From: per.forlin@linaro.org (Per Forlin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 11/12] omap_hsmmc: add support for pre_req and post_req
Date: Wed, 6 Apr 2011 21:07:12 +0200 [thread overview]
Message-ID: <1302116833-24540-12-git-send-email-per.forlin@linaro.org> (raw)
In-Reply-To: <1302116833-24540-1-git-send-email-per.forlin@linaro.org>
pre_req() runs dma_map_sg() post_req() runs dma_unmap_sg.
If not calling pre_req() before omap_hsmmc_request(), request()
will prepare the cache just like it did it before.
It is optional to use pre_req() and post_req().
Signed-off-by: Per Forlin <per.forlin@linaro.org>
---
drivers/mmc/host/omap_hsmmc.c | 87 +++++++++++++++++++++++++++++++++++++++--
1 files changed, 83 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index ad3731a..2116c09 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -141,6 +141,11 @@
#define OMAP_HSMMC_WRITE(base, reg, val) \
__raw_writel((val), (base) + OMAP_HSMMC_##reg)
+struct omap_hsmmc_next {
+ unsigned int dma_len;
+ s32 cookie;
+};
+
struct omap_hsmmc_host {
struct device *dev;
struct mmc_host *mmc;
@@ -184,6 +189,7 @@ struct omap_hsmmc_host {
int reqs_blocked;
int use_reg;
int req_in_progress;
+ struct omap_hsmmc_next next_data;
struct omap_mmc_platform_data *pdata;
};
@@ -1344,8 +1350,9 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data)
return;
}
- dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
- omap_hsmmc_get_dma_dir(host, data));
+ if (!data->host_cookie)
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ omap_hsmmc_get_dma_dir(host, data));
req_in_progress = host->req_in_progress;
dma_ch = host->dma_ch;
@@ -1363,6 +1370,45 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data)
}
}
+static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host,
+ struct mmc_data *data,
+ struct omap_hsmmc_next *next)
+{
+ int dma_len;
+
+ if (!next && data->host_cookie &&
+ data->host_cookie != host->next_data.cookie) {
+ printk(KERN_WARNING "[%s] invalid cookie: data->host_cookie %d"
+ " host->next_data.cookie %d\n",
+ __func__, data->host_cookie, host->next_data.cookie);
+ data->host_cookie = 0;
+ }
+
+ /* Check if next job is already prepared */
+ if (next ||
+ (!next && data->host_cookie != host->next_data.cookie)) {
+ dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len,
+ omap_hsmmc_get_dma_dir(host, data));
+
+ } else {
+ dma_len = host->next_data.dma_len;
+ host->next_data.dma_len = 0;
+ }
+
+
+ if (dma_len == 0)
+ return -EINVAL;
+
+ if (next) {
+ next->dma_len = dma_len;
+ data->host_cookie = ++next->cookie < 0 ? 1 : next->cookie;
+ } else
+ host->dma_len = dma_len;
+
+ return 0;
+}
+
/*
* Routine to configure and start DMA for the MMC card
*/
@@ -1396,9 +1442,10 @@ static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host,
mmc_hostname(host->mmc), ret);
return ret;
}
+ ret = omap_hsmmc_pre_dma_transfer(host, data, NULL);
+ if (ret)
+ return ret;
- host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len, omap_hsmmc_get_dma_dir(host, data));
host->dma_ch = dma_ch;
host->dma_sg_idx = 0;
@@ -1478,6 +1525,35 @@ omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req)
return 0;
}
+static void omap_hsmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
+ int err)
+{
+ struct omap_hsmmc_host *host = mmc_priv(mmc);
+ struct mmc_data *data = mrq->data;
+
+ if (host->use_dma) {
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ omap_hsmmc_get_dma_dir(host, data));
+ data->host_cookie = 0;
+ }
+}
+
+static void omap_hsmmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq,
+ bool is_first_req)
+{
+ struct omap_hsmmc_host *host = mmc_priv(mmc);
+
+ if (mrq->data->host_cookie) {
+ mrq->data->host_cookie = 0;
+ return ;
+ }
+
+ if (host->use_dma)
+ if (omap_hsmmc_pre_dma_transfer(host, mrq->data,
+ &host->next_data))
+ mrq->data->host_cookie = 0;
+}
+
/*
* Request function. for read/write operation
*/
@@ -1926,6 +2002,8 @@ static int omap_hsmmc_disable_fclk(struct mmc_host *mmc, int lazy)
static const struct mmc_host_ops omap_hsmmc_ops = {
.enable = omap_hsmmc_enable_fclk,
.disable = omap_hsmmc_disable_fclk,
+ .post_req = omap_hsmmc_post_req,
+ .pre_req = omap_hsmmc_pre_req,
.request = omap_hsmmc_request,
.set_ios = omap_hsmmc_set_ios,
.get_cd = omap_hsmmc_get_cd,
@@ -2075,6 +2153,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
host->mapbase = res->start;
host->base = ioremap(host->mapbase, SZ_4K);
host->power_mode = MMC_POWER_OFF;
+ host->next_data.cookie = 1;
platform_set_drvdata(pdev, host);
INIT_WORK(&host->mmc_carddetect_work, omap_hsmmc_detect);
--
1.7.4.1
next prev parent reply other threads:[~2011-04-06 19:07 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-06 19:07 [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency Per Forlin
2011-04-06 19:07 ` [PATCH v2 01/12] mmc: add none blocking mmc request function Per Forlin
2011-04-15 10:34 ` David Vrabel
2011-04-20 7:17 ` Per Forlin
2011-04-26 13:29 ` David Vrabel
2011-04-26 14:22 ` Per Forlin
2011-04-06 19:07 ` [PATCH v2 02/12] mmc: mmc_test: add debugfs file to list all tests Per Forlin
2011-04-06 19:07 ` [PATCH v2 03/12] mmc: mmc_test: add test for none blocking transfers Per Forlin
2011-04-17 7:09 ` Lin Tony-B19295
2011-04-20 7:30 ` Per Forlin
2011-04-17 15:46 ` Shawn Guo
2011-04-20 7:41 ` Per Forlin
2011-04-06 19:07 ` [PATCH v2 04/12] mmc: add member in mmc queue struct to hold request data Per Forlin
2011-04-06 19:07 ` [PATCH v2 05/12] mmc: add a block request prepare function Per Forlin
2011-04-06 19:07 ` [PATCH v2 06/12] mmc: move error code in mmc_block_issue_rw_rq to a separate function Per Forlin
2011-04-06 19:07 ` [PATCH v2 07/12] mmc: add a second mmc queue request member Per Forlin
2011-04-06 19:07 ` [PATCH v2 08/12] mmc: add handling for two parallel block requests in issue_rw_rq Per Forlin
2011-04-20 11:32 ` Per Forlin
2011-04-06 19:07 ` [PATCH v2 09/12] mmc: test: add random fault injection in core.c Per Forlin
2011-04-06 19:07 ` [PATCH v2 10/12] omap_hsmmc: use original sg_len for dma_unmap_sg Per Forlin
2011-04-06 19:07 ` Per Forlin [this message]
2011-04-06 19:07 ` [PATCH v2 12/12] mmci: implement pre_req() and post_req() Per Forlin
2011-04-08 16:49 ` [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency Linus Walleij
2011-04-09 11:55 ` Jae hoon Chung
2011-04-10 3:33 ` anish singh
2011-04-11 9:03 ` Per Forlin
2011-04-11 9:07 ` Sachin Nikam
2011-04-11 9:08 ` Per Forlin
2011-04-19 14:30 ` Jae hoon Chung
2011-04-16 15:48 ` Shawn Guo
2011-04-20 8:19 ` Per Forlin
2011-04-16 16:48 ` [PATCH] mmc: sdhci: add support for pre_req and post_req Shawn Guo
2011-04-16 23:06 ` Andrei Warkentin
2011-04-22 11:01 ` Jaehoon Chung
2011-04-27 0:59 ` Andrei Warkentin
2011-04-26 1:26 ` Jaehoon Chung
2011-04-26 2:47 ` Shawn Guo
2011-04-26 10:21 ` Per Forlin
2011-04-17 16:33 ` [PATCH] mmc: mxs-mmc: " Shawn Guo
2011-04-17 16:48 ` Shawn Guo
2011-04-20 8:01 ` Per Forlin
2011-04-20 14:01 ` Shawn Guo
2011-04-20 15:22 ` Per Forlin
2011-04-21 6:25 ` Shawn Guo
2011-04-21 8:52 ` Per Forlin
2011-04-20 15:30 ` Per Forlin
2011-04-21 6:29 ` Shawn Guo
2011-04-21 8:46 ` Per Forlin
2011-04-21 9:11 ` Shawn Guo
2011-04-21 9:47 ` Per Forlin
2011-04-21 10:15 ` Per Forlin
2011-04-28 7:52 ` Per Forlin
2011-04-28 10:10 ` Russell King - ARM Linux
2011-04-20 7:58 ` Per Forlin
2011-04-20 8:17 ` Shawn Guo
2011-04-20 13:51 ` [PATCH v2] " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302116833-24540-12-git-send-email-per.forlin@linaro.org \
--to=per.forlin@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).