From: b32955@freescale.com (Huang Shijie)
To: linux-arm-kernel@lists.infradead.org
Subject: [ PATCH V2 7/7] MTD : add GPMI driver in the config and Makefile
Date: Fri, 25 Mar 2011 18:23:01 +0800 [thread overview]
Message-ID: <1301048581-21321-8-git-send-email-b32955@freescale.com> (raw)
In-Reply-To: <1301048581-21321-1-git-send-email-b32955@freescale.com>
add the GPMI driver in the relevant Kconfig and Makefile in the MTD.
Signed-off-by: Huang Shijie <b32955@freescale.com>
---
drivers/mtd/nand/Kconfig | 10 ++++++++++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/gpmi-nfc/Makefile | 7 +++++++
3 files changed, 18 insertions(+), 0 deletions(-)
create mode 100644 drivers/mtd/nand/gpmi-nfc/Makefile
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 450afc5..86effe8 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -426,6 +426,16 @@ config MTD_NAND_NANDSIM
The simulator may simulate various NAND flash chips for the
MTD nand layer.
+config MTD_NAND_GPMI_NFC
+ bool "GPMI NAND Flash Controller driver"
+ depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+ select MTD_PARTITIONS
+ help
+ Enables NAND Flash support for IMX23 or IMX28.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 8ad6fae..80d1f08 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -48,5 +48,6 @@ obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NFC) += gpmi-nfc/
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/gpmi-nfc/Makefile b/drivers/mtd/nand/gpmi-nfc/Makefile
new file mode 100644
index 0000000..4811303
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nfc/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_MTD_NAND_GPMI_NFC) += gpmi-nfc.o
+gpmi-nfc-objs += gpmi-nfc-main.o
+gpmi-nfc-objs += hal-imx23.o
+gpmi-nfc-objs += hal-imx28.o
+gpmi-nfc-objs += rom-imx23.o
+gpmi-nfc-objs += rom-imx28.o
+gpmi-nfc-objs += ../nand_device_info.o
--
1.7.0.4
next prev parent reply other threads:[~2011-03-25 10:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-25 10:22 [ PATCH V2 0/7] add the GPMI controller driver for IMX23/IMX28 Huang Shijie
2011-03-25 10:22 ` [ PATCH V2 1/7] ARM: add GPMI support for imx23/imx28 Huang Shijie
2011-03-25 10:22 ` [ PATCH V2 2/7] dmaengine: change the flags of request_irq() Huang Shijie
2011-03-25 10:22 ` [ PATCH V2 3/7] MTD : add the database for the NANDs Huang Shijie
2011-03-25 10:34 ` Florian Fainelli
2011-03-28 2:00 ` Huang Shijie
2011-03-31 10:00 ` Artem Bityutskiy
2011-03-31 10:12 ` Huang Shijie
2011-03-25 10:22 ` [ PATCH V2 4/7] MTD : add the common code for GPMI controller driver Huang Shijie
2011-03-26 0:01 ` Russell King - ARM Linux
2011-03-28 2:04 ` Huang Shijie
2011-03-25 10:23 ` [ PATCH V2 6/7] MTD : add GPMI support for imx28 Huang Shijie
2011-03-25 10:23 ` Huang Shijie [this message]
2011-03-25 15:36 ` [ PATCH V2 0/7] add the GPMI controller driver for IMX23/IMX28 Lothar Waßmann
2011-03-25 15:39 ` Wolfram Sang
2011-03-28 2:06 ` Huang Shijie
2011-03-28 2:34 ` Huang Shijie
2011-03-28 7:01 ` Lothar Waßmann
2011-03-28 7:38 ` Huang Shijie
2011-07-08 17:38 ` [ PATCH V2 5/7] MTD : add GPMI support for imx23 Huang Shijie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301048581-21321-8-git-send-email-b32955@freescale.com \
--to=b32955@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).