From: per.forlin@linaro.org (Per Forlin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/12] mmc: add a second mmc queue request member
Date: Wed, 6 Apr 2011 21:07:08 +0200 [thread overview]
Message-ID: <1302116833-24540-8-git-send-email-per.forlin@linaro.org> (raw)
In-Reply-To: <1302116833-24540-1-git-send-email-per.forlin@linaro.org>
Add an additional mmc queue request instance to make way for
two active block requests. One request may be active while the
other request is being prepared.
Signed-off-by: Per Forlin <per.forlin@linaro.org>
---
drivers/mmc/card/queue.c | 44 ++++++++++++++++++++++++++++++++++++++++++--
drivers/mmc/card/queue.h | 3 ++-
2 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 40e18b5..eef3510 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -130,6 +130,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
u64 limit = BLK_BOUNCE_HIGH;
int ret;
struct mmc_queue_req *mqrq_cur = &mq->mqrq[0];
+ struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
limit = *mmc_dev(host)->dma_mask;
@@ -140,7 +141,9 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
return -ENOMEM;
memset(&mq->mqrq_cur, 0, sizeof(mq->mqrq_cur));
+ memset(&mq->mqrq_prev, 0, sizeof(mq->mqrq_prev));
mq->mqrq_cur = mqrq_cur;
+ mq->mqrq_prev = mqrq_prev;
mq->queue->queuedata = mq;
blk_queue_prep_rq(mq->queue, mmc_prep_request);
@@ -181,9 +184,17 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
"allocate bounce cur buffer\n",
mmc_card_name(card));
}
+ mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+ if (!mqrq_prev->bounce_buf) {
+ printk(KERN_WARNING "%s: unable to "
+ "allocate bounce prev buffer\n",
+ mmc_card_name(card));
+ kfree(mqrq_cur->bounce_buf);
+ mqrq_cur->bounce_buf = NULL;
+ }
}
- if (mqrq_cur->bounce_buf) {
+ if (mqrq_cur->bounce_buf && mqrq_prev->bounce_buf) {
blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY);
blk_queue_max_hw_sectors(mq->queue, bouncesz / 512);
blk_queue_max_segments(mq->queue, bouncesz / 512);
@@ -198,11 +209,19 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
if (ret)
goto cleanup_queue;
+ mqrq_prev->sg = mmc_alloc_sg(1, &ret);
+ if (ret)
+ goto cleanup_queue;
+
+ mqrq_prev->bounce_sg =
+ mmc_alloc_sg(bouncesz / 512, &ret);
+ if (ret)
+ goto cleanup_queue;
}
}
#endif
- if (!mqrq_cur->bounce_buf) {
+ if (!mqrq_cur->bounce_buf && !mqrq_prev->bounce_buf) {
blk_queue_bounce_limit(mq->queue, limit);
blk_queue_max_hw_sectors(mq->queue,
min(host->max_blk_count, host->max_req_size / 512));
@@ -213,6 +232,10 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
if (ret)
goto cleanup_queue;
+
+ mqrq_prev->sg = mmc_alloc_sg(host->max_segs, &ret);
+ if (ret)
+ goto cleanup_queue;
}
sema_init(&mq->thread_sem, 1);
@@ -229,6 +252,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
free_bounce_sg:
kfree(mqrq_cur->bounce_sg);
mqrq_cur->bounce_sg = NULL;
+ kfree(mqrq_prev->bounce_sg);
+ mqrq_prev->bounce_sg = NULL;
cleanup_queue:
kfree(mqrq_cur->sg);
@@ -236,6 +261,11 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
kfree(mqrq_cur->bounce_buf);
mqrq_cur->bounce_buf = NULL;
+ kfree(mqrq_prev->sg);
+ mqrq_prev->sg = NULL;
+ kfree(mqrq_prev->bounce_buf);
+ mqrq_prev->bounce_buf = NULL;
+
blk_cleanup_queue(mq->queue);
return ret;
}
@@ -245,6 +275,7 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
struct request_queue *q = mq->queue;
unsigned long flags;
struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
+ struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
/* Make sure the queue isn't suspended, as that will deadlock */
mmc_queue_resume(mq);
@@ -267,6 +298,15 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
kfree(mqrq_cur->bounce_buf);
mqrq_cur->bounce_buf = NULL;
+ kfree(mqrq_prev->bounce_sg);
+ mqrq_prev->bounce_sg = NULL;
+
+ kfree(mqrq_prev->sg);
+ mqrq_prev->sg = NULL;
+
+ kfree(mqrq_prev->bounce_buf);
+ mqrq_prev->bounce_buf = NULL;
+
mq->card = NULL;
}
EXPORT_SYMBOL(mmc_cleanup_queue);
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 468044f..0e65807 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -28,8 +28,9 @@ struct mmc_queue {
int (*issue_fn)(struct mmc_queue *, struct request *);
void *data;
struct request_queue *queue;
- struct mmc_queue_req mqrq[1];
+ struct mmc_queue_req mqrq[2];
struct mmc_queue_req *mqrq_cur;
+ struct mmc_queue_req *mqrq_prev;
};
extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
--
1.7.4.1
next prev parent reply other threads:[~2011-04-06 19:07 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-06 19:07 [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency Per Forlin
2011-04-06 19:07 ` [PATCH v2 01/12] mmc: add none blocking mmc request function Per Forlin
2011-04-15 10:34 ` David Vrabel
2011-04-20 7:17 ` Per Forlin
2011-04-26 13:29 ` David Vrabel
2011-04-26 14:22 ` Per Forlin
2011-04-06 19:07 ` [PATCH v2 02/12] mmc: mmc_test: add debugfs file to list all tests Per Forlin
2011-04-06 19:07 ` [PATCH v2 03/12] mmc: mmc_test: add test for none blocking transfers Per Forlin
2011-04-17 7:09 ` Lin Tony-B19295
2011-04-20 7:30 ` Per Forlin
2011-04-17 15:46 ` Shawn Guo
2011-04-20 7:41 ` Per Forlin
2011-04-06 19:07 ` [PATCH v2 04/12] mmc: add member in mmc queue struct to hold request data Per Forlin
2011-04-06 19:07 ` [PATCH v2 05/12] mmc: add a block request prepare function Per Forlin
2011-04-06 19:07 ` [PATCH v2 06/12] mmc: move error code in mmc_block_issue_rw_rq to a separate function Per Forlin
2011-04-06 19:07 ` Per Forlin [this message]
2011-04-06 19:07 ` [PATCH v2 08/12] mmc: add handling for two parallel block requests in issue_rw_rq Per Forlin
2011-04-20 11:32 ` Per Forlin
2011-04-06 19:07 ` [PATCH v2 09/12] mmc: test: add random fault injection in core.c Per Forlin
2011-04-06 19:07 ` [PATCH v2 10/12] omap_hsmmc: use original sg_len for dma_unmap_sg Per Forlin
2011-04-06 19:07 ` [PATCH v2 11/12] omap_hsmmc: add support for pre_req and post_req Per Forlin
2011-04-06 19:07 ` [PATCH v2 12/12] mmci: implement pre_req() and post_req() Per Forlin
2011-04-08 16:49 ` [PATCH v2 00/12] mmc: use nonblock mmc requests to minimize latency Linus Walleij
2011-04-09 11:55 ` Jae hoon Chung
2011-04-10 3:33 ` anish singh
2011-04-11 9:03 ` Per Forlin
2011-04-11 9:07 ` Sachin Nikam
2011-04-11 9:08 ` Per Forlin
2011-04-19 14:30 ` Jae hoon Chung
2011-04-16 15:48 ` Shawn Guo
2011-04-20 8:19 ` Per Forlin
2011-04-16 16:48 ` [PATCH] mmc: sdhci: add support for pre_req and post_req Shawn Guo
2011-04-16 23:06 ` Andrei Warkentin
2011-04-22 11:01 ` Jaehoon Chung
2011-04-27 0:59 ` Andrei Warkentin
2011-04-26 1:26 ` Jaehoon Chung
2011-04-26 2:47 ` Shawn Guo
2011-04-26 10:21 ` Per Forlin
2011-04-17 16:33 ` [PATCH] mmc: mxs-mmc: " Shawn Guo
2011-04-17 16:48 ` Shawn Guo
2011-04-20 8:01 ` Per Forlin
2011-04-20 14:01 ` Shawn Guo
2011-04-20 15:22 ` Per Forlin
2011-04-21 6:25 ` Shawn Guo
2011-04-21 8:52 ` Per Forlin
2011-04-20 15:30 ` Per Forlin
2011-04-21 6:29 ` Shawn Guo
2011-04-21 8:46 ` Per Forlin
2011-04-21 9:11 ` Shawn Guo
2011-04-21 9:47 ` Per Forlin
2011-04-21 10:15 ` Per Forlin
2011-04-28 7:52 ` Per Forlin
2011-04-28 10:10 ` Russell King - ARM Linux
2011-04-20 7:58 ` Per Forlin
2011-04-20 8:17 ` Shawn Guo
2011-04-20 13:51 ` [PATCH v2] " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302116833-24540-8-git-send-email-per.forlin@linaro.org \
--to=per.forlin@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).