From: jochen@scram.de (Jochen Friedrich)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 2.6.40 1/4] ARM:simpad: Add ucb1x00 GPIO definitions and register GPIO
Date: Fri, 29 Apr 2011 17:16:52 +0200 [thread overview]
Message-ID: <1304090215-7457-2-git-send-email-jochen@scram.de> (raw)
In-Reply-To: <1304090215-7457-1-git-send-email-jochen@scram.de>
Add ucb1x00 GPIO definitions to simpad.h and add gpio_base
to ucb1x00 platform device so the pins are available using
the GPIO API.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
---
arch/arm/mach-sa1100/include/mach/simpad.h | 13 +++++++++++++
arch/arm/mach-sa1100/simpad.c | 1 +
2 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
index 9296c45..231550d 100644
--- a/arch/arm/mach-sa1100/include/mach/simpad.h
+++ b/arch/arm/mach-sa1100/include/mach/simpad.h
@@ -48,6 +48,19 @@
#define GPIO_SMART_CARD GPIO_GPIO10
#define IRQ_GPIO_SMARD_CARD IRQ_GPIO10
+/*--- ucb1x00 GPIO ---*/
+#define SIMPAD_UCB1X00_GPIO_BASE (GPIO_MAX + 1)
+#define SIMPAD_UCB1X00_GPIO_PROG1 (SIMPAD_UCB1X00_GPIO_BASE)
+#define SIMPAD_UCB1X00_GPIO_PROG2 (SIMPAD_UCB1X00_GPIO_BASE + 1)
+#define SIMPAD_UCB1X00_GPIO_UP (SIMPAD_UCB1X00_GPIO_BASE + 2)
+#define SIMPAD_UCB1X00_GPIO_DOWN (SIMPAD_UCB1X00_GPIO_BASE + 3)
+#define SIMPAD_UCB1X00_GPIO_LEFT (SIMPAD_UCB1X00_GPIO_BASE + 4)
+#define SIMPAD_UCB1X00_GPIO_RIGHT (SIMPAD_UCB1X00_GPIO_BASE + 5)
+#define SIMPAD_UCB1X00_GPIO_6 (SIMPAD_UCB1X00_GPIO_BASE + 6)
+#define SIMPAD_UCB1X00_GPIO_7 (SIMPAD_UCB1X00_GPIO_BASE + 7)
+#define SIMPAD_UCB1X00_GPIO_HEADSET (SIMPAD_UCB1X00_GPIO_BASE + 8)
+#define SIMPAD_UCB1X00_GPIO_SPEAKER (SIMPAD_UCB1X00_GPIO_BASE + 9)
+
// CS3 Latch is write only, a shadow is necessary
#define CS3BUSTYPE unsigned volatile long
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index cfb7607..718b802 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -132,6 +132,7 @@ static struct resource simpad_flash_resources [] = {
static struct mcp_plat_data simpad_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
+ .gpio_base = SIMPAD_UCB1X00_GPIO_BASE,
};
--
1.7.4.1
next prev parent reply other threads:[~2011-04-29 15:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-29 15:16 [PATCHv4 2.6.40 0/4] ARM: simpad: Add support for GPIO attached hardware Jochen Friedrich
2011-04-29 15:16 ` Jochen Friedrich [this message]
2011-04-29 15:16 ` [PATCHv4 2.6.40 2/4] ARM:simpad: Cleanup CS3 accessors Jochen Friedrich
2011-04-29 15:16 ` [PATCHv4 2.6.40 3/4] ARM:simpad: add GPIO based device definitions Jochen Friedrich
2011-04-29 15:16 ` [PATCHv4 2.6.40 4/4] ARM: simpad: replace ARM specific LED code Jochen Friedrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304090215-7457-2-git-send-email-jochen@scram.de \
--to=jochen@scram.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).