[PATCH v3] ARM: mx5/mx53_evk.c: Add LED support

[fabio.estevam@freescale.com (Fabio Estevam)]

On the mx53evk board there is an LED connected to GPIO7_7.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/mach-mx5/board-mx53_evk.c |   19 +++++++++++++++++++
 1 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 2af3f43..3e4e40b 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -37,6 +37,7 @@
 #define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
 #define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
 #define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
+#define MX53EVK_LED		IMX_GPIO_NR(7, 7)
 
 #include "crm_regs.h"
 #include "devices-imx53.h"
@@ -60,6 +61,8 @@ static iomux_v3_cfg_t mx53_evk_pads[] = {
 	/* ecspi chip select lines */
 	MX53_PAD_EIM_EB2__GPIO2_30,
 	MX53_PAD_EIM_D19__GPIO3_19,
+	/* LED */
+	MX53_PAD_PATA_DA_1__GPIO7_7,
 };
 
 static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
@@ -117,6 +120,20 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = {
 	.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
 };
 
+static struct gpio_led mx53_evk_leds[] = {
+	{
+		.name			= "led-green",
+		.default_trigger	= "heartbeat",
+		.active_low		= 0,
+		.gpio			= MX53EVK_LED,
+	},
+};
+
+static struct gpio_led_platform_data mx53_evk_leds_data = {
+	.leds = mx53_evk_leds,
+	.num_leds = ARRAY_SIZE(mx53_evk_leds),
+};
+
 static void __init mx53_evk_board_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
@@ -135,6 +152,8 @@ static void __init mx53_evk_board_init(void)
 		ARRAY_SIZE(mx53_evk_spi_board_info));
 	imx53_add_ecspi(0, &mx53_evk_spi_data);
 	imx53_add_imx2_wdt(0, NULL);
+	platform_device_register_resndata(NULL, "leds-gpio", -1,
+		NULL, 0, &mx53_evk_leds_data, sizeof(mx53_evk_leds_data));
 }
 
 static void __init mx53_evk_timer_init(void)
-- 
1.6.0.4