungerer
2011-03-17 15:54 ` [PATCH 3/9] lpc2k: clk API Ithamar R. Adema
2011-03-17 22:08 ` Kevin Wells
2011-03-18 9:44 ` Ithamar R. Adema
2011-03-17 22:16 ` Kevin Wells
2011-03-17 22:29 ` Ithamar R. Adema
2011-03-17 15:54 ` [PATCH 4/9] lpc2k: generic time and clockevents Ithamar R. Adema
2011-03-17 21:38 ` Jamie Iles
2011-03-17 22:00 ` Ithamar R. Adema
2011-03-17 15:54 ` [PATCH 5/9] lpc2k: gpiolib Ithamar R. Adema
2011-03-17 15:54 ` [PATCH 6/9] lpc2k: multifunction pin configuration Ithamar R. Adema
2011-03-17 15:54 ` [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board Ithamar R. Adema
2011-03-17 22:07 ` Kevin Wells
2011-03-17 22:18 ` Ithamar R. Adema
2011-03-17 22:33 ` Kevin Wells
2011-03-17 22:49 ` Ithamar R. Adema
2011-03-17 15:54 ` [PATCH 8/9] lpc2k: Add UART, SSP, and MCI devices Ithamar R. Adema
2011-03-17 15:54 ` [PATCH 9/9] lpc2k: defconfig for NXP LPC2K platform Ithamar R. Adema
2011-03-17 17:18 ` [PATCH 0/9] Support for NXP LPC2K SoCs Kevin Wells
2011-03-18 0:45 ` Greg Ungerer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300377264-10843-3-git-send-email-ithamar.adema@team-embedded.nl \
--to=ithamar.adema@team-embedded.nl \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).