From: ryan@bluewatersys.com (Ryan Mallon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 23/23] at91: Remove mAgic and ISI device code
Date: Fri, 29 Apr 2011 14:59:32 +1200 [thread overview]
Message-ID: <1304045972-19319-24-git-send-email-ryan@bluewatersys.com> (raw)
In-Reply-To: <1304045972-19319-1-git-send-email-ryan@bluewatersys.com>
The AT572D940HF mAgic device and the AT91SAM9263 ISI device do not
have drivers yet and therefore the platform code in arch/arm/mach-at91
is unused and can be removed.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
---
arch/arm/mach-at91/at572d940hf_devices.c | 73 -----------------------------
arch/arm/mach-at91/at91sam9263_devices.c | 50 --------------------
arch/arm/mach-at91/board-at572d940hf_ek.c | 2 -
arch/arm/mach-at91/include/mach/board.h | 6 --
4 files changed, 0 insertions(+), 131 deletions(-)
diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c
index 9910fc8..26aa567 100644
--- a/arch/arm/mach-at91/at572d940hf_devices.c
+++ b/arch/arm/mach-at91/at572d940hf_devices.c
@@ -250,79 +250,6 @@ static struct at91_dev_table_uart device_uart2 __initdata = {
.cts_pin = {AT91_PIN_PA16, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-/* --------------------------------------------------------------------
- * mAgic
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_MAGICV
-static struct resource mAgic_resources[] = {
- {
- .start = AT91_MAGIC_PM_BASE,
- .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_I_BASE,
- .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_F_BASE,
- .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_DB_BASE,
- .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_REGS_BASE,
- .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_EXTPAGE_BASE,
- .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT572D940HF_ID_MSIRQ0,
- .end = AT572D940HF_ID_MSIRQ0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MHALT,
- .end = AT572D940HF_ID_MHALT,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MEXC,
- .end = AT572D940HF_ID_MEXC,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MEDMA,
- .end = AT572D940HF_ID_MEDMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device mAgic_device = {
- .name = "mAgic",
- .id = -1,
- .num_resources = ARRAY_SIZE(mAgic_resources),
- .resource = mAgic_resources,
-};
-
-void __init at91_add_device_mAgic(void)
-{
- platform_device_register(&mAgic_device);
-}
-#else
-void __init at91_add_device_mAgic(void) {}
-#endif
-
static struct at91_device_table at572d940hf_device_table __initdata = {
.ethernet = &device_eth,
.usbh_ohci = &device_usbh_ohci,
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b06246c..4bb42ae 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -309,56 +309,6 @@ static struct at91_dev_table_lcdc device_lcdc __initdata = {
};
/* --------------------------------------------------------------------
- * Image Sensor Interface
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-
-struct resource isi_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_ISI,
- .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9263_ID_ISI,
- .end = AT91SAM9263_ID_ISI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_isi_device = {
- .name = "at91_isi",
- .id = -1,
- .resource = isi_resources,
- .num_resources = ARRAY_SIZE(isi_resources),
-};
-
-void __init at91_add_device_isi(void)
-{
- at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
- at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
- at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
- at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
- at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
- at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
- at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
- at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
- at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
- at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
- at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
- at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
- at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
- at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
- at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
- at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
-}
-#else
-void __init at91_add_device_isi(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
* Timer/Counter block
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
index 8955133..ff62346 100644
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -312,8 +312,6 @@ static void __init eb_board_init(void)
at91_add_device_mmc(0, &eb_mmc_data);
/* Ethernet */
at91_add_device_eth(&eb_eth_data);
- /* mAgic */
- at91_add_device_mAgic();
}
MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 25a6127..33ba440 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -186,9 +186,6 @@ extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
/* AC97 */
extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
- /* ISI */
-extern void __init at91_add_device_isi(void);
-
/* Touchscreen Controller */
struct at91_tsadcc_data {
unsigned int adc_clock;
@@ -208,9 +205,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
- /* AT572D940HF DSP */
-extern void __init at91_add_device_mAgic(void);
-
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
--
1.7.0.4
next prev parent reply other threads:[~2011-04-29 2:59 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-29 2:59 [PATCH v3 00/23] Create common framework for AT91 device initialisation Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 01/23] at91: Add common devices framework Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 02/23] at91: Make Ethernet device common Ryan Mallon
2011-04-29 9:08 ` Russell King - ARM Linux
2011-04-29 9:38 ` Ryan Mallon
2011-04-29 9:54 ` Russell King - ARM Linux
2011-04-29 2:59 ` [PATCH v3 03/23] at91: Make USB OHCI/EHCI devices common Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 04/23] at91: Make UDC device common Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 05/23] at91: Make MMC " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 06/23] at91: Make NAND " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 07/23] at91: Make TWI " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 08/23] at91: Make SPI " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 09/23] at91: Make TCB " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 10/23] at91: Make RTT " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 11/23] at91: Make watchdog " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 12/23] at91: Make UART devices common Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 13/23] at91: Make PWM device common Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 14/23] at91: Make SSC " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 15/23] at91: Make AC97 " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 16/23] at91: Make LCD controller " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 17/23] at91: Make touchscreen " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 18/23] at91: Make HDMAC " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 19/23] at91: Make RTC " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 20/23] at91: Make high speed USB gadget " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 21/23] at91: Make compact flash " Ryan Mallon
2011-04-29 2:59 ` [PATCH v3 22/23] at91: Move at91sam9263 CAN device to common devices Ryan Mallon
2011-04-29 2:59 ` Ryan Mallon [this message]
2011-04-29 18:04 ` [PATCH v3 00/23] Create common framework for AT91 device initialisation H Hartley Sweeten
2011-04-29 20:14 ` Ryan Mallon
2011-05-02 19:46 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304045972-19319-24-git-send-email-ryan@bluewatersys.com \
--to=ryan@bluewatersys.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).