From: govindraj.raja@ti.com (Govindraj.R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/12] OMAP2+: Serial: Runtime adaptation + cleanup
Date: Fri, 29 Apr 2011 18:09:44 +0530 [thread overview]
Message-ID: <1304080796-625-1-git-send-email-govindraj.raja@ti.com> (raw)
Converting uart driver to adapt to pm runtime api's.
Code re-org + cleanup.
Moving some functionality from serial.c to omap-serial.c
Changes involves:
================
1.) Cleaning up certain uart calls from sram_idle func.
2.) Removed all types of uart clock handling code from serial.c
3.) Using hwmod_mux api enable wakeup capability for uart pad during
hwmod_idle state i.e., when uart clocks are disabled we can enable
io-pad wakeup capability for uart if mux_data is available for
given uart. Also during during resume from idle call to uart we need
to enable clocks back conditionally and this can be done only when io-pad
wakeup event bit is set for uart_rx pad. So we need a hwmod api
which can probe the uart pad and let us know whether a uart wakeup
happened. So omap_hmwod_pad_wakeup_status api is added to meet this
requirement.
3.) Adapted omap-serial driver to use runtime api's.
4.) Modify serial_init calls to accept certain uart parameters from board file.
5.) using resume_call to enable uart port back untill we have irq_chaining available.
Patch series is based on Kevin's PM Tree / pm-core branch [2.6.39-rc4]
Patch series hosted at https://gitorious.org/uart_runtime/pm
Testing updates:
----------------
3430SDP:
retention, off_mode, system_wide suspend is tested.
(earlyprintk & no_console_suspend checked)
OMAP3630 - Zoom3:
pm-retention checked, off mode for per domain checked.
[uart3/uart4 in per domain on omap3630].
[ZOOM3 tested with uart3 as console uart and pm-ret checked]
OMAP4430-SDP: Boot tested.
OMAP2420/2430SDP: Boot tested.
-------------
Deepak K (1):
OMAP: Serial: Allow UART parameters to be configured from board file
Govindraj.R (10):
OMAP2+: UART: Remove certain uart calls from sram_idle
OMAP2+: UART: Remove uart clock handling code from serial.c
OMAP2+: Serial: Add default mux for all uarts.
Serial: OMAP: Add runtime pm support for omap-serial driver
OMAP: Serial: Hold console lock for console usage.
Serial: OMAP2+: Move erratum handling from serial.c
OMAP3: Serial: Remove uart pads from 3430 board file.
OMAP2+: hwmod: Add api to enable io_ring wakeup.
OMAP: Serial: Use resume call from prcm to enable uart
OMAP2: Serial: Add no async wake flag.
Jon Hunter (1):
Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each
UART
arch/arm/mach-omap2/board-2430sdp.c | 3 +-
arch/arm/mach-omap2/board-3430sdp.c | 101 +---
arch/arm/mach-omap2/board-4430sdp.c | 11 +-
arch/arm/mach-omap2/board-am3517evm.c | 3 +-
arch/arm/mach-omap2/board-apollon.c | 3 +-
arch/arm/mach-omap2/board-cm-t35.c | 3 +-
arch/arm/mach-omap2/board-cm-t3517.c | 3 +-
arch/arm/mach-omap2/board-devkit8000.c | 3 +-
arch/arm/mach-omap2/board-generic.c | 3 +-
arch/arm/mach-omap2/board-h4.c | 3 +-
arch/arm/mach-omap2/board-igep0020.c | 3 +-
arch/arm/mach-omap2/board-igep0030.c | 3 +-
arch/arm/mach-omap2/board-ldp.c | 3 +-
arch/arm/mach-omap2/board-n8x0.c | 9 +-
arch/arm/mach-omap2/board-omap3beagle.c | 3 +-
arch/arm/mach-omap2/board-omap3evm.c | 3 +-
arch/arm/mach-omap2/board-omap3logic.c | 3 +-
arch/arm/mach-omap2/board-omap3pandora.c | 3 +-
arch/arm/mach-omap2/board-omap3stalker.c | 3 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 3 +-
arch/arm/mach-omap2/board-omap4panda.c | 11 +-
arch/arm/mach-omap2/board-overo.c | 3 +-
arch/arm/mach-omap2/board-rm680.c | 3 +-
arch/arm/mach-omap2/board-rx51.c | 3 +-
arch/arm/mach-omap2/board-ti8168evm.c | 2 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 3 +-
arch/arm/mach-omap2/mux.c | 23 +
arch/arm/mach-omap2/mux.h | 13 +
arch/arm/mach-omap2/omap_hwmod.c | 47 ++
arch/arm/mach-omap2/pm24xx.c | 19 +-
arch/arm/mach-omap2/pm34xx.c | 26 +-
arch/arm/mach-omap2/serial.c | 917 +++++++------------------
arch/arm/plat-omap/include/plat/omap-serial.h | 38 +-
arch/arm/plat-omap/include/plat/omap_device.h | 1 +
arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 +
arch/arm/plat-omap/include/plat/serial.h | 13 +-
arch/arm/plat-omap/omap_device.c | 34 +-
drivers/tty/serial/omap-serial.c | 319 ++++++++-
38 files changed, 747 insertions(+), 902 deletions(-)
next reply other threads:[~2011-04-29 12:39 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-29 12:39 Govindraj.R [this message]
2011-04-29 12:39 ` [PATCH v2 01/12] OMAP2+: UART: Remove certain uart calls from sram_idle Govindraj.R
2011-04-29 12:39 ` [PATCH v2 02/12] OMAP2+: UART: Remove uart clock handling code from serial.c Govindraj.R
2011-04-29 13:20 ` Alan Cox
2011-04-29 12:39 ` [PATCH v2 03/12] OMAP2+: Serial: Add default mux for all uarts Govindraj.R
2011-05-04 10:00 ` Tony Lindgren
2011-05-04 10:34 ` Govindraj
2011-04-29 12:39 ` [PATCH v2 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver Govindraj.R
2011-05-04 20:35 ` Kevin Hilman
2011-05-04 21:05 ` Paul Walmsley
2011-05-05 5:48 ` Raja, Govindraj
2011-05-05 5:55 ` Govindraj
2011-04-29 12:39 ` [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage Govindraj.R
2011-05-04 10:02 ` Tony Lindgren
2011-05-04 10:09 ` Russell King - ARM Linux
2011-05-04 10:19 ` Govindraj
2011-05-04 20:43 ` Kevin Hilman
2011-05-05 10:25 ` Govindraj
2011-05-05 14:52 ` Kevin Hilman
2011-04-29 12:39 ` [PATCH v2 06/12] Serial: OMAP2+: Move erratum handling from serial.c Govindraj.R
2011-04-29 12:39 ` [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file Govindraj.R
2011-05-04 9:55 ` Tony Lindgren
2011-05-04 10:06 ` Govindraj
2011-05-04 10:25 ` Tony Lindgren
2011-05-04 10:39 ` Govindraj
2011-04-29 12:39 ` [PATCH v2 08/12] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART Govindraj.R
2011-04-29 12:39 ` [PATCH v2 09/12] OMAP3: Serial: Remove uart pads from 3430 board file Govindraj.R
2011-04-29 12:39 ` [PATCH v2 10/12] OMAP2+: hwmod: Add api to enable io_ring wakeup Govindraj.R
2011-05-04 23:59 ` Kevin Hilman
2011-05-05 5:58 ` Govindraj
2011-04-29 12:39 ` [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart Govindraj.R
2011-05-05 0:11 ` Kevin Hilman
2011-05-05 11:46 ` Govindraj
2011-05-05 14:58 ` Kevin Hilman
2011-05-06 9:16 ` Govindraj
2011-05-06 15:55 ` Kevin Hilman
2011-05-09 12:23 ` Govindraj
2011-04-29 12:39 ` [PATCH v2 12/12] OMAP2: Serial: Add no async wake flag Govindraj.R
2011-05-05 17:32 ` Kevin Hilman
2011-05-06 9:34 ` Govindraj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304080796-625-1-git-send-email-govindraj.raja@ti.com \
--to=govindraj.raja@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).