From: b32955@freescale.com (Huang Shijie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 4/4] MTD : add GPMI driver in the config and Makefile
Date: Wed, 13 Apr 2011 14:24:41 +0800 [thread overview]
Message-ID: <1302675881-18862-5-git-send-email-b32955@freescale.com> (raw)
In-Reply-To: <1302675881-18862-1-git-send-email-b32955@freescale.com>
add the GPMI driver in the relevant Kconfig and Makefile in the MTD.
Signed-off-by: Huang Shijie <b32955@freescale.com>
---
drivers/mtd/nand/Kconfig | 11 +++++++++++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/gpmi-nfc/Makefile | 3 +++
3 files changed, 15 insertions(+), 0 deletions(-)
create mode 100644 drivers/mtd/nand/gpmi-nfc/Makefile
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 450afc5..25a1493 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -426,6 +426,17 @@ config MTD_NAND_NANDSIM
The simulator may simulate various NAND flash chips for the
MTD nand layer.
+config MTD_NAND_GPMI_NFC
+ bool "GPMI NAND Flash Controller driver"
+ depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+ select MTD_PARTITIONS
+ select MTD_CMDLINE_PARTS
+ help
+ Enables NAND Flash support for IMX23 or IMX28.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 8ad6fae..80d1f08 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -48,5 +48,6 @@ obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NFC) += gpmi-nfc/
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/gpmi-nfc/Makefile b/drivers/mtd/nand/gpmi-nfc/Makefile
new file mode 100644
index 0000000..7179513
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nfc/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MTD_NAND_GPMI_NFC) += gpmi-nfc.o
+gpmi-nfc-objs += gpmi-nfc-main.o
+gpmi-nfc-objs += hal-mxs.o
--
1.7.0.4
next prev parent reply other threads:[~2011-04-13 6:24 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-13 6:24 [PATCH v5 0/4] add the GPMI controller driver for IMX23/IMX28 Huang Shijie
2011-04-13 6:24 ` [PATCH v5 3/4] MTD : add support for imx23 and imx28 Huang Shijie
2011-04-13 6:24 ` Huang Shijie [this message]
2011-07-08 18:23 ` [PATCH v5 2/4] MTD : add the common code for GPMI controller driver Huang Shijie
2011-04-13 19:54 ` Lothar Waßmann
2011-04-14 2:20 ` Huang Shijie
2011-04-14 6:38 ` Lothar Waßmann
2011-04-14 6:40 ` Huang Shijie
2011-04-14 6:24 ` Lothar Waßmann
2011-04-14 6:36 ` Huang Shijie
2011-07-08 18:24 ` [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28 Huang Shijie
2011-04-13 7:41 ` Lothar Waßmann
2011-04-13 9:42 ` Huang Shijie
2011-04-13 9:03 ` Uwe Kleine-König
2011-04-13 9:52 ` Huang Shijie
2011-04-13 10:03 ` Uwe Kleine-König
2011-04-13 10:49 ` Huang Shijie
2011-04-13 11:43 ` Shawn Guo
2011-04-13 13:25 ` Huang Shijie
2011-04-13 13:51 ` Uwe Kleine-König
2011-04-14 1:19 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302675881-18862-5-git-send-email-b32955@freescale.com \
--to=b32955@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).