[Patch v2] AM35xx-Craneboard:Display: Add DVI and TV Support

[srinath@mistralsolutions.com (srinath at mistralsolutions.com)]

From: Srinath.R <srinath@mistralsolutions.com>

Added Display (DVI and TV) support for CraneBoard.

History:
https://patchwork.kernel.org/patch/740761/

Signed-off-by: Srinath.R <srinath@mistralsolutions.com>
---
 arch/arm/mach-omap2/board-am3517crane.c |   73 +++++++++++++++++++++++++++++++
 1 files changed, 73 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 05867b5..26fa565 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -29,12 +29,15 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/usb.h>
+#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 
 #include "mux.h"
 #include "control.h"
 
 #define GPIO_USB_POWER		35
 #define GPIO_USB_NRESET		38
+#define GPIO_DVI_ENABLE		52
 
 
 /* Board initialization */
@@ -66,11 +69,78 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+static void __init am3517_crane_display_init(void)
+{
+	int ret;
+
+	ret = omap_mux_init_gpio(GPIO_DVI_ENABLE, OMAP_PIN_OUTPUT);
+	if (ret < 0) {
+		pr_err("Can not configure mux for GPIO_DVI_ENABLE %d\n",
+			GPIO_DVI_ENABLE);
+		return;
+	}
+
+	ret = gpio_request_one(GPIO_DVI_ENABLE, GPIOF_OUT_INIT_HIGH,
+				"dvi_enable");
+	if (ret < 0) {
+		pr_err("Can not request GPIO %d\n", GPIO_DVI_ENABLE);
+		return;
+	}
+
+}
+
+static struct omap_dss_device am3517_crane_tv_device = {
+	.type                   = OMAP_DISPLAY_TYPE_VENC,
+	.name                   = "tv",
+	.driver_name            = "venc",
+	.phy.venc.type          = OMAP_DSS_VENC_TYPE_COMPOSITE,
+	.platform_enable        = NULL,
+	.platform_disable       = NULL,
+};
+
+static int am3517_crane_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(GPIO_DVI_ENABLE, 1);
+	return 0;
+}
+
+static void am3517_crane_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(GPIO_DVI_ENABLE, 0);
+}
+
+
+static struct panel_generic_dpi_data dvi_panel = {
+	.name                   = "generic",
+	.platform_enable        = am3517_crane_panel_enable_dvi,
+	.platform_disable       = am3517_crane_panel_disable_dvi,
+};
+
+static struct omap_dss_device am3517_crane_dvi_device = {
+	.type                   = OMAP_DISPLAY_TYPE_DPI,
+	.name                   = "dvi",
+	.driver_name            = "generic_dpi_panel",
+	.data                   = &dvi_panel,
+	.phy.dpi.data_lines     = 24,
+};
+
+static struct omap_dss_device *am3517_crane_dss_devices[] = {
+	&am3517_crane_tv_device,
+	&am3517_crane_dvi_device,
+};
+
+static struct omap_dss_board_info am3517_crane_dss_data = {
+	.num_devices    = ARRAY_SIZE(am3517_crane_dss_devices),
+	.devices        = am3517_crane_dss_devices,
+	.default_device = &am3517_crane_dvi_device,
+};
+
 static void __init am3517_crane_init(void)
 {
 	int ret;
 
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_display_init(&am3517_crane_dss_data);
 	omap_serial_init();
 
 	omap_board_config = am3517_crane_config;
@@ -103,6 +173,9 @@ static void __init am3517_crane_init(void)
 	}
 
 	usbhs_init(&usbhs_bdata);
+
+	/* DSS */
+	am3517_crane_display_init();
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
-- 
1.5.3.4